The Most Up-to-date Guide To DES-6322 Practice Question

NEW QUESTION 1
From what location should NVT for VxRail be run?

• A. Jump server on a different network
• B. Workstation on the same network as VxRail Manager
• C. VxRail network Top of Rack switch
• D. Laptop connected to the first VxRail ESXi node

Answer: B

NEW QUESTION 2
In a VxRail Stretched Cluster deployment of 8 nodes on between sites?

• A. Primary to Witness site RTT: < 250 ms Secondary to Witness site RTT; < 250 ms Primary to Secondary site RTT: < 5 ms
• B. Primary to Witness site RTT: < 150 ms Secondary to Witness site RTT: < 150 ms Primary to Secondary site RTT: < 10 ms
• C. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT: < 200 ms Primary to Secondary site RTT: <: 5 ms
• D. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT < 200 ms Primary to Secondary site RTT: < 10 ms

Answer: B

NEW QUESTION 3
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?

• A. SSH to the VxRail Manager VM with the mystic user SU to rootGo to the /opt/VxRail/config directorySCP the initial-config json file to a local location
• B. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data SentUse the Download option
• C. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directoryGET the config-initial json file
• D. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > SystemUse the Product Documentation option

Answer: B

NEW QUESTION 4
Match each IDRAC Maintenance page tab to its description.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5
Which vSAN rules are configured for the VXRAIL-SYSTEM-STORAGE-PROFILE?

• A. Failures to tolerate - 2 failures RAID-1 (Mirroring) Object space reservation - Thin provisioning
• B. Failures to tolerate - 1 failure RAID-1 (Mirroring) Object space reservation - Thin provisioning
• C. Failures to tolerate - 1 failure RAID-1 (Mirroring) Object space reservation - Thick provisioning
• D. Failures to tolerate - 1 failure RAID-5 (Erasure Coding) Object space reservation - Thick provisioning

Answer: A

NEW QUESTION 6
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.
Use the VxRail simulator to describe why the host is Incompatible.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.

• A. bmc and bios are running older versions
• B. Insufficient number of vSphere licenses
• C. Firmware of ESXi host needs to be updated
• D. Invalid vCenter 5erver license

Answer: D

NEW QUESTION 7
A VxRail solution will be deployed with the embedded vCenter and an external DNS At a minimum, for which components must DNS records be created?

• A. vCenter Server Platform Services Controller, and iDRAC
• B. vCenter Server, ESXi hosts, and VxRail Manager
• C. vCenter Server Platform Services Controller, and VxRail Manager
• D. ESXi Hosts, VxRail Manager and iDRAC

Answer: B

NEW QUESTION 8
What Is a supported method for racking nodes for a new VxRail deployment?

• A. In the rack hosting the network equipment used to manage the iDRAC
• B. With PDUs connected to 120v single phase 5-amp electrical circuits
• C. Starting with node 1 at the top of the rack
• D. With server exhaust facing the cold aisle

Answer: A

NEