Cisco 210-065 Dumps 2021

NEW QUESTION 1

Which two video endpoints can you set back to factory reset by using physical button presses? (Choose two.)

• A. Cisco TelePresence C40
• B. Cisco TelePresence EX90
• C. Cisco TelePresence C60
• D. Cisco TelePresence SX20
• E. Cisco TelePresence C90

Answer: BD

NEW QUESTION 2

Refer to the exhibit.

The numbers on the floor plan represent the horizontal average lux readings for nine different room areas. Considering Cisco best practices, what can you conclude about the lighting conditions?

• A. Only three areas meet the room lighting levels that are recommended by Cisco.
• B. Only three areas do not meet the room lighting levels that are recommended by Cisco.
• C. All areas meet the room lighting levels that are recommended by Cisco.
• D. The areas do not meet the room lighting levels that are recommended by Cisco.

Answer: B

NEW QUESTION 3

Which two of these are considered to be provisioning and scheduling management tools in a Cisco TelePresence environment? (Choose two.)

• A. Cisco TelePresence Manager
• B. Cisco Video Surveillance Operations Manager
• C. Cisco TelePresence Management Suite
• D. Cisco TelePresence Multipoint Control Unit
• E. Cisco Video Surveillance Management Server

Answer: AC

NEW QUESTION 4

Management would like to set up a permanent recurring Cisco TelePresence meeting where the team would dial into to a preconfigured number. Which meeting type should be used?

• A. scheduled conference
• B. ad hoc conference
• C. rendezvous conference
• D. multiway conference

Answer: C

NEW QUESTION 5

Which of the following will allow you to add a multipoint call using the local display?

• A. Multiway
• B. Multisite
• C. Multiconference
• D. Meetingplace

Answer: B

NEW QUESTION 6

To which Ethernet port on a Cisco TelePresence System (500/1x00/1300/3xx0) endpoint would a technician need to connect to manually assign a static IP address for first-time setup?

• A. IP phone port
• B. network port
• C. camera port
• D. auxiliary network port

Answer: D

NEW QUESTION 7

Which two parameters of the license management set log level product_instances CLI command on the Cisco Prime License Manager are valid? (Choose two.)

• A. warning
• B. error
• C. emergencies
• D. critical
• E. alert

Answer: AB

NEW QUESTION 8

A video conference user that is connected via a Cisco TelePresence Codec C40 to a conference that is hosted on a Cisco TelePresence MCU 5300 would like to switch the local layout view. Which two options describe how to switch the local layout view without affecting the view of remote users? (Choose two.)

• A. Use the Administrator settings from the local touch control.
• B. Use the Participant settings from the MCU 5300 web interface.
• C. Use the Call settings from the remote control.
• D. Use the Call Control settings from the codec web interface.
• E. Use the Conference settings from the codec web interface.

Answer: BD

NEW QUESTION 9

A customer is looking for a Cisco TelePresence Immersive System that is designed for at least seven participants. Which two products meet this customer's requirements? (Choose two.)

• A. Cisco TelePresence CTS3022
• B. Cisco TelePresence TX9000
• C. Cisco TelePresence TX9200
• D. Cisco TelePresence IX5000
• E. Cisco TelePresence IX5200
• F. Cisco TelePresence TX1310-65

Answer: CE

NEW QUESTION 10

When a call is placed from a Cisco VCS registered SIP-only endpoint to an H.323-only endpoint, which type of call license is consumed?

• A. traversal call
• B. non-traversal call
• C. on-net call
• D. interworking call
• E. off-net call
• F. Cisco Unified Workspace Licensing

Answer: A

NEW QUESTION 11

A customer reports that in a CTS1300 room, a microphone switches to a segment that has no one talking. Which step is first in the troubleshooting process?

• A. Replace the microphones to stop phantom switching.
• B. Reseat the microphone cables.
• C. Recalibrate the microphones.
• D. Reboot the codec.
• E. Replace the audio expansion box because the microphones connect to an AV expansion box.

Answer: C

NEW QUESTION 12

Which of these involves combining visual elements from separate sources into a single image?

• A. interlacing
• B. compositing
• C. video conferencing
• D. interleaving

Answer: B

NEW QUESTION 13

Which Cisco feature upscales SD and low-bandwidth video participants up to four times, allows them to appear closer to HD in a video call, and is supported on Cisco MCU and Cisco TelePresence Server multiparty solutions?

• A. ClearPath
• B. ClearVision
• C. WebEx enabled TelePresence
• D. Active Presence
• E. Individual Transcoding

Answer: B

NEW QUESTION 14

Refer to the exhibit.

Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two.)

• A. The Cisco Unified Communications Manager IM and Presence Service is not available.
• B. The username and password in Cisco Jabber phone services are misconfigured.
• C. The Cisco Jabber initial audio and video settings need to be set.
• D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager.
• E. The Cisco Jabber does not have the correct phone button template and hence cannot register to the Cisco Unified Communications Manager.
• F. The called user presence status is unknown.

Answer: BD

NEW QUESTION 15

A customer is unable to receive calls on the EX90 endpoint, but can make outbound calls. The endpoint uses CUCM for call control and registration. If the engineer only has remote access to the EX90 and CUCM, what are the next two troubleshooting steps? (Choose two.)

