What Practical AZ-801 Practice Is

NEW QUESTION 1

You have 50 on-premises servers that run Windows Server. You have an Azure subscription that contains 50 virtual machines that run Windows Server.
You need to create an Azure Monitor alert that will be triggered if one of the servers or virtual machines has less than 10 percent available disk space.
What should you do first?

• A. Create an Alert Rule
• B. Install the Azure Monitor agent on each server.
• C. Enable System Insights on each server.
• D. Create a Log Analytics workspace and configure the Agent management settings.

Answer: A

Explanation:
https://learn.microsoft.com/en-us/answers/questions/165893/help-to-set-up-azure-alert-for-disk-space-alert-wh.h

NEW QUESTION 2

You have a failover cluster named Cluster1 that hosts an application named App1.
The General tab in App1 Properties is shown in the General exhibit (Click the General Tat) The failover tab in App1 Properties is shown in the failover exhibit (Click the Failover tab.)
Server 1 shuts down unexpectedly.
You need to ensure that when you start Server 1. App1 continues to run on Server2
Solution: From the General settings, you increase the priority of Server2 in the Preferred Owners list. Does this meet the goal?

• A. Yes
• B. NO

Answer: B

NEW QUESTION 3

You have two Azure virtual machines named VM1 and VM2. VM1 is backed up to an Azure Recovery Services vault daily and retains backups for 30 days.
You need to restore an individual file named C:\Data\Important.docx from VM1 to VM2. The solution must minimize administrative effort.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4

You have two servers that have the Web Server (IIS) server role installed. The servers are configured as shown in the following table.

Both servers are configured to enable website deployment by using the Web Deployment Tool. Server1 hosts a website named Site1 that has Web Deploy Publishing configured.
You plan to migrate Site1 to Server2.
You need to perform a pull synchronization of Site1 by using the Web Deployment Agent Service. How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5

Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server. All the servers are on the same network and have network connectivity.
On Server1, Windows Defender Firewall has a connection security rule that has the following settings:
• Rule Type: Server-to-server
• Endpoint 1: Any IP address
• Endpoint 2: Any IP address
• Requirements: Require authentication for inbound connections and request authentication for outbound connections
• Authentication Method: Computer (Kerberos V5)
• Profile: Domain, Private, Public
• Name: Rule1
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 6

You have a server that runs Windows Server.
You plan to back up the server to an Azure Recovery Services vault once per week starting on the next Saturday.
You need to schedule the weekly backup and perform the initial backup as soon as possible.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer are and arrange them in the correct order.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 7

You have an Azure virtual machine named VM1 that has the Web Server (IIS) server role installed. VM1 hosts a critical line-of-business (LOB) application.
After the security team at your company deploys a new security baseline to VM1, users begin reporting that the application is unresponsive.
You suspect that the security baseline has caused networking issues. You need to perform a network trace on VM1.
What should you do?

• A. From VM1, run necscac.
• B. From Performance Monitor on VM1. create a Data Collector Set.
• C. From the Azure portal, configure the Diagnostics settings for VM1.
• D. From the Azure portal, configure the Performance diagnostics settings for VM1.

Answer: D

Explanation:
Reference:
https://docs.microsoft.com/en-us/troubleshoot/azure/virtual-machines/performance-diagnostics

NEW QUESTION 8

You have a server that runs Windows Server and has the Web Server (IIS) server role installed. Server1 hosts a single website that has the following configurations:
Is accessible by using a URL of https://www.contoso.com:8443 and has an SSL certificate that was issued by a third-party certification authority (CA) in the Microsoft Trusted Root Program
Uses anonymous authentication
Was developed by using PHP
You plan to use APP Service Migration Assistant to migrate the website to Azure App Service.
You need to migrate the website. The solution must minimize the number of changes made to the existing website.
What should you do manually to ensure that the website migration is successful? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 9

You have a Hyper-V failover cluster named Cluster1 that uses a cloud witness. Cluster1 hosts a virtual
machine named VM1 that runs Windows Server.
You need to fail over VM1 automatically to a different node when a service named Service1 on VM1 fails. What should you do on Cluster1 and VM1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 10

