Rebirth 300-175 Courses 2021

NEW QUESTION 1

Which three AAA protocols are supported for communication with external AAA providers? (Choose three.)

• A. TACACS+
• B. RADIUS
• C. AD
• D. LDAP
• E. ACS
• F. 802.1X

Answer: ABD

Explanation:
Cisco UCS supports two methods to authenticate user logins: Through user accounts local to Cisco UCS Manager Remotely through one of the following protocols:
LDAP RADIUS TACACS+
Reference: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration

NEW QUESTION 2

Which two tasks enable jumbo frames on a Cisco UCS system? (Choose two.)

• A. In the LAN cloud on Cisco UCS Manager, configure MTU 9000 in the uplink interfaces.
• B. In the LAN cloud on Cisco UCS Manager, enable jumbo frames in Fabric A and Fabric B.
• C. In the LAN cloud on Cisco UCS Manager, configure MTU 9000 in the VLAN.
• D. In the LAN cloud on Cisco UCS Manager, define a QoS system class with MTU 9000.
• E. In the service profile, configure MTU 9000 in the vNIC.
• F. In the service profile, configure MTU 9000 in the virtual machine.
• G. In the service profile, configure MTU 9000 in the uplink interfaces.

Answer: DE

NEW QUESTION 3

Which consideration must be made when utilizing a WWxN pool?

• A. Only HBA templates can use WWxN pools.
• B. WWNN assignment must be set to derived.
• C. WWPN assignment must be set to derived.
• D. A SAN connectivity policy must be used.

Answer: C

NEW QUESTION 4

Refer to the exhibit.

Which result of the configuration is true?

• A. The usNIC replaces any vNICs in the server.
• B. The kernel is bypassed when sending networking packets.
• C. Device-specific DMA translations are cached on the fabric interconnect only
• D. All network traffic goes to the OS kernel directly.

Answer: D

NEW QUESTION 5

Refer to the exhibit.

Which description of the result is true?

• A. An Ethernet monitoring session was created where traffic may be copied and forwarded to slot 1 port 9 for analysis.
• B. An Ethernet monitoring session was created, activated and committed.
• C. Ethernet traffic from slot 9 port 1 will be copied and forwarded to the destination SPAN port for analysis.
• D. Ethernet traffic from slot 1 port 9 will be copied and forwarded to the destination SPAN port for analysis.

Answer: A

NEW QUESTION 6

You are connecting a Fibre Channel storage array to Cisco UCS What is a prerequisite to configuring Fibre Channel traffic ?

• A. The VSAN requires a dedicated FCoE VLAN
• B. The VSAN ID must match the FCoE VLAN ID
• C. The VSAN ID must differ from the VLAN ID
• D. The VLANs and the FCoE VLANs can have the same ID

Answer: A

NEW QUESTION 7

Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager. Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.



Refer to the screenshot in Exhibit 5. Which of the following user roles allows the permission Clear All Logs?

• A. read-only
• B. user
• C. operator
• D. system

Answer: C

Explanation:

Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/20/b_UCSM_GUI_Configura

NEW QUESTION 8

Which four Cisco UCS components use the Cisco NX-OS syslog services to generate syslog entries for system information and alerts? (Choose four.)

• A. I/O module
• B. fabric interconnect
• C. chassis
• D. Cisco Integrated Management Controller
• E. Cisco UCS Manager
• F. adapter
• G. Ethernet uplink
• H. storage module

Answer: ADEF

NEW QUESTION 9

When using VM-FEX, the new VMs are not connected, but existing VMs are unaffected. Which option describes the most likely cause?

• A. Binding is set to ephemeral on the DVS, but it must be set to static.
• B. Dynamic NICs have been exhausted.
• C. Hostd on the host has stopped responding to Cisco UCS Manager.
• D. The adapter has failed.

Answer: B

NEW QUESTION 10

View the Exhibit.

Refer to the exhibit. Which two media types can you mount from the KVM console? (Choose two.)

• A. VHD
• B. ISO
• C. VMDK
• D. IMG
• E. VHDx

Answer: BD

Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration 4
"Opens the Open dialog box that lets you navigate to the ISO or IMG file you want to the server to access."

NEW QUESTION 11

When configuring roles in the Cisco UCS C-Series, which role should be assigned for a person who must be allowed to power on the server and install a hypervisor using virtual media, but not allowed to configure other Cisco Integrated Management Controller settings?

• A. VM admin
• B. user
• C. admin
• D. read-only

Answer: B

NEW QUESTION 12

In the Create Dynamic vNIC Connection Policy dialog box, there is a configurable field titled Protection. What is the significance of the three choices for Protection?

• A. allows reserve vNICs to be allocated out of the spares pool
• B. enables hardware-based failover
• C. enables static binding of the VM port profile to dynamic vNICs
• D. selects the primary fabric association for dynamic vNICs
• E. allows dynamic vNICs to be reserved for fabric failover

Answer: D

NEW QUESTION 13

You need to enable Cisco UCS Manager to support out-of-band IPv4 address access to the Cisco UCS KVM Direct launch page from a web browser.
What should you enable?

• A. SMASH CLP
• B. CIM XML
• C. SNMP
• D. CIMC Web Service

Answer: D

Explanation:
-Cisco UCS Manager supports out-of-band IPv4 address access to the Cisco UCS KVM Direct launch page from a web browser. To provide this access, you must enable the following service: CIMC Web Service
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/3-0/b_UCSM_GUI_User_G

NEW QUESTION 14

When performing a backup through Cisco UCS Manager, which backup type must you do to backup locally authenticated users?

