Top Tips Of Up To The Minute 3V0-42.20 Free Practice Exam

Master the 3V0-42.20 Advanced Design VMware NSX-T Data Center content and be ready for exam day success quickly with this Actualtests 3V0-42.20 braindumps. We guarantee it!We make it a reality and give you real 3V0-42.20 questions in our VMware 3V0-42.20 braindumps.Latest 100% VALID VMware 3V0-42.20 Exam Questions Dumps at below page. You can use our VMware 3V0-42.20 braindumps and pass your exam.

Free demo questions for VMware 3V0-42.20 Exam Dumps Below:

NEW QUESTION 1
Refer to the exhibits.
Design Option1:
3V0-42.20 dumps exhibit
Design Option 2:
3V0-42.20 dumps exhibit
Design Option 3:
3V0-42.20 dumps exhibit
Design Option 4:
3V0-42.20 dumps exhibit
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. The conceptual design includes these requirements, assumptions, constraints, and risks:
3V0-42.20 dumps exhibit Critical applications must run across sites without changing IP address.
3V0-42.20 dumps exhibitRTO/RPO must be reduced for recovery of applications on secondary site.
3V0-42.20 dumps exhibit IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)

  • A. Design Option 4
  • B. Design Option 2
  • C. Design Option 1
  • D. Design Option 3

Answer: C

NEW QUESTION 2
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
3V0-42.20 dumps exhibit Existing hardware will be used in any design proposal.
3V0-42.20 dumps exhibit Network bandwidth cannot be expanded.
Which concept of the Discover Task do these items belong to? (Choose the best answer.)

  • A. constraint
  • B. requirement
  • C. risk
  • D. assumption

Answer: A

NEW QUESTION 3
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit There is a critical application used by the Finance Team.
3V0-42.20 dumps exhibit The critical application has an availability and recoverability SLA of 99.999%.
3V0-42.20 dumps exhibit The critical application is sensitive to network changes.
Which two selections should an architect include in their design? (Choose two.)

  • A. Configure Tier-0 gateway for eBGP and ECMP.
  • B. Configure Tier-1 gateway for eBGP and ECMP.
  • C. Enable BFD on Tier-0 gateway.
  • D. Install and configure hosts with 100Gbps physical NICs.
  • E. Configure multiple static routes on Tier-1 gateway.

Answer: BD

NEW QUESTION 4
Which type of design includes vendor models, host names, IP Addresses, port connections, logical unit number sizes, and number of CPUs? (Choose the best answer.)

  • A. Physical Design
  • B. Conceptual Design
  • C. High-Level Design
  • D. Logical Design

Answer: A

NEW QUESTION 5
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Data between two networks connected over a public network needs to be encrypted.
3V0-42.20 dumps exhibit Certificate authentication is required.
3V0-42.20 dumps exhibit Dynamic route learning is preferred.
Which selection should the architect include in their design? (Choose the best answer.)

  • A. Deploy a Tier-0 gateway in Active/Standby mod
  • B. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.
  • C. Deploy a Tier-0 gateway in Active/Active mod
  • D. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
  • E. Deploy a Tier-0 gateway in Active/Standby mod
  • F. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
  • G. Deploy a Tier-0 gateway in Active/Active mod
  • H. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.

Answer: C

NEW QUESTION 6
Which two resources can be used by an NSX architect during the Assessment Phase? (Choose two.)

  • A. vRealize Network Insight
  • B. VMware Validated Design
  • C. VMware customer references
  • D. key stakeholder interviews
  • E. application licensing

Answer: AE

NEW QUESTION 7
Which selection is associated with the Review Task of the Engagement Lifecycle? (Choose the best answer.)

  • A. Gather and document requirements, assumptions, and constraints.
  • B. Build, deploy, implement, and test the design.
  • C. Measure performance against customer??s objective.
  • D. Create and document the logical and physical design.

Answer: C

NEW QUESTION 8
A customer wants to place their NSX Managers in different subnets.
Which would an architect recommend to support the request? (Choose the best answer.)

  • A. Use a load balancer.
  • B. Use round-robin DNS.
  • C. Use NAT.
  • D. Use a cluster Virtual IP.

Answer: D

NEW QUESTION 9
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Customer is concerned with NSX Manager availability.
3V0-42.20 dumps exhibit 3 cabinets/racks are available in the data center.
3V0-42.20 dumps exhibit No integration with 3rd party solution is required.
3V0-42.20 dumps exhibit There is no budget for physical equipment acquisition.
3V0-42.20 dumps exhibit The 3 cabinets/racks do not share the same L2 domain.
Which three selections should the architect include in their design to address the customer??s concern with NSX Manager availability? (Choose three.)

  • A. Deploy 2 cold standby NSX Manager appliances in rack 2/3.
  • B. Use separate IP per NSX Manager appliance per rack.
  • C. Use another NSX Manager IP in case an appliance fails.
  • D. Deploy a single active NSX Manager appliance in rack 1.
  • E. Deploy an NSX Manager Appliance per rack and cluster them.
  • F. Use a physical/internal load-balancer with the cluster.

Answer: ADE

NEW QUESTION 10
An architect is helping an organization with the Logical Design of a Layer 2 bridging solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Workloads are running on ESXi hosts.
3V0-42.20 dumps exhibit Workloads are running on KVM hosts.
3V0-42.20 dumps exhibit Workloads on hypervisors should use bridging services.
3V0-42.20 dumps exhibit VLAN 50 is used for Tier-0 uplink connectivity.
Which selection should the architect include in their design? (Choose the best answer.)

  • A. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 60.
  • B. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 50.
  • C. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 50.
  • D. Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 60.

Answer: B

NEW QUESTION 11
Which two protocols are typically used for multicast in a NSX-T Data Center environment? (Choose two.)