• A. Check CUCM to see if the extension is in a reachable partition.
• B. Check CUCM to see if the endpoint has the correct Device Calling Search Space
• C. Check CUCM to see if the endpoint is registered
• D. Check the EX90 System Status
• E. Check EX90 DND Status via WebAdmin

Answer: CD

NEW QUESTION 16

How many participants if you have 20 licenses screen?

• A. 1
• B. 5
• C. 10
• D. 20
• E. 40

Answer: D

NEW QUESTION 17

A video engineer configured Cisco TMS to allow conference scheduling. The engineer set the Default Reservation Type for Scheduled Calls to Automatic Connect. Which option describes what this action accomplished?

• A. No conference resources are scheduled until a Cisco TelePresence form is selected.
• B. Calls are set up and launched by the organizer.
• C. WebEx invites for conferencing are sent automatically.
• D. Conferences are automatically started at the scheduled time.

Answer: D

NEW QUESTION 18

Endpoint for immersive telepresence:

• A. EX 90
• B. TX 9000
• C. SX 10
• D. DX 70

Answer: B

NEW QUESTION 19

Refer to the exhibit.

A network engineer is attempting to register a Cisco TelePresence endpoint to a Cisco VCS. What is the most likely cause of this failure?

• A. The lab.local SIP domain is not configured in the Cisco VCS allow list for registration.
• B. The Cisco VCS failed to bind to the LDAP server, which is where the lab.local SIP domain is learned.
• C. The lab.local SIP domain does not exist on the Cisco VCS.
• D. The endpoint does not have the proper port assignments configured for SIP signaling.
• E. The endpoint uses the TCP protocol and the Cisco VCS is configured to allow only TLS for SIP registrations.

Answer: C

NEW QUESTION 20

Which personal Cisco TelePresence unit can be used as a replacement for a person's computer monitor on their desk?

• A. EX90
• B. MX800
• C. TX9000
• D. SX10
• E. SX80

Answer: A

NEW QUESTION 21

Which component of the Cisco Digital Media Suite is responsible for transcoding and transrating?

• A. Cisco DMD
• B. Cisco TMS
• C. Cisco MXE
• D. Cisco DMM

Answer: C

NEW QUESTION 22

A conference has been scheduled two hours in advance. When does Cisco TelePresence Management Suite run diagnostics for system tickets that can affect the conference setup?

• A. 15 minutes prior to the scheduled start time
• B. 1 minute prior to the scheduled start time
• C. 10 minutes prior to the scheduled start time
• D. 5 minutes prior to the scheduled start time

Answer: A

NEW QUESTION 23

In a Cisco TelePresence MX300 G2, what is the minimum bandwidth for 1080p30?

• A. 768 kbps
• B. 1152 kbps
• C. 1472 kbps
• D. 1873 kbps
• E. 2560 kbps

Answer: C

NEW QUESTION 24

A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.)

• A. The codec firmware version is below version TC 6.1.
• B. The codec and the Touch 8 are on separate subnets.
• C. Pairing visibility mode is not active on the codec.
• D. The codec is not compatible with a Touch 8 device.
• E. The Touch 8 is connected via the second Ethernet port on the codec.

Answer: BC

NEW QUESTION 25

Which well-known port is used to access the Cisco IP Video Surveillance Operations Manager via a secure, ActiveX web session?

• A. 20
• B. 80
• C. 421
• D. 434
• E. 443
• F. 8080

Answer: E

NEW QUESTION 26

On the Cisco VCS-E, what is the default port number for the H.323 connection on the first traversal zone between a Cisco VCS-C and Cisco VCS-E?

• A. 1719
• B. 1720
• C. 5060
• D. 6001
• E. 7001

Answer: D

NEW QUESTION 27

An engineer must ensure that a user can create content playlists for Digital Signs and Show and Share. Which Cisco Digital Media Suite component allows playlists to be created?

• A. Cisco DMD
• B. Cisco DMM
• C. Cisco TMS
• D. Cisco MXE

Answer: B

NEW QUESTION 28

Refer to the exhibit.

You are deploying a Cisco VCS Expressway with the Advanced Networking option key into two separate DMZs. Gateways for all networks are the lowest usable IP address in the subnet. While you are logged in as an admin user, which command should you enter into the CLI, to enable IP routing to the Cisco VCS Control and nothing else on the internal network?

• A. xConfiguration IP Gateway: 172.18.105.1
• B. xConfiguration RouteAdd Address:192.168.10.25 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1
• C. xCommand RouteAdd Address:192.168.0.0 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1
• D. xCommand RouteAdd Address:192.168.10.25 PrefixLength:32 Gateway: 172.18.105.1 Interface: LAN1

Answer: D

NEW QUESTION 29

In the H.264 video codec, which type of video frame is sent when the remote side requests a fast picture update?

• A. I-frame
• B. P-frame
• C. B-frame
• D. C-frame

Answer: A

NEW QUESTION 30

An engineer is deploying a Cisco Media Experience Engine 3500 to provide various capabilities for ingesting and processing video media and production capabilities. Which two advances does the Cisco MXE 3500 provide? (Choose two.)

• A. automated graphical integration that can embed metadata overlays on videos during processing
• B. over 2 terabytes of storage for both local and streaming media applications
• C. automated ingesting of video files based on watch folders
• D. clustering capability of up to 20 resource nodes to handle and balance incoming media requests and processing
• E. live output abilities to provide DV, DVC Pro, DVC Pro 50, and DVC Pro HD format streams
• F. ability to create VoD file outputs to WebEx ARF format

Answer: AC

NEW QUESTION 31
......