Abreast Of The Times 70-341 Tutorials 2021

NEW QUESTION 1

Your company has a main office and three branch offices.
You have an Exchange Server 2013 organization. The main office contains five Exchange servers. Each branch office contains two Exchange servers. All of the servers have all of the Exchange server roles installed. Each branch office contains one database availability group (DAG).
You need to recommend a load balancing solution for the branch offices. The solution must ensure that both servers in each office are the targets of all client connections.
What are two possible recommendations? Each correct answer presents a complete solution.

• A. DNS round robin
• B. Layer 4 hardware load balancers
• C. CAS arrays
• D. Network Load Balancing (NLB) clusters

Answer: BC

NEW QUESTION 2

You are planning to implement several servers on virtual machines. The servers have Exchange Server 2013 installed.
The planned implementation must meet the following requirements:
Minimize the amount of overhead required for the virtualization solution.
Minimize the risk of data corruption for the Exchange Server databases.
You need to recommend a storage solution for the Exchange databases and a backup and recovery solution for the planned servers.
Which solutions should you recommend?
To answer, select the appropriate solutions in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 3

You have an Exchange Server 2013 organization that contains two Mailbox servers and two Client Access servers.
You have a database availability group (DAG) that contains both Mailbox servers. You need to deploy public folders.
What should you do first?

• A. Run the New-PublicFolderDatabase cmdlet and specify the -Server parameter.
• B. Run the New-PublicFolder cmdlet and specify the -Path parameter.
• C. Run the New-Mailbox cmdlet and specify the -Publicfolder parameter.
• D. Run the New-MailboxDatabase cmdlet and specify the -PublicFotderDatabase parameter.

Answer: C

NEW QUESTION 4

You have an Exchange Server 2013 organization.
You create two distribution groups named Group1 and Group2. Group1 and Group2 each contain several hundred users. Group1 contains a user named User1.
You need to configure moderation for Group2. The solution must meet the following requirements: Email sent from the members of Group1 must NOT be moderated unless the sender is User1.
All other email must be moderated by a user named Admin1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

• A. Create a transport rule that has a condition of The recipient is Group2. Configure the transport rule to have an action of Forward the message for approval to Admin1.
• B. Run Set-DistributionGroup Group2 -ModeratedBy Admin1-BypassModerationFromSendersOrMembers Group1 -ModerationEnabled $true.
• C. Create a transport rule that has the conditions of The sender is User1 and The recipient is Group2.Configure the transport rule to have an action of Forward the message for approval to Admin1.
• D. Create a transport rule that has the conditions of The sender is User1 and The recipient is Group2.Configure the transport rule to have an action of Forward the message for approval to Admin1.

Answer: BC

NEW QUESTION 5

You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2.
EX1 and EX2 are the members of a database availability group (DAG) named DAG1. DAG1 contains a database named DB1. DB1 is active on EX1.
You deploy a new Exchange Server 2013 server named Ex3. You add EX3 as a member of DAG1.
You need to add a copy of DB1 to EX3 by using an offline copy of the database.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 6

Your company, Fabrikam Inc., has an Exchange Server 2013 organization. The organization that contains three servers named Server1, Server2, and Server3. Server1 and Server2 are members of a database availability group (DAG) named DAG1.
DAG1 contains two mailbox databases. All databases are active on Server1 and replicate to Server2.
You start an unplanned maintenance on Server1 and shut down Server1. You discover that the databases do not mount on Server2. You restart Server1 and the databases mount automatically on Server1.
You need to identify what prevents the databases from switching over successfully to Server2. Which cmdlet should you run?

• A. Test-ReplicationHealth
• B. Test-OutlookConnectivity
• C. Test-ServiceHealth
• D. Get-AvailabilityReportOutage

Answer: A

NEW QUESTION 7

Your network contains an Active Directory forest. The forest contains two sites named Montreal and New York.
You have an Exchange Server 2013 organization that contains a Mailbox server and a Client Access server in each site.
The users in the New York site report that the offline address book (OAB) is not updated after an extended WAN outage between the sites.
The Montreal site contains the OAB generation server.
You need to ensure that the New York site users download the OAB from a server in the New York site. Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.)

