Renew 300-510 Free Draindumps For Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) Certification
Ucertify 300-510 Questions are updated and all 300-510 answers are verified by experts. Once you have completely prepared with our 300-510 exam prep kits you will be ready for the real 300-510 exam without a problem. We have Improved Cisco 300-510 dumps study guide. PASSED 300-510 First attempt! Here What I Did.
Free 300-510 Demo Online For Cisco Certifitcation:
NEW QUESTION 1
Refer to the exhibit. After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers cannot authenticate with one another.
- B. The two routers have the same area ID.
- C. The two routers have the same network ID.
- D. The two routers have different IS-types.
Answer: C
NEW QUESTION 2
Refer to the exhibit. After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- B. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- C. Router 2 uses router 1 as the next hop for 192.168.0.0/24
- D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
Answer: A
NEW QUESTION 3
Which task is performed when troubleshooting LDP?
- A. Execute the ping utility to generate information about the MAC addresses used along the path
- B. Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis
- C. Execute the traceroute utility to generate information about the labels used along the path
- D. Verify that Cisco Express Forwarding has been disabled on the network
Answer: C
NEW QUESTION 4
DRAG DROP
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Select and Place:
- A. Mastered
- B. Not Mastered
Answer: A
NEW QUESTION 5
DRAG DROP
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network. Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)
Select and Place:
- A. Mastered
- B. Not Mastered
Answer: A
NEW QUESTION 6
Refer to the exhibit. A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only the administratively scoped range is permitted
- B. Only ASM is permitted
- C. Only the default SSM range is permitted
- D. Only GLOP is permitted
Answer: C
NEW QUESTION 7
Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?
- A. Configure the summary-only keyword on the aggregate command
- B. Set each specific route in the AGGRO policy to drop instead of suppress-route
- C. Filter the routes on the receiving router
- D. Set each specific route in the AGGRO policy to remove instead of suppress-route
Answer: A
NEW QUESTION 8
Refer to the exhibit. Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 has a list of labels used to explicitly lay out a path to router 2.
- B. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
- C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
- D. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
Answer: C
NEW QUESTION 9
Refer to the exhibit. A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?
- A. A.
B.
C.
- B.
Answer: C
NEW QUESTION 10
Which output from the show isis interface command helps an engineer troubleshoot an IS-IS adjacency problem on a Cisco IOS-XR platform?
- A. metric
- B. priority
- C. circuit type
- D. hello interval
Answer: D
NEW QUESTION 11
Refer to the exhibit. Which LSA type is indicated by this router output?
- A. type 3 LSA
- B. type 4 LSA
- C. type 1 LSA
- D. type 2 LSA
Answer: C
NEW QUESTION 12
Refer to the exhibit. XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?
- A.
- B.
C.
- C.
Answer: D
NEW QUESTION 13
A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances. Which description of the possible cause of issues in the routing domain is true?
- A. The same interface cannot be advertised in two different IS-IS instances
- B. The IS-IS “ISP” and “ISP2” instances are unrelated and unable to intercommunicate
- C. The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship
- D. The interface mode ip router is-is command was not included in the script
Answer: A
NEW QUESTION 14
Refer to the exhibit. CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?
- A.
B.
Answer: B
NEW QUESTION 15
Refer to the exhibit. An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. R4 prefer to reach R5 using R1 as the next hop
- B. All links have equal cost if the default metric is used
- C. R5 prefers to use R4 as the next hop for all routes
- D. R1 prefer to use R5 as the next hop to reach R4
Answer: B
NEW QUESTION 16
After you change the IP address on an IOS XR router, you cannot ping the new address.
Which step did you forget to complete?
- A. commit the configuration
- B. roll back the configuration
- C. merge the configuration
- D. save the running configuration
Answer: A
NEW QUESTION 17
Refer to the exhibit. A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION 18
DRAG DROP
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.
Select and Place:
- A. Mastered
- B. Not Mastered
Answer: A
NEW QUESTION 19
Which two conditions must be met before separate ISPs can provide interdomain multicast routing? (Choose two.)
- A. Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.
- B. Each ISP must dedicate a single router to handle multicast traffic between providers.
- C. Each ISP must replace its RP assignment with a global RP.
- D. Each ISP must configure its network to use PIM-DM.
- E. Each ISP must support intradomain multicast routing.
Answer: AE
NEW QUESTION 20
Refer to the exhibit. Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. MED
- B. local preference
- C. origin
- D. weight
Answer: A
NEW QUESTION 21
Refer to the exhibit. Which effect of this configuration is true?
- A. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- B. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- C. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
Answer: A
NEW QUESTION 22
......
Recommend!! Get the Full 300-510 dumps in VCE and PDF From Dumps-hub.com, Welcome to Download: https://www.dumps-hub.com/300-510-dumps.html (New 60 Q&As Version)