The Up To The Immediate Present Guide To 350-601 Free Practice Test

NEW QUESTION 1
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action must be taken?

• A. NPIV must be enabled on the upstream switch.
• B. The FCNS database must be disabled in the fabric.
• C. A port channel must be configured to the upstream switch.
• D. All switches in the fabric must be Cisco MDS switches.

Answer: A

NEW QUESTION 2
A POAP-enabled Cisco Nexus switch will not enter POAP mode.
Which two conditions should be verified? (Choose two.)

• A. No startup configuration is available.
• B. The switch is in bootup process.
• C. The license file is missing on the switch.
• D. Bootflash must contain a special directory named POAP with poap.py file.
• E. No Cisco NX-OS image is present on the bootflash.

Answer: AB

NEW QUESTION 3
Which virtual MAC address is the default for HSRP version 2 group 10?

• A. 0000.5E00.0110
• B. 0000.0C9F.F00A
• C. 3716.1350.1C0A
• D. 0000.0C9F.F010

Answer: B

NEW QUESTION 4
Refer to the exhibit.

What must be connected to clear the HA NOT READY status?

• A. Layer 1-Layer 2 ports
• B. server chassis
• C. management ports
• D. network uplinks

Answer: B

NEW QUESTION 5
An engineer must configure RBAC in Cisco UCS Manager in an existing data center environment.
Which two roles can be used to configure LAN connectivity policies? (Choose two.)

• A. server-profile
• B. network-admin
• C. operations
• D. enable
• E. admin

Answer: BE

NEW QUESTION 6
Refer to the exhibit.

What is the result of implementing this configuration?

• A. The switch queries the TACACS+ server by using an encrypted text PAP login.
• B. The TACACS+ server uses the type-6 encrypted format.
• C. The switch queries the TACACS+ server by using a clear text PAP login.
• D. The timeout value on the TACACS+ server is 10 seconds.

Answer: D

NEW QUESTION 7
What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)

• A. It validates that devices comply with network security policies.
• B. It predicts the impact of changes to the network.
• C. It predicts the network load on a data center.
• D. It ensures that network performance meets an SLA.
• E. It verifies the speed of network packet flows by using telemetry.

Answer: AB

NEW QUESTION 8
DRAG DROP
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 9
Refer to the exhibit.

Which backup operation type does not include the Preserve Identities feature?

• A. full state
• B. all configuration
• C. logical configuration
• D. system configuration

Answer: C

NEW QUESTION 10
DRAG DROP
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.
Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 11
Which statement about the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation is true?

• A. The FCoE Initialization Protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fabric-provided MAC address.
• B. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.
• C. FCoE does not use a MAC addres
• D. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.
• E. The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a 24-bit Fibre Channel ID to derive a full 48- bit FCoE MAC address.

Answer: AB

NEW QUESTION 12
DRAG DROP
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the left into the correct order on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 13
An engineer is duplicating an existing Cisco UCS setup at a new site.
What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)

• A. contains the configured organizations and locales
• B. contains the VLAN and VSAN configurations
• C. contains the AAA and RBAC configurations
• D. contains all of the configurations
• E. contains a file with an extension tgz that stores all of the configurations

Answer: BC

NEW QUESTION 14
Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 Series Switch are true? (Choose two.)

• A. The upgrade can be performed from the standby supervisor module.
• B. The upgrade process disrupts only the module that is being upgraded.
• C. The active supervisor can be upgraded.
• D. If an upgrade is interrupted, the upgrade continues after a connection is restored.
• E. Modules must be online to be upgraded.

Answer: AB

NEW QUESTION 15
An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model.
Which technology should be used to accomplish this goal?

• A. NETCONF
• B. NX Yang
• C. NX-API REST
• D. JSON-RPC

Answer: C

NEW QUESTION 16
Refer to the exhibit.

Why does the Python code for Cisco NX-API print an error message?

• A. The JSON is not a supported format for the NX-API.
• B. The "type" is wrong in the header of the request and should be "cli_conf"
• C. NX-API does not allow configuration for features via the requests module.
• D. The "type" is wrong in the body of the request and should be "cli_conf"

Answer: C

NEW QUESTION 17
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.
Which configuration is expected to be saved by using this backup type?

• A. systems
• B. roles
• C. servers
• D. service profiles

Answer: D

NEW QUESTION 18
Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.)

• A. POAP feature license
• B. DHCP server to bootstrap IP information
• C. image noted in the script file against switch bootflash
• D. script signed with security key
• E. TFTP server that contains the configuration script

Answer: BE

NEW QUESTION 19
A Cisco MDS 9000 Series Storage Switch has reloaded unexpectedly.
Where does the engineer look for the latest core dump file?

• A. /mnt/recovery
• B. /mnt/core
• C. /mnt/logs
• D. /mnt/pss

Answer: D

NEW QUESTION 20
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to configure the SAN boot?

• A. Define the vHBAs as bootable and leave the boot target definition empty.
• B. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
• C. Define the vHBAs as bootable and leave the default values on the boot target definition.
• D. Create a SAN boot policy in which every initiator is mapped to the same target LUN.

Answer: D

NEW QUESTION 21
An engineer is implementing an import operation in Cisco UCS Manager.
What is the impact of performing this operation?

• A. Information can be modified on the management plane only.
• B. A configuration can be imported from a higher release to a lower release.
• C. An import operation can be scheduled.
• D. Only a configuration file that was exported from the same Cisco UCS Manager can be imported.

Answer: A

NEW QUESTION 22
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual- site adjacency?

• A.
• B.
• C.
• D.

Answer: B

NEW QUESTION 23
DRAG DROP
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 24
......