• A. Set-Mailbox
• B. New-OfflineAddressBook
• C. New-Mailbox
• D. New-OabVirtualDirectory
• E. Set-OfflineAddressBook

Answer: AC

NEW QUESTION 8
HOTSPOT
You discover that one of the Client Access servers in the New York office does not trust the standalone CA.
You need to ensure that all of the users who have Windows Phone devices can connect successfully to their mailbox.
In which node should you install the root CA certificate?
To answer, select the appropriate node in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 9

You have an Exchange Server 2013 organization.
You need to ensure that an administrator named Admin1 receives a daily email message that contains a log of all the Exchange Server administrative actions.
Which cmdlet should you use in a scheduled task?

• A. Set-AdminAuditLogConfig
• B. Write-AdminAuditLog
• C. New-AdminAuditLogSearch
• D. Search-AdminAuditLog

Answer: C

NEW QUESTION 10

You have an Exchange Server 2013 organization that is configured to filter email messages for spam and malware.
You need to modify the schedule for applying updates to the anti-spam and the antimalware definitions. Which command should you run?

• A. Update-MalwareFilteringServer.ps1
• B. Set-MalwareFilteringServer
• C. Set-SenderFilterConfig
• D. Update-SafeList

Answer: B

NEW QUESTION 11

You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.

You need to create a new database availability group (DAG) that contains EX1 and EX2. Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: Add the Exchange Trusted Subsystem universal security group to the local Administrators group on Server1.
Box 2: Create a new DAG and specify Server1 as the file share witness. Box 3: Add EX1 and EX2 to the DAG.

NEW QUESTION 12

You have an Exchange Server 2013 organization that contains 20 servers.
You plan to deploy Exchange Server 2013 RTM Cumulative Update 1 (CU1) to the first Exchange server in the organization.
You need to ensure that a user named ExchangeAdmin can deploy CU1 to the first server, The solution must minimize the number of permissions assigned to ExchangeAdmin.
To which groups should you add ExchangeAdmin?

• A. Schema Admins, Domain Admins, and Enterprise Admins
• B. Schema Admins, Domain Admins, and Delegated Setup
• C. Domain Admins and Organization Management
• D. Enterprise Admins and Organization Management

Answer: A

NEW QUESTION 13

You have an Exchange Server 2013 organization that contains three servers. The servers are configured as shown in the following table.

All of the servers are part of a database availability group (DAG) named DAG1. The databases are configured as shown in the following table.

All of the databases replicate between all the members of DAG1. You plan to move all mailboxes from DB1 to DB2.
You need to ensure that the passive copies of DB1 are in a healthy state before you move the mailboxes.
Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 14

You create a mailbox named ConfRoom1 as shown in the exhibit. (Click the Exhibit button.)

Users report that when they schedule meetings and attempt to locate ConfRoom1 in the All Rooms address list, they do not see ConfRoom1 on the list.
You need to ensure that the users can locate ConfRoom1 on the All Rooms address list. What should you do?

• A. Modify the Sharing Policy that is associated to ConfRoom1.
• B. Run the Update-AddressList command and specify the -Identity parameter.
• C. Run the Set-Mailbox command and specify the -IsRootPublicFolderMailbox parameter.
• D. Delete the ConfRoom1 mailbox, and create a new resource mailbox.

Answer: D

NEW QUESTION 15

You need to recommend a design that meets the technical requirements for communication between Fabrikam and A. Datum.
Which three actions should you perform in fabrikam.com? (Each correct answer presents part of the solution. Choose three.)

• A. Create a remote domain for adatum.com.
• B. Exchange certificates with the administrators of adatum.com.
• C. From EDGE1, create a Send connector that has an address space for adatum.com
• D. Run the Set-TransportConfigcmdlet.
• E. Run the Set-TransportServercmdlet.
• F. From a Mailbox server, create a Send connector that has an address space for adatum.com.

Answer: BDF

NEW QUESTION 16

Your company has an Exchange Server 2013 organization. All servers have the Client Access server role and the Mailbox server role installed.
The DNS Manager is shown in the exhibit. (Click the Exhibit button.)

