Accurate AZ-102 Free Practice Questions 2019

It is impossible to pass Microsoft AZ-102 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed AZ-102 Dumps. You will get a surprising result by our AZ-102 Free Practice Questions.

Online Microsoft AZ-102 free dumps demo Below:

NEW QUESTION 1
Note This question is part of a series of questions that present the same seer Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage a virtual network named VNet1 that is hosted in the West US Azure region. VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours. Solution: From Performance Monitor, you create a Data Collector Set (DCS)
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation: You should use Azure Network Watcher. References:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-monitoring-overview

NEW QUESTION 2
DRAG DROP
You have an Azure subscription that contains an Azure virtual machine named VM1. VM1 runs Windows Server 2016 and is part of an availability set.
VM1 has virtual machine-level backup enabled. VM1 is deleted.
You need to restore VM1 from the backup. VM1 must be part of the availability set.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-102 dumps exhibit

    Answer:

    Explanation: AZ-102 dumps exhibit

    NEW QUESTION 3
    Note: This question is part of a series of Questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this section, you will NOT be able to return to it. As a result, these Questions will not appear in the review screen.
    You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
    You need to view the date and time when the resources were created in RG1. Solution: From the RG1 blade, you click Deployments.
    Does this meet the goal?

    • A. Yes
    • B. No

    Answer: A

    NEW QUESTION 4
    You have an Azure Service Bus.
    You create a queue named Queue1. Queue1 is configured as shown in the following exhibit.
    AZ-102 dumps exhibit
    Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
    NOTE: Each correct selection is worth one point.
    AZ-102 dumps exhibit

      Answer:

      Explanation: Box 1: deleted after two hours
      All messages sent into a queue or topic are subject to a default expiration that is set at the entity level with the defaultMessageTimeToLive property and which can also be set in the portal during creation and adjusted later. The default expiration is used for all messages sent to the entity where TimeToLive is not explicitly set. The default expiration also functions as a ceiling for the TimeToLive value. Messages that have a longer TimeToLive expiration than the default value are silently adjusted to the defaultMessageTimeToLive value before being enqueued.
      Box 2: deleted in one hour References:
      https://docs.microsoft.com/en-us/azure/service-bus-messaging/message-expiration

      NEW QUESTION 5
      From the MFA Server blade, you open the Block/unblock users blade as shown in the exhibit.
      AZ-102 dumps exhibit
      What caused AlexW to be blocked?

      • A. An administrator manually blocked the user.
      • B. The user reports a fraud alert when prompted for additional authentication.
      • C. The user account password expired.
      • D. The user entered an incorrect PIN four times within 10 minute

      Answer: B

      NEW QUESTION 6
      DRAG DROP
      You have an on-premises file server named Server1 that runs Windows Server 2016. You have an Azure subscription that contains an Azure file share.
      You deploy an Azure File Sync Storage Sync Service, and you create a sync group. You need to synchronize files from Server1 to Azure.
      Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
      AZ-102 dumps exhibit

        Answer:

        Explanation: Step 1: Install the Azure File Sync agent on Server1
        The Azure File Sync agent is a downloadable package that enables Windows Server to be synced with an Azure file share
        Step 2: Register Server1.
        Register Windows Server with Storage Sync Service
        Registering your Windows Server with a Storage Sync Service establishes a trust relationship between your server (or cluster) and the Storage Sync Service.
        Step 3: Add a server endpoint
        Create a sync group and a cloud endpoint.
        A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in sync with each other. A sync group must contain one cloud endpoint, which represents an Azure file share and one or more server endpoints. A server endpoint represents a path on registered server. References: https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deploymentguide

        NEW QUESTION 7
        Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
        After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
        You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named Developers. Subscription1 contains a resource group named Dev.
        You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
        Solution: On Subscription1, you assign the Logic App Operator role to the Developers group. Does this meet the goal?