• A. System configuration
• B. All configuration
• C. Full State
• D. Logical Configuration

Answer: A

NEW QUESTION 15

You want to modify a service profile that is bound to an updating template. Which description of the relationship between the service profile and the updating template is true?

• A. The service profile is updated after the server reboots.
• B. The service profile is updated automatically when the updating template changes.
• C. Change to the updating template apply only to service profile created after template after the template is updated.
• D. The updating template can be changed only before the service profile is implemented

Answer: D

NEW QUESTION 16

Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)

• A. End-host mode presents a link to a northbound uplink switch as a host trunk with loop detection that is provided by STP.
• B. For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches.
• C. A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses.
• D. Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches.
• E. A MAC forwarding table is not used to forward traffic to the uplink switch.
• F. A MAC address forwarding table is maintained for server-to-server communications across VLANs.

Answer: DE

NEW QUESTION 17

You must define a workload using Cisco UCS Manager. Drag and drop the workload definition tasks from the left into the correct order on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Define organizational hierarchy Define Pools
Configure Adapters
Configure Service Profile Templates Configure Server Policies

NEW QUESTION 18

An admin wants to make sure that for each VLAN added to a vNIC, a static MAC address entry is added to the fabric interconnect. Which setting within Cisco UCS Manager accomplishes this task?

• A. The MAC Register Mode in the network control policy is set to Only Native VLAN.
• B. The MAC Register Mode in the LAN connectivity policy is set to All Host VLANs.
• C. The MAC Register Mode in the network control policy is set to All Host VLANs.
• D. The MAC Register Mode in the LAN connectivity policy is set to Only Native VLAN.
• E. The MAC Register Mode in the link protocol policy is set to All Host VLANs.
• F. The MAC Register Mode in the link protocol policy is set to Only Native VLAN.

Answer: C

NEW QUESTION 19

Which of the following supports more than two component-resident versions of firmware?

• A. mezzanine adapters
• B. I/O modules
• C. Cisco UCS fabric interconnects
• D. CIMCs

Answer: C

Explanation:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/110511-ucs-fw-mgmt-00.h https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/FirmwareMgmt/3

NEW QUESTION 20

Which statement is true regarding backup operations in Cisco UCS Manager?

• A. A user can perform incremental backups of a system configuration.
• B. Passwords and other sensitive information are encrypted in full state backups.
• C. Scheduled backups are not available.
• D. Each backup destination can have multiple backup operations.

Answer: B

NEW QUESTION 21

Which Cisco UCS firmware are contained in the Cisco UCS Infrastructure software bundle? (Choose three.)

• A. Cisco UCS BIOS
• B. Cisco UCS fabric interconnects firmware
• C. Cisco UCS adapters
• D. Cisco UCS Manager
• E. Cisco I/O module firmware
• F. Cisco IMC

Answer: BDE

NEW QUESTION 22

Which two parameters are used by Cisco UCS for automatic Fibre Channel uplink pinning?

• A. server WWN
• B. MDS WWNN
• C. VSAN membership
• D. hash algorithm
• E. vHBA MAC address

Answer: AC

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/3-0/b_UCSM_GUI_User_G https://
www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_

NEW QUESTION 23

Refer to the Exhibit.

Refer to the Exhibit. Which two components are needed to create an IQN suffix pool?

• A. description
• B. iSCSI vNlC
• C. prefix
• D. IQN block
• E. initiator IP address

Answer: BC

NEW QUESTION 24

In a standalone Cisco UCS C-Series server, which recommendations can be used to upgrade the BIOS?

• A. Cisco IMC
• B. Cisco UCS Manager
• C. iFlash32 Utility
• D. Flash ROM Utility
• E. EFI Interface
• F. Cisco Host Upgrade Utility
• G. USB Flash Utility

Answer: F

NEW QUESTION 25

Which backup option must be used for a system restore?

• A. full state
• B. all configuration
• C. system configuration
• D. logical configuration
• E. incremental

Answer: A

NEW QUESTION 26

A network administrator has configured all required settings for the Smart Call Home feature in Cisco UCS. What must be done next?

• A. Open a TAC case to verify contract information and start the registration process.
• B. Generate a fault to initiate a message that will start the registration process.
• C. The system automatically starts the registration process and no further action is required.
• D. Send a system inventory message to start the registration process.

Answer: D

NEW QUESTION 27

Which of the following is true concerning Fibre Channel communications on a Cisco Unified Computing System?

• A. Each VSAN requires a dedicated VLAN to carry FCoE traffic.
• B. FCoE VLANs are created like Ethernet VLANs on Cisco Unified Computing System Manager.
• C. FCoE VLANs may overlap with Ethernet VLANs.
• D. Cisco Unified Computing System Manager supports a maximum of 128 active VSANs.

Answer: A

NEW QUESTION 28

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
to allow local management of the cluster to be configured.

NEW QUESTION 29

When performing a backup through Cisco UCS Manager, which backup type must you to backup locally authenticated users?

• A. System configuration
• B. All configuration
• C. Full State
• D. Logical Configuration

Answer: A

Explanation:
System configuration - An XML file that includes all system configuration settings such as usernames, roles, and locales. You can use the file generated from this backup to import these configuration settings to the original fabric interconnect or to a different fabric interconnect. You cannot use this file for a system restore.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configu

NEW QUESTION 30
......