Use the drop-down menus to select the answer choice that completes each statement.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 17

You have an Exchange Server 2013 organization.
An Active Directory administrator is concerned about the permissions assigned to a group named Exchange Trusted Subsystem. Exchange Trusted Subsystem has a member named Exchange Windows Permissions.
You need to show the Active Directory administrator all of the permissions assigned to Exchange Trusted Subsystem.
What should you use?

• A. ADSI Edit
• B. Active Directory Sites and Services
• C. Dsget
• D. Active Directory Users and Computers

Answer: D

NEW QUESTION 18

Your company has five main offices. Each office contains a data center.
You plan to deploy an Active Directory forest and an Exchange Server 2013 organization. Each office will be configured as a separate Active Directory site. User mailboxes will be hosted in each site.
You need to recommend an Exchange Server 2013 deployment strategy that meets the following requirements:
Provides redundancy for all mailbox databases
Creates a temporary copy of outbound email messages
Minimizes the number of servers deployed to the network
Provides redundancy for client access by using Network Load Balancing (NLB) What should you recommend?

• A. In each site, deploy one server that has both the Mailbox server role and the Client Access server role installed and another server that has the Client Access server role installed.
• B. In each site, deploy one server that has the Mailbox server role installed and two servers that have the Client Access server role installed.
• C. In each site, deploy one server that has both the Mailbox server role and the Client Access server role installed.
• D. In each site, deploy two servers that have both the Mailbox server role and the Client Access server role installed.

Answer: B

Explanation:
WNLB can't be used on Exchange servers where mailbox DAGs are also being used because WNLB is
incompatible with Windows failover clustering. If you're using an Exchange 2013 DAG and you want to use WNLB, you need to have the Client Access server role and the Mailbox server role running on separate servers.
References:
https://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx

NEW QUESTION 19

You have an Exchange Server 2013 organization that contains two Client Access servers named SERVER1 and SERVER2 and two Mailbox servers named 5ERVER3 and SERVER4.
You have a firewall that controls all of the traffic between the internal network and the Internet. SERVER3 and SERVER4 are prevented from communicating with Internet hosts.
SERVER1 and SERVER3 are in a site named Main. 5ERVER2 and SERVER4 are in a site named Main_2. All outbound email is sent through SERVER1.
Main fails.
You discover that email messages for the Internet are queued on SERVER4. You create a new send connector in Main_2.
You discover that all of the outbound email is queued on 5ERVER4 and is not delivered to the Internet.
You verify that the client computers on the network can receive email messages from the Internet successfully. You need to ensure that the email messages are delivered successfully to the Internet.
Which cmdlet should you run?

• A. Set-SendConnector
• B. Set-TransportService
• C. Set-ExchangeServer
• D. Set-ADSite

Answer: A

NEW QUESTION 20

You plan to deploy an Exchange Server 2013 organization. The organization will contain the servers configured as shown in the following table.

Server1, Server2, and Server3 will be members of a database availability group (DAG) named DAG1. You deploy a firewall between the internal network and the Internet.
You need to recommend a solution to meet the following requirements:
- Ensure that users can access their mailbox from the Internet by using Microsoft Outlook if a server fails.
- Ensure that users can access Unified Messaging (UM) services from the Internet if a server fails.
- Minimize costs.
What should you recommend? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References: https://practical365.com/exchange-server/exchange-2013-client-access-server-high-availability/

NEW QUESTION 21
HOTSPOT
You need to recommend a solution to meet the business requirements for users accessing their email messages.
Which command should you include in the recommendation? (To answer, select the appropriate options in the answer area.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 22

You have an Exchange Server 2013 organization.
You deploy an anti-spam appliance and you connect the appliance to the Exchange Server organization. You need to disable keyword filtering of email messages that are received from the Internet.
Which Windows PowerShell cmdlet should you use?