        • A. Yes
        • B. No

        Answer: B

        Explanation: The Logic App Operator role only lets you read, enable and disable logic app. With it you can view the logic app and run history, and enable/disable. Cannot edit or update the definition.
        You would need the Logic App Contributor role. References:
        https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-securing-a-logic-app

        NEW QUESTION 8
        SIMULATION
        Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        AZ-102 dumps exhibit
        When you are finished performing all the tasks, click the ‘Next’ button.
        Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
        Overview
        The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
        Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
        Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
        To start the lab
        You may start the lab by clicking the Next button.
        You plan to create 100 Azure virtual machines on each of the following three virtual networks: VNET1005a
        VNET1005b VNET1005c
        All the network traffic between the three virtual networks will be routed through VNET1005a. You need to create the virtual networks, and then to ensure that all the Azure virtual machines can connect to other virtual machines by using their private IP address. The solution must NOT require any virtual network gateways and must minimize costs.
        What should you do from the Azure portal before you configure IP routing?

          Answer:

          Explanation: Step 1: Click Create a resource in the portal.
          Step 2: Enter Virtual network in the Search the Marketplace box at the top of the New pane that appears. Click Virtual network when it appears in the search results.
          Step 3: Select Classic in the Select a deployment model box in the Virtual Network pane that appears, then click Create.
          Step 4: Enter the following values on the Create virtual network (classic) pane and then click Create: Name: VNET1005a
          Address space: 10.0.0.0/16 Subnet name: subnet0 Resource group: Create new
          Subnet address range: 10.0.0.0/24
          Subscription and location: Select your subscription and location.
          Step 5: Repeat steps 3-5 for VNET1005b (10.1.0.0/16, 10.1.0.0/24), and for VNET1005c 10.2.0.0/16, 10.2.0.0/24).
          References: https://docs.microsoft.com/en-us/azure/virtual-network/create-virtual-network-classic

          NEW QUESTION 9
          You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com. Your company has a public DNS zone for contoso.com.
          You add contoso.com as a custom domain name to Azure AD You need to ensure that Azure can verify the domain name. Which type of DNS record should you create?

          • A. PTR
          • B. MX
          • C. NSEC3
          • D. RRSIG

          Answer: B

          Explanation: To verify your custom domain name (example)
          Sign in to the Azure portal using a Global administrator account for the directory. Select Azure Active Directory, and then select Custom domain names.
          On the Fabrikam - Custom domain names page, select the custom domain name, Contoso.
          On the Contoso page, select Verify to make sure your custom domain is properly registered and is valid for Azure AD. Use either the TXT or the MX record type.
          AZ-102 dumps exhibit
          References:
          https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-domain

          NEW QUESTION 10
          HOT SPOT
          You have an Azure subscription named Subscription1.
          In Subscription1, you create an Azure file share named share1.
          You create a shared access signature (SAS) named SAS1 as shown in the following exhibit.
          AZ-102 dumps exhibit
          To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
          AZ-102 dumps exhibit

            Answer:

            Explanation: Box 1: Will be prompted for credentials
            Azure Storage Explorer is a standalone app that enables you to easily work with Azure Storage data on Windows, macOS, and Linux. It is used for connecting to and managing your Azure storage accounts.
            Box 2: Will have read, write, and list access
            The net use command is used to connect to file shares. References:
            https://docs.microsoft.com/en-us/azure/storage/common/storage-dotnet-shared-access-signaturepart- https://docs.microsoft.com/en-us/azure/vs-azure-tools-storage-manage-with-storageexplorer? tabs=windows

            NEW QUESTION 11
            DRAG DROP
            You have an Azure subscription that is used by four departments in your company. The subscription contains 10 resource groups. Each department uses resources in several resource groups.
            You need to send a report to the finance department. The report must detail the costs for each department. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
            AZ-102 dumps exhibit

              Answer:

              Explanation: Box 1: Assign a tag to each resource.
              You apply tags to your Azure resources giving metadata to logically organize them into a taxonomy. After you apply tags, you can retrieve all the resources in your subscription with that tag name and value. Each resource or resource group can have a maximum of 15 tag name/value pairs. Tags applied to the resource group are not inherited by the resources in that resource group.
              Box 2: From the Cost analysis blade, filter the view by tag
              After you get your services running, regularly check how much they're costing you. You can see the current spend and burn rate in Azure portal.
              Visit the Subscriptions blade in Azure portal and select a subscription. You should see the cost breakdown and burn rate in the popup blade.
              Click Cost analysis in the list to the left to see the cost breakdown by resource. Wait 24 hours after you add a service for the data to populate.
              You can filter by different properties like tags, resource group, and timespan. Click Apply to confirm the filters and Download if you want to export the view to a Comma-Separated Values (.csv) file. Box 3: Download the usage report
              References:
              https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags https://docs.microsoft.com/en-us/azure/billing/billing-getting-started

              NEW QUESTION 12
              You need to prevent remote users from publishing via FTP to a function app named FunctionApplod7509087fa. Remote users must be able to publish via FTPS. What should you do from the Azure portal?

                Answer:

                Explanation: Step 1:
                Locate and select the function app FunctionApplod7509087fa. Step 2:
                Select Application Settings > FTP Access, change FTP access to FTPS Only, and click Save.
                AZ-102 dumps exhibit
                References:
                https://blogs.msdn.microsoft.com/appserviceteam/2018/05/08/web-apps-making-changes-to-ftpdeployments/

                NEW QUESTION 13
                HOT SPOT
                You need to prepare the environment to implement the planned changes for Server2. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
                AZ-102 dumps exhibit

                  Answer:

                  Explanation: Box 1: Create a Recovery Services vault
                  Create a Recovery Services vault on the Azure Portal. Box 2: Install the Azure Site Recovery Provider
                  Azure Site Recovery can be used to manage migration of on-premises machines to Azure. Scenario: Migrate the virtual machines hosted on Server1 and Server2 to Azure.
                  Server2 has the Hyper-V host role. References:
                  https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-premises-azure

                  Case Study: 8
                  Mix Questions Set C (Evaluate and perform server migration to Azure)

                  NEW QUESTION 14
                  You have five Azure virtual machines that run Windows Server 2016.
                  You have an Azure load balancer named LB1 that provides load balancing se
                  You need to ensure that visitors are serviced by the same web server for each request. What should you configure?

                  • A. Floating IP (direct server return) to Disable
                  • B. Session persistence to Client IP
                  • C. a health probe
                  • D. Session persistence to None

                  Answer: B

                  Explanation: You can set the sticky session in load balancer rules with setting the session persistence as the client IP.
                  References:
                  https://cloudopszone.com/configure-azure-load-balancer-for-sticky-sessions/

                  NEW QUESTION 15
                  HOT SPOT
                  You have an Azure subscription named Subscription1. Subscription1 contains the resources in the following table.
                  AZ-102 dumps exhibit
                  In Azure, you create a private DNS zone named adatum.com. You set the registration virtual network to VNet2. The adatum.com zone is configured as shown in the following exhibit.
                  AZ-102 dumps exhibit
                  For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
                  AZ-102 dumps exhibit

                    Answer:

                    Explanation: Box 1: No
                    Azure DNS provides automatic registration of virtual machines from a single virtual network that's linked to a private zone as a registration virtual network. VM5 does not belong to the registration virtual network though.
                    Box 2: No
                    Forward DNS resolution is supported across virtual networks that are linked to the private zone as resolution virtual networks. VM5 does belong to a resolution virtual network.
                    Box 3: Yes
                    VM6 belongs to registration virtual network, and an A (Host) record exists for VM9 in the DNS zone. By default, registration virtual networks also act as resolution virtual networks, in the sense that DNS resolution against the zone works from any of the virtual machines within the registration virtual network.
                    References: https://docs.microsoft.com/en-us/azure/dns/private-dns-overview

                    NEW QUESTION 16
                    You have an Azure subscription that contains 10 virtual machines.
                    You need to ensure that you receive an email message when any virtual machines are powered off, restarted, or deallocated.
                    What is the minimum number of rules and action groups that you require?

                    • A. three rules and three action groups
                    • B. one rule and one action group
                    • C. three rules and one action group
                    • D. one rule and three action groups

                    Answer: C

                    Explanation: An action group is a collection of notification preferences defined by the user. Azure Monitor and Service
                    Health alerts are configured to use a specific action group when the alert is triggered. Various alerts may use the same action group or different action groups depending on the user's requirements. References: https://docs.microsoft.com/en-us/azure/monitoring-and-diagnostics/monitoring-actiongroups

                    NEW QUESTION 17
                    Your marketing team creates a new website that you must load balance for 99.99 percent availability. You need to deploy and configure a solution for both machines in the Web-AS availability set to load balance the website over HTTP. The solution must use the load balancer your resource group.
                    What should you do from the Azure portal?

                      Answer:

                      Explanation: To distribute traffic to the VMs in the availability set, a back-end address pool contains the IP addresses of the virtual NICs that are connected to the load balancer. Create the back-end address pool to include the VMs in the availability set.
                      Step 1:
                      Select All resources on the left menu, and then select LoadBalancer from the resource list. Step 2:
                      Under Settings, select Backend pools, and then select Add. Step 3:
                      On the Add a backend pool page, select the Web-AS availability set, and then select OK:
                      AZ-102 dumps exhibit
                      References:
                      https://docs.microsoft.com/en-us/azure/load-balancer/quickstart-create-basic-load-balancer-portal

                      NEW QUESTION 18
                      SIMULATION
                      Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
                      AZ-102 dumps exhibit
                      AZ-102 dumps exhibit
                      AZ-102 dumps exhibit
                      AZ-102 dumps exhibit
                      AZ-102 dumps exhibit
                      AZ-102 dumps exhibit
                      When you are finished performing all the tasks, click the ‘Next’ button.
                      Note that you cannot return to the lab once you click the ‘Next’ button. Scoring occur in the background while you complete the rest of the exam.
                      Overview
                      The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
                      Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
                      Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
                      To start the lab
                      You may start the lab by clicking the Next button.
                      You need to create a virtual network named VNET1008 that contains three subnets named subnet0, subnet1, and subnet2. The solution must meet the following requirements:
                      Connections from any of the subnets to the Internet must be blocked. Connections from the Internet to any of the subnets must be blocked.
                      The number of network security groups (NSGs) and NSG rules must be minimized. What should you do from the Azure portal?

                        Answer:

                        Explanation: Step 1: Click Create a resource in the portal.
                        Step 2: Enter Virtual network in the Search the Marketplace box at the top of the New pane that appears. Click Virtual network when it appears in the search results.
                        Step 3: Select Classic in the Select a deployment model box in the Virtual Network pane that appears, then click Create.
                        Step 4: Enter the following values on the Create virtual network (classic) pane and then click Create: Name: VNET1008
                        Address space: 10.0.0.0/16 Subnet name: subnet0 Resource group: Create new
                        Subnet address range: 10.0.0.0/24
                        Subscription and location: Select your subscription and location.
                        Step 5: In the portal, you can create only one subnet when you create a virtual network. Click Subnets (in the SETTINGS section) on the Create virtual network (classic) pane that appears. Click +Add on the VNET1008 - Subnets pane that appears.
                        Step 6: Enter subnet1 for Name on the Add subnet pane. Enter 10.0.1.0/24 for Address range. Click OK.
                        Step 7: Create the third subnet: Click +Add on the VNET1008 - Subnets pane that appears. Enter subnet2 for Name on the Add subnet pane. Enter 10.0.2.0/24 for Address range. Click OK. References: https://docs.microsoft.com/en-us/azure/virtual-network/create-virtual-network-classic

                        Case Study: 4,
                        Mix Questions Set A (Implement and manage application services)

                        P.S. Easily pass AZ-102 Exam with 195 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy AZ-102 Dumps: https://www.2passeasy.com/dumps/AZ-102/ (195 New Questions)