  • A. PIM Full Form
  • B. PIM Dense Mode
  • C. IGMPv2
  • D. PIM Sparse mode
  • E. IGMPv3

Answer: CD

NEW QUESTION 12
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Current hypervisor of choice is KVM.
3V0-42.20 dumps exhibit Cost reduction is important.
Which two selections should the architect recommend to the organization? (Choose two.)

  • A. Deploy Edge VM Nodes using ISO.
  • B. Deploy NSX Manager using OVF.
  • C. Deploy NSX Manager using QCOW2.
  • D. Deploy bare metal Edge Nodes.
  • E. Deploy Edge VM Nodes on KVM.

Answer: CD

NEW QUESTION 13
Refer to the exhibit.
3V0-42.20 dumps exhibit
A financial company is adopting micro-services with the intent of simplifying network security. An NSX-T architect is proposing a NSX-T Data Center micro-segmentation logical design. The architect has created a diagram to share with the customer.
How many security levels will be implemented according to this Logical Design? (Choose the best answer.)

  • A. 5 levels
  • B. 3 levels
  • C. 9 levels
  • D. 4 levels

Answer: A

NEW QUESTION 14
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. Which risk is documented by an architect? (Choose the best answer.)

  • A. The security team has a firewall communication matrix documented.
  • B. The team is not trained for NSX-T but have a very strong experience with vSphere.
  • C. Open communication between different application tiers is not allowed.
  • D. Aggregate N-S throughput at any given time should be at least 10G.

Answer: B

NEW QUESTION 15
An architect is designing a solution for containerization. The solution will include high availability and security using NSX-T Data Center. The architect plans to provide a basic required components list in the Logical Design.
Which solution should the architect recommend? (Choose the best answer.)

  • A. 3 NSX Managers, 3 virtual NSX Edges, two Tier-0 gateways in Active/Standby, BGP configuration
  • B. 2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route
  • C. 3 NSX Managers, 3 virtual NSX Edges, one Tier-0 gateway and a static route and OSPF
  • D. 1 NSX Manager, 2 virtual NSX Edges, two Tier-0 gateways in Active/Active, BGP configuration

Answer: A

NEW QUESTION 16
Which selection must be taken into consideration when creating a Logical Design for a planned migration? (Choose the best answer.)

  • A. An N-VDS can only attach to a single Overlay transport zone.
  • B. An N-VDS can only attach to a single VLAN transport zone.
  • C. An N-VDS can attach to both an Overlay and a VLAN transport zone to a N-VDS having different name/s.
  • D. An N-VDS must be disabled before attaching both Overlay and VLAN transport zones.

Answer: B

NEW QUESTION 17
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Migrating existing data center to KVM hosts.
3V0-42.20 dumps exhibit Redundancy and high availability are required.
3V0-42.20 dumps exhibit No component can be a single point of failure.
Which selection should the architect recommend? (Choose the best answer.)

  • A. Linux Bridge redundancy with Active/Active Mode and multiple pNICs with necessary binding
  • B. Linux Bridge redundancy with Active/Active Mode and single pNIC with static binding
  • C. vSS/vDS in Active/Standby Mode with necessary binding
  • D. vSS/vDS in Active/Active Mode with necessary pNICS and required binding modes

Answer: C

NEW QUESTION 18
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
3V0-42.20 dumps exhibit There are applications which use IPv6 addressing.
3V0-42.20 dumps exhibit Network administrators are not familiar with NSX-T Data Center solutions.
3V0-42.20 dumps exhibit Hosts can only be configured with two physical NICs.
3V0-42.20 dumps exhibit There is an existing management cluster to deploy the NSX-T components.
3V0-42.20 dumps exhibit Dynamic routing should be configured between the physical and virtual network.
3V0-42.20 dumps exhibit There is a storage array available to deploy NSX-T components.
Which risk was documented by the architect? (Choose the best answer.)

  • A. Network administrators are not familiar with NSX-T Data Center solutions.
  • B. Dynamic routing should be configured between the physical and virtual network.
  • C. There are applications which use IPv6 addressing.
  • D. There is a storage array available to deploy NSX-T components.

Answer: B

NEW QUESTION 19
Which two VMware recommendations should an architect follow when configuring top of rack (ToR) switches in an NSX-T Data Center environment? (Choose two.)

  • A. Use only IPv4 addressing in all deployments.
  • B. Configure redundant physical switches to enhance availability.
  • C. Configure switch ports that connect to ESXi host manually as trunk ports.
  • D. Configure switch ports with a Dynamic Trunking Protocol.
  • E. Modify the Spanning Tree Protocol to increase the time to transition to the forwarding state.

Answer: DE

NEW QUESTION 20
Which three IPv6 features are supported in an NSX-T Data Center design? (Choose three.)

  • A. IPv6 OSPF
  • B. IPv6 static routing
  • C. IPv6 switch security
  • D. IPv6 DNS
  • E. IPv6 Distributed Firewall
  • F. IPv6 VXLAN

Answer: BCE

NEW QUESTION 21
What selection is the key design benefit provided by a dedicated Edge Cluster VM or Bare Metal? (Choose the best answer.)

  • A. reduced administrative overhead
  • B. predictable network performance
  • C. multiple Tier-0 gateways per Edge Node Cluster
  • D. support for Edge Node Clusters with more than 10 Edge Nodes

Answer: B

NEW QUESTION 22
......

P.S. Easily pass 3V0-42.20 Exam with 57 Q&As Allfreedumps.com Dumps & pdf Version, Welcome to Download the Newest Allfreedumps.com 3V0-42.20 Dumps: https://www.allfreedumps.com/3V0-42.20-dumps.html (57 New Questions)