• A. Set-SenderFilterConfi
• B. Set-ReceiveConnector
• C. Disable-TransportAgent
• D. Disable-Service

Answer: C

Explanation:
References: https://technet.microsoft.com/en-us/library/aa997880(v=exchg.160).aspx

NEW QUESTION 23

You are testing the planned implementation of Exchange Server 2013.
After you begin moving several mailboxes to Exchange Server 2013, you discover that users on the internal network that have been moved are prompted repeatedly for their credentials when they run Microsoft Outlook.
You run the Get-OutlookAnywhere cmdlet on CH-EX4, and receive the following output:

You need to prevent the internal users from being prompted for their credentials when they connect to their mailbox by using Outlook.
Which property should you modify by using the Set-OutlookAnywhere cmdlet?

• A. IISAuthenticationMethods
• B. InternalHostname
• C. ExternalHostname
• D. ExternalClientAuthenticationMethod
• E. InternalClientAuthenticationMethod

Answer: A

NEW QUESTION 24

Your network contains an Active Directory forest named contoso.com. The forest contains an enterprise root certification authority (CA) named CA1. The network contains a server named EX1 that has Exchange Server 2013 installed.
A partner company named A. Datum Corporation has an Active Directory domain named adatum.com. The domain contains a server named EX5 that has Exchange Server 2010 Service Pack 2 (SP2) installed. EX5 has a Receive connector that is configured for mutual TLS.
Users in contoso.com plan to send email messages that contain sensitive data to users in adatum.com. You need to ensure that all of the email messages sent from contoso.com to adatum.com are encrypted by
using TLS. The solution must ensure that EX1 and EX5 validate server certificates.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

• A. Run the set-transportconfig -tlssenddomainsecurelist contoso.com command.
• B. Install a certificate, and then assign the certificate to the IIS servic
• C. Send the root certificate for contoso.com to the administrators in adatum.com.
• D. Run the New-SendConnector cmdlet and specify the domainsecureenabled parameter.
• E. Run the New-SendConnector cmdlet and specify the tlsdomainparameter.
• F. Run the set-transportconfig -tlssenddomainsecurelist adatum.com command.
• G. Install a certificate, and then assign the certificate to the SMTP servic
• H. Send the root certificate for contoso.com to the administrators in adatum.com.

Answer: ADF

NEW QUESTION 25

Your network contain an Active Directory forest. The forest contains a single domain named contoso.com. The network contains a legacy mail system that uses a SMTP namespace of contoso.com.
You plan to deploy Exchange Server 2013.
There will be a period of interoperability while the email is migrated from the legacy system to Exchange Server 2013.
During the period of interoperability, you need to ensure that all incoming email is received by an Exchange Server 2013 server, and then routed to the legacy mail system if an Exchange Server email recipient cannot be found.
You configure the firewall in the perimeter network to route SMTP traffic to the Exchange Server 2013 organization.
What should you do next?

• A. Modify the existing accepted domain for contoso.com and create a new Send connector.
• B. Add a new external relay accepted domain for contoso.com and create a new Send connector.
• C. Add a new authoritative domain for contoso.com and create a new email address policy.
• D. Add a new internal relay accepted domain for contoso.com and create a new email address policy.

Answer: A

NEW QUESTION 26

You have an Exchange Server 2013 organization that contains a server named EX1. You have a user named User1 in the marketing department.
You need to prevent User1 from submitting more than 50 email messages per minute to the Exchange Server organization by using Microsoft Outlook.
Which three commands should you run?
To answer, move the three appropriate commands from the list of commands to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 27
HOTSPOT
You create a workload management policy named EX4.
You need to create a new workload policy to resolve the hardware resources issue on EX4. Which commands should you run? (To answer, select the appropriate options in the
answer area.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 28

A company named Fabrikam, Ltd. has an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.

You configure the internal and external namespaces named mail.fabrikam.com and autodiscover.fabrikam.com to point to EX2.
You configure Outlook Anywhere on EX1 as shown in the following table.

You configure Outlook Anywhere on EX2 as shown in the following table.

You need to ensure that all of the users on EX1 can connect to their mailbox by using Microsoft Outlook from the Internet.
What should you do?

• A. Change the authentication settings of EX1.
• B. Disable IPv6 on EX1.
• C. Change the authentication settings of EX2.
• D. Disable Outlook Anywhere on EX1.

Answer: A

NEW QUESTION 29
......