The Secret Of ASQ CSSBB Exam Prep

NEW QUESTION 1

Find the value of (12) in the ANOVA table. Assume:

• A. 16.4
• B. 3.2
• C. 18.6
• D. 23.2
• E. 4.54
• F. 12.2
• G. 0.525
• H. 2.82
• I. 1.48
• J. 35.4
• K. 0.10<P<1
• L. 0.05<P<0.10
• M. 0.01<P<0.05
• N. 0.005<P<0.01
• O. 0<P<0.005

Answer: N

NEW QUESTION 2

This table displays the inventory of fasteners in a storage cabinet. A bolt is selected at random from the fastener cabinet. Find the approximate probability it is size 7/8.

• A. 11
• B. .08
• C. .09
• D. .30
• E. none of the above

Answer: A

NEW QUESTION 3

“Robust design” refers to the ability of the product or service:

• A. to function the same in different conditions
• B. to remain strong
• C. to last a long time
• D. to have a high reliability

Answer: A

NEW QUESTION 4

Calculate the interaction effect

• A. 1.5
• B. 205
• C. –5
• D. 17
• E. –17

Answer: C

NEW QUESTION 5

A robust design is one which:

• A. has high reliability
• B. has low maintenance frequency
• C. is simple to manufacture
• D. is resistant to varying environmental conditions

Answer: D

NEW QUESTION 6


This is an example of part of a:

• A. QFD Matrix
• B. Activity Network Diagram
• C. Interrelationship Diagram
• D. Affinity Diagram

Answer: A

NEW QUESTION 7

An approach that would remove the contradiction identified in x.28 would be:

• A. find an inexpensive way to apply multiple coats
• B. find an inexpensive material that will provide an excellent finish with one coat.
• C. all of the above
• D. none of the above

Answer: C

NEW QUESTION 8

What is the value of the test statistic?

• A. 0.898
• B. 1.251
• C. 0.429
• D. 3.57
• E. none of the above

Answer: E

Explanation:
As per reference to the given table in the URL, the 0.05 at 6 is 2.447. Hence none of the answers are correct.
Reference: http://www.medcalc.org/manual/t-distribution.php

NEW QUESTION 9

As opposed to earlier emphases lean manufacturing tends to stress:

• A. making value added activities more efficient
• B. eliminating, simplifying or reducing non-value added activities

Answer: B

NEW QUESTION 10

The mean, median and mode of a distribution have the same value. What can be said about the distribution:

• A. it is exponential
• B. it is normal
• C. it is uniform
• D. none of the above

Answer: D

NEW QUESTION 11

The operators of a manufacturing cell work out a more orderly arrangement for tool storage and establish a schedule to maintain cleanliness on a daily basis. These improvements are best described by which approach to problem solving?

• A. 5S
• B. Poka yoke
• C. Kaizen
• D. PDCA
• E. Re-engineering

Answer: A

NEW QUESTION 12

Find the value of m or b1:

• A. 0.25
• B. 0.63
• C. 0.75
• D. 1.22

Answer: C

NEW QUESTION 13

Find the value of (3) in the ANOVA table. Assume:

• A. 16.4
• B. 3.2
• C. 18.6
• D. 23.2
• E. 4.54
• F. 12.2
• G. 0.525
• H. 2.82
• I. 1.48
• J. 35.4
• K. 0.10<P<1
• L. 0.05<P<0.10
• M. 0.01<P<0.05
• N. 0.005<P<0.01
• O. 0<P<0.005

Answer: E

NEW QUESTION 14

An important step in determining the VOC is:

• A. establish viable or comprehensive process feedback loops
• B. ascertain the principles that are values of the corporation
• C. identify the customer
• D. measure the virtual operating continuum potential
• E. all of the above
• F. none of the above

Answer: C

NEW QUESTION 15

Proposed Six Sigma projects that are not in some way linked to organizational goals:

• A. will typically be short term
• B. use statistical inference
• C. have a high risk of failure
• D. should not be approved
• E. none of the above

Answer: D

NEW QUESTION 16

SCENARIO A Six Sigma team is measuring the moisture content of corn starch as it leaves the conveyer belt of a dryer. They collect one sample four cups of starch at times indicated in the chart at fixed locations labeled A, B, C, and D across the end of the belt. See the diagram below.

The data for a nine hour period are:


Which type of variation dominates? (Hint: Plot the points on the graph above.)

• A. within sample
• B. sample to sample within the hour
• C. hour to hour
• D. none of the above

Answer: A

NEW QUESTION 17

= 0.05 A sample of size 50 from machine A has a mean of 18.2 and standard deviation 3.1. A sample of size 40 from machine B has mean 17.6 and standard deviation 2.8. Do these data indicate that the population for machine A has a larger mean? Assume the populations are normal.

• A. yes
• B. no

Answer: B

NEW QUESTION 18

A set of data from a process has 8 readings per sample and 50 samples. The mean of the 50 sample means is 12.62. The mean of the 50 ranges is 0.18.A customer requires that SPC charts be done on their forms which have spaces for only 5 readings per sample. What should be the UCL and LCL for tbe new averages chart?

• A. 12.53 and 12.71
• B. 12.58 and 12.66
• C. 11.61 and 13.63
• D. none of the above

Answer: A

NEW QUESTION 19

The word takt is closest to the theory of constraints word:

• A. drum
• B. buffer
• C. rope
• D. constraint

Answer: A

NEW QUESTION 20

Is this a left-tail, right-tail or two-tail test?

• A. no
• B. left-tail
• C. right-tail
• D. two-tail

Answer: C

NEW QUESTION 21

In an experimental design context, replication refers to:

• A. duplicating experimental results at another location
• B. repeating a test with the same factor levels
• C. obtaining the same or similar results from different factors
• D. repeating an experiment but using at least one different factor level

Answer: C

NEW QUESTION 22

A team wants a technique for displaying the connection between various customer needs and various features on a product. They should use:

• A. written and diagrammed work instructions
• B. flow charts and process maps
• C. cause and effect diagrams
• D. Pareto chart
• E. relationship matrix

Answer: E

NEW QUESTION 23

A pharmaceutical manufacturer is designing an experiment to test four different capsule ingredients designed to reduce dissolution time. Each ingredient will be tested at 10 milligrams and 40 milligrams. A full factorial design is used with five replications per run. The number of levels, factors and runs is, respectively:

• A. 2, 4, 16
• B. 4, 5, 8
• C. 10, 4, 40
• D. 2, 20, 16

Answer: A

NEW QUESTION 24

Find the value of (8) in the ANOVA table. Assume:

• A. 16.4
• B. 3.2
• C. 18.6
• D. 23.2
• E. 4.54
• F. 12.2
• G. 0.525
• H. 2.82
• I. 1.48
• J. 35.4
• K. 0.10<P<1
• L. 0.05<P<0.10
• M. 0.01<P<0.05
• N. 0.005<P<0.01
• O. 0<P<0.005

Answer: O

NEW QUESTION 25

The team in the above problem draws arrows from Post-It® notes that are causes to notes that are the effects of these causes. This step is best described by which approach to problem solving?

• A. Affinity diagram
• B. Inter-relationship digraph
• C. Tree diagram
• D. Process decision program chart
• E. Matrix diagram
• F. Prioritization matrix
• G. Activity network diagram

Answer: B

NEW QUESTION 26
......