How Many Questions Of 300-710 Brain Dumps

NEW QUESTION 1
When do you need the file-size command option during troubleshooting with packet capture?

• A. when capture packets are less than 16 MB
• B. when capture packets are restricted from the secondary memory
• C. when capture packets exceed 10 GB
• D. when capture packets exceed 32 MB

Answer: D

NEW QUESTION 2
DRAG DROP
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

NEW QUESTION 3
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)

• A. OSPFv2 with IPv6 capabilities
• B. virtual links
• C. SHA authentication to OSPF packets
• D. area boundary router type 1 LSA filtering
• E. MD5 authentication to OSPF packets

Answer: BD

NEW QUESTION 4
Which command must be run to generate troubleshooting files on an FTD?

• A. system support view-files
• B. sudo sf_troubleshoot.pl
• C. system generate-troubleshoot all
• D. show tech-support

Answer: B

NEW QUESTION 5
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)

• A. BGPv6
• B. ECMP with up to three equal cost paths across multiple interfaces
• C. ECMP with up to three equal cost paths across a single interface
• D. BGPv4 in transparent firewall mode
• E. BGPv4 with nonstop forwarding

Answer: AC

NEW QUESTION 6
Which command-line mode is supported from the Cisco Firepower Management Center CLI?

• A. privileged
• B. user
• C. configuration
• D. admin

Answer: C

NEW QUESTION 7
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)

• A. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
• B. The system performs intrusion inspection followed by file inspection.
• C. They can block traffic based on Security Intelligence data.
• D. File policies use an associated variable set to perform intrusion prevention.
• E. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.

Answer: AC

NEW QUESTION 8
Which connector is used to integrate Cisco ISE with Cisco FMC for Rapid Threat Containment?

• A. pxGrid
• B. FTD RTC
• C. FMC RTC
• D. ISEGrid

Answer: A

NEW QUESTION 9
Which two deployment types support high availability? (Choose two.)

• A. transparent
• B. routed
• C. clustered
• D. intra-chassis multi-instance
• E. virtual appliance in public cloud

Answer: AB

NEW QUESTION 10
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high-availability?

• A. configure high-availability resume
• B. configure high-availability disable
• C. system support network-options
• D. configure high-availability suspend

Answer: B

NEW QUESTION 11
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?

• A. configure manager local 10.0.0.10 Cisco123
• B. configure manager add Cisco123 10.0.0.10
• C. configure manager local Cisco123 10.0.0.10
• D. configure manager add 10.0.0.10 Cisco123

Answer: D

NEW QUESTION 12
What is the disadvantage of setting up a site-to-site VPN in a clustered-units environment?

• A. VPN connections can be re-established only if the failed master unit recovers.
• B. Smart License is required to maintain VPN connections simultaneously across all cluster units.
• C. VPN connections must be re-established when a new master unit is elected.
• D. Only established VPN connections are maintained when a new master unit is elected.

Answer: C

NEW QUESTION 13
What are the minimum requirements to deploy a managed device inline?

• A. inline interfaces, security zones, MTU, and mode
• B. passive interface, MTU, and mode
• C. inline interfaces, MTU, and mode
• D. passive interface, security zone, MTU, and mode

Answer: C

NEW QUESTION 14
What are two application layer preprocessors? (Choose two.)

• A. CIFS
• B. IMAP
• C. SSL
• D. DNP3
• E. ICMP

Answer: BC

NEW QUESTION 15
What is the benefit of selecting the trace option for packet capture?

• A. The option indicates whether the packet was dropped or successful.
• B. The option indicated whether the destination host responds through a different path.
• C. The option limits the number of packets that are captured.
• D. The option captures details of each packet.

Answer: C

NEW QUESTION 16
Which two actions can be used in an access control policy rule? (Choose two.)

• A. Block with Reset
• B. Monitor
• C. Analyze
• D. Discover
• E. Block ALL

Answer: AB

NEW QUESTION 17
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?

• A. system generate-troubleshoot
• B. show configuration session
• C. show managers
• D. show running-config | include manager

Answer: C

NEW QUESTION 18
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)

• A. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re-apply the policies after registration is completed.
• B. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
• C. No option to delete and re-add a device is available in the Cisco FMC web interface.
• D. The Cisco FMC web interface prompts users to re-apply access control policies.
• E. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.

Answer: DE

NEW QUESTION 19
What is the maximum bit size that Cisco FMC supports for HTTPS certificates?

• A. 1024
• B. 8192
• C. 4096
• D. 2048

Answer: D

NEW QUESTION 20
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?

• A. FlexConfig
• B. BDI
• C. SGT
• D. IRB

Answer: D

NEW QUESTION 21
......