How Many Questions Of 300-410 Testing Software
Master the 300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) content and be ready for exam day success quickly with this Actualtests 300-410 rapidshare. We guarantee it!We make it a reality and give you real 300-410 questions in our Cisco 300-410 braindumps.Latest 100% VALID Cisco 300-410 Exam Questions Dumps at below page. You can use our Cisco 300-410 braindumps and pass your exam.
Free demo questions for Cisco 300-410 Exam Dumps Below:
NEW QUESTION 1
Which statement about route distinguishers in an MPLS network is true?
- A. Route distinguishers allow multiple instances of a routing table to coexist within the edge router.
- B. Route distinguishers are used for label bindings.
- C. Route distinguishers make a unique VPNv4 address across the MPLS network.
- D. Route distinguishers define which prefixes are imported and exported on the edge router.
Answer: C
NEW QUESTION 2
Refer to the exhibit.
An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?
- A. Dynamic routing protocols always have priority over static routes.
- B. The metric of the OSPF route is lower than the metric of the static route.
- C. The configured AD for the static route is higher than the AD of OSPF.
- D. The syntax of the static route is not valid, so the route is not considered.
Answer: C
NEW QUESTION 3
Refer to the exhibit.
Network operations cannot read or write any configuration on the device with this
configuration from the operations subnet. Which two configurations fix the issue? (Choose two.)
- A. Configure SNMP rw permission in addition to community ciscotest.
- B. Modify access list 1 and allow operations subnet in the access list.
- C. Modify access list 1 and allow SNMP in the access list.
- D. Configure SNMP rw permission in addition to version 1.
- E. Configure SNMP rw permission in addition to community ciscotest 1.
Answer: AB
NEW QUESTION 4
Refer to the exhibits.
Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands are missing? (Choose two.)
- A. The ip nhrp redirect command is missing on the spoke routers.
- B. The ip nhrp shortcut command is missing on the spoke routers.
- C. The ip nhrp redirect command is missing on the hub router.
- D. The ip nhrp shortcut command is missing on the hub router.
- E. The ip nhrp map command is missing on the hub router.
Answer: BC
NEW QUESTION 5
Refer to the exhibit.
Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: A
NEW QUESTION 6
Which statement about IPv6 RA Guard is true?
- A. It does not offer protection in environments where IPv6 traffic is tunneled.
- B. It cannot be configured on a switch port interface in the ingress direction.
- C. Packets that are dropped by IPv6 RA Guard cannot be spanned.
- D. It is not supported in hardware when TCAM is programmed.
Answer: A
NEW QUESTION 7
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 8
R2 has a locally originated prefix 192.168.130.0/24 and has these configurations:
What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
- A. R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.
- B. R1 does not accept any routes other than 192.168.130.0/24
- C. R1 does not forward traffic that is destined for 192.168.30.0/24
- D. Network 192.168.130.0/24 is not allowed in the R1 table
Answer: A
NEW QUESTION 9
Drag and drop the packet types from the left onto the correct descriptions on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 10
Refer to the exhibit.
ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to
achieve redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console. Which command is missing from the IP SLA configuration?
- A. Start-time 00:00
- B. Start-time 0
- C. Start-time immediately
- D. Start-time now
Answer: D
NEW QUESTION 11
Which command displays the IP routing table information that is associated with VRF-Lite?
- A. show ip vrf
- B. show ip route vrf
- C. show run vrf
- D. show ip protocols vrf
Answer: B
NEW QUESTION 12
Refer to the exhibit.
What does the imp-null tag represent in the MPLS VPN cloud?
- A. Pop the label
- B. Impose the label
- C. Include the EXP bit
- D. Exclude the EXP bit
Answer: C
NEW QUESTION 13
Refer to the exhibit.
During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?
- A. permit tcp port 443
- B. permit udp port 465
- C. permit tcp port 465
- D. permit tcp port 22
Answer: A
NEW QUESTION 14
Drag and drop the DHCP messages from the left onto the correct uses on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 15
Refer to the exhibit.
Why is the remote NetFlow server failing to receive the NetFlow data?
- A. The flow exporter is configured but is not used.
- B. The flow monitor is applied in the wrong direction.
- C. The flow monitor is applied to the wrong interface.
- D. The destination of the flow exporter is not reachable.
Answer: D
NEW QUESTION 16
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
- A. router ospfv3 1address-family ipv4
- B. Router(config-router)#ospfv3 1 ipv4 area 0
- C. Router(config-if)#ospfv3 1 ipv4 area 0
- D. router ospfv3 1address-family ipv4 unicast
Answer: B
NEW QUESTION 17
Drag and drop the MPLS terms from the left onto the correct definitions on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 18
Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 19
Which command allows traffic to load-balance in an MPLS Layer 3 VPN configuration?
- A. multi-paths eibgp 2
- B. maximum-paths 2
- C. maximum-paths ibgp 2
- D. multi-paths 2
Answer: B
NEW QUESTION 20
Refer to the exhibit.
In which circumstance does the BGP neighbor remain in the idle condition?
- A. if prefixes are not received from the BGP peer
- B. if prefixes reach the maximum limit
- C. if a prefix list is applied on the inbound direction
- D. if prefixes exceed the maximum limit
Answer: D
NEW QUESTION 21
Refer to the exhibit.
An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed. What is the reason for this issue?
- A. By default, only internal routes and external type 1 routes are redistributed into BGP
- B. Only classful networks are redistributed from OSPF to BGP
- C. BGP convergence is slow, so the route will eventually be present in the BGP table
- D. By default, only internal OSPF routes are redistributed into BGP
Answer: A
NEW QUESTION 22
......
Thanks for reading the newest 300-410 exam dumps! We recommend you to try the PREMIUM Certshared 300-410 dumps in VCE and PDF here: https://www.certshared.com/exam/300-410/ (58 Q&As Dumps)