You have a failover cluster named Cluster1 that contains three Windows Server nodes named Node 1, Node2. and Node3.
You need to deploy a Storage Spaces Direct virtual disk to Cluster1. You add the following disks to each node:
• Three 512-6B NVMe disks
• Three 3-TB diskS
• Three 1-TB SSD disks
On Cluster1. you enable Storage Spaces Direct and add the new disks.
What is the total amount of disk space available for the Storage Spaces Direct virtual disk, and which operations are cached for the SSD and HDD disks? To answer, select the appropriate options in the answer area.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11

You deploy Azure Migrate to an on-premises network.
You have an on-premises physical server named Server1 that runs Windows Server and has the following configuration.
Operating system disk 600 GB Data disic 3 TB
NIC Teaming: Enabled Mobility service: installed Windows Firewall: Enabled
Microsoft Defender Antivirus: Enabled
You need to ensure that you can use Azure Migrate to migrate Server1. Solution: You disable Windows Firewall on Server1.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 12

You need to use a comma-separated value (CSV) file to import server inventory to Azure Migrate. Which fields are mandatory for each entry in the CSV file?

• A. Server nam
• B. Cores, OS Name, and Memory (in MB)
• C. Server name, IP addresse
• D. Disk 1 size (in GB), and CPU utilization percentage
• E. Server name, IP addresses, OS version, and Number of disks

Answer: B

NEW QUESTION 13

You have an on-premises server named Server1 and Microsoft Sentinel instance.
You plan to collect windows Defender Firewall events from Sever1 and analyze the event data by using Microsoft Sentinel.
What should you install on Server1, and which information should you provide during the instance? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14

You have an Azure subscription that contains an Azure Recovery Services vault. You have an on-premises physical server that runs Windows Server.
You need to back up the server daily to Azure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15

Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains the organizational units (OUs) shown in the following table.

In the domain, you create the Group Policy Objects (GPOs) shown in the following table.

You need to implement IPsec authentication to ensure that only authenticated computer accounts can connect to the members in the domain. The solution must minimize administrative effort.
Which GPOs should you apply to the Domain Controllers OU and the Domain Servers OU? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 16

Your company uses Storage Spaces Direct.
You need to view the available storage in a Storage Space Direct storage pool. What should you use?

• A. File Server Resource Manager (FSRM)
• B. the Get-StorageSubsystem cmdlet
• C. Disk Management
• D. Windows Admin Center

Answer: D

NEW QUESTION 17

You have three Azure virtual machines named VM1, VM2, and VM3 that host a multitier application. You plan to implement Azure Site Recovery.
You need to ensure that VM1, VM2, and VM3 fail over as a group. What should you configure?

• A. an availability zone
• B. a recovery plan
• C. an availability set

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/site-recovery-overview

NEW QUESTION 18

Your network contains an Active Directory Domain Services (AD DS) domain All domain members have Microsoft Defender Credential Guard with UEFI tock configured in the domain you deploy a server named Server1 that runs Windows Server. You disable Credential Guard on Server1. You need to ensure that Server1 is MOST subject to Credential Guard restrictions. What should you do next?

• A. Run the Device Guard and Credential Guard hardware readiness tool
• B. Disable the Turn on Virtual nation Based Security group policy setting
• C. Run dism and specify the /Disable-Feature and /FeatureName:IsolatedUserMode parameters

Answer: B

NEW QUESTION 19

You have an Azure subscription. The subscription contains a virtual machine named VM1 that runs Windows Server. The subscription contains the storage accounts shown in the following table.

You plan to enable boot diagnostics for VM1.
You need to configure storage for the boot diagnostics logs and snapshots. Which storage account should you use?

• A. storage1
• B. storage2
• C. storage3

Answer: C

NEW QUESTION 20

You need to configure BitLocker on Server4.
On which volumes can you turn on BitLocker, and on which volumes can you turn on auto-unlock? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 21
......