Free Cisco 350-601 Study Guides Online
Our pass rate is high to 98.9% and the similarity percentage between our 350-601 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 350-601 exam in just one try? I am currently studying for the Cisco 350-601 exam. Latest Cisco 350-601 Test exam practice questions and answers, Try Cisco 350-601 Brain Dumps First.
Cisco 350-601 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
A network architect is asked to design and manage geographically distributed data centers across cities and decides to use a Multi-Site Orchestrator deployment. How many orchestrators should be deployed?
- A. 3
- B. 5
- C. 4
- D. 2
Answer: A
Explanation:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centricinfrastructure/w
NEW QUESTION 2
Refer to the exhibit.
The gateway of Server 1 is in the VLAN 100 SVI on N5K-1 and the gateway of Server 2 is in the VLAN 200 SVI on N5K-2 Server 1 must connect to Server 2 using unidirectional traffic. Which action accomplishes this requirement?
- A. Add VLAN 100 and 200 to the allowed VLANs list on the Ethernet 1/1 interface on NK5-1.
- B. Assign VRF WEB membership to interfaces VLAN 150 and 200 on N5K-2.
- C. Configure access VLAN 100 on interface Ethernet 1/2 on N5K-2.
- D. Create a static route in VRF WEB for the subnet of Server 2 on N5K-1
Answer: B
NEW QUESTION 3
Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.)
- A. syslog redirection
- B. DNS servers
- C. SMTP servers
- D. NTP servers
- E. SMTP reply-to-address
Answer: BD
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_gui_cisco_intergight_management.html
NEW QUESTION 4
An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal?
- A. Enable the system to boot with the configured boot order.
- B. Set the boot configuration directly through BIOS.
- C. Configure the legacy and precision boot order to be mutually exclusive.
- D. Apply UEFI Secure Boot for a nonsupported operating system.
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/gui/config/guide/1.5/b_Cisco_UCS_C-series_G
NEW QUESTION 5
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets these requirements?
- A. SaltStack
- B. Terraform
- C. Puppet
- D. Kubemetes
Answer: C
Explanation:
"Overview of Puppet architecture: [...] After it receives a catalog, the Puppet agent applies the catalog by checking each resource that the catalog describes. If it finds any resources that are not in their desired state, it makes any changes necessary to correct them."
https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rackservers/ whitepaper_c11-740103.pdf
https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-devops-integration-sol-br
from DCCOR book under Puppet section The operation of the Puppet agent involves periodically connecting to the Puppet master, which in turn compiles and sends a configuration manifest to the agent. The agent reconciles this manifest with the current state of the node and updates state that is based on differences.
NEW QUESTION 6
An engineer is automating a Cisco Nexus 9000 Series Switch using the NX-OS API. Which code snippet creates a local user called "tacuser" with an expiration date of 22 November?
A)
B)
C)
- A. Option A
- B. Option B
- C. Option C
Answer: A
NEW QUESTION 7
An engineer must implement access control tor Cisco UCS Manager. The configuration must meet these requirements.
All users and user groups must be configured using Active Directory.
User1 must have full access to the storage operations configuration.
Which action must be performed on Cisco UCS to meet the requirements?
- A. Create a custom rote tot the user and RADIUS for the role-mapping for Active Directory.
- B. Execute a built-in role for the user and LDAP lor the role-mapping for Active Directory.
- C. Create a custom role tor the user and LDAP for the rote-mappings for Active Directory.
- D. Execute a built-in role for the user and RADIUS for the role-mapping for Active Directory.
Answer: B
NEW QUESTION 8
Refer to the exhibit.
An administrator must complete the unified fabric configuration between Server1 and a pair of Cisco Nexus 9000 Series Switches Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the N9K-1 configuration Snippets are used more than once.
Solution:
Po12
Vlan Vfc1 Po12
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 9
A network administrator is using the Cisco ESA with Cisco AMP to upload files to the cloud for analysis. The network is congested and is affecting communication. How will the Cisco ESA handle any files which need analysis?
- A. Cisco AMP calculates the SHA-256 fingerprint, caches it, and periodically attempts the upload.
- B. The Cisco ESA immediately makes another attempt to upload the file.
- C. The file is queued for upload when connectivity is restored.
- D. The file upload is abandoned.
Answer: A
NEW QUESTION 10
Refer to the exhibit.
What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?
- A. displays the compatibility of the EPLD upgrade and the image in the bootflash
- B. shows a simulated upgrade of the EPLD
- C. upgrades the EPLD on the switch disruptively
- D. displays the impact of the upgrade on the operation of the switch
Answer: D
Explanation:
You can use the show install impact epld bootflash: command to determine whether the EPLDs can be
upgraded for all the modules or for specific modules on a switch. This command indicates the current EPLD images, new EPLD images, and whether the upgrades would be disruptive to switch operations. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/epld/n9k-epld-rn-61.html
NEW QUESTION 11
An engineer must perform a POAP deployment of a Cisco Nexus 9000 Series Switch The switch must automatically receive its software image and configuration file upon power-on. Also, only UDP is permitted between the Nexus 9000 switch and the server that hosts the Cisco NX-OS system images Which set of actions completes the configuration’
- A. Enable option 67. Define TFTP transfer protocol
- B. Enable option 43 Define HTTP transfer protocol.
- C. Enable option 46. Define TFTP transfer protocol
- D. Enable option 35. Define HTTP transfer protocol.
Answer: A
NEW QUESTION 12
Which two actions should be performed before upgrading the infrastructure and firmware of multiple UCS blades? (Choose two)
- A. Verify if the bootflash on the fabric interconnects m the Cisco UCS has at least 15°* available space
- B. Enable Smart Call Home feature during the firmware upgrade process
- C. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space
- D. Run the Check Conformance feature to verify that all your components are running the compatiblefirmware version after the upgrade
- E. Get Full State and All Configuration backup files before beginning the upgrade
Answer: DE
NEW QUESTION 13
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?
- A. EPLD updates are installed only via the Cisco DCNM GUI
- B. EPLD packages update hardware functionality on a device
- C. EPLD bundles are released separately from a Cisco MDS NX-OS release
- D. EPLD updates are nondisruptive to traffic flow
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.htm
NEW QUESTION 14
An engineer must configure an LACP port channel on two Cisco Nexus 7000 Series Switches. The interface e1/2 must be a hot-standby link that initiates negotiation with other ports Drag and drop the commands from the right onto the blanks in the configuration on the left Not all commands are used
Solution:

Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 15
What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two)
- A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches.
- B. The hypervisors must be installed to Cisco FlexFlash SD cards.
- C. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches.
- D. The cluster deployment type must support a mix of HDD and SSD.
- E. The servers must be discovered, unassociated, and connected to each fabric interconnect.
Answer: CE
Explanation:
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ AdminGuide/3_5/
b_HyperFlexSystems_AdministrationGuide_3_5/b_HyperFlexSystems_AdministrationGuide_3_5_chapter_011
NEW QUESTION 16
Which mroute state is created when Bidirectional PIM is deployed at a site?
- A. MVPN Type-6
- B. *,G
- C. MVPN Type-7
- D. S,G
Answer: B
Explanation:
Bidirectional PIM has been invented for networks where we have many sources and receivers talking to each other. PIM Sparse mode RP builds 2 entries *, G and S, G but when we use PIM bidirectional mode, the RP will never build a S,G entry and, it only allow the *,G entry.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pim-xe-16-5-book/im and https://networklessons.com/multicast/multicast-bidirectional-pim
NEW QUESTION 17
Which component is excluded by default from the host firmware package?
- A. network interface controller
- B. board controller
- C. storage controller
- D. local disk
Answer: D
NEW QUESTION 18
Refer to the exhibit.
A network engineer must create an EEM script that saves a copy of the running configuration to bootftash and writes a message to syslog when a user saves the configuration to a Cisco Nexus 9000 Series Switch. Which command completes the configuration set?
- A. running-config
- B. policy-default
- C. syslog-config
- D. event-default
Answer: A
NEW QUESTION 19
Refer to the exhibit.
A network engineer plans to upgrade the current software images of a Cisco Nexus switch. What is the impact of starting the EPLD upgrade?
- A. The switch reboots one time for the new EPLD versions to take effect.
- B. The switch reboots multiple times for the new EPLD versions to take effect.
- C. The switch skips the EPLD upgrade for each EPLD device of the switch.
- D. The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/92x/epld-rn/nxos_n9K_epldRN_924.
NEW QUESTION 20
......
Recommend!! Get the Full 350-601 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/350-601-dumps.html (New 489 Q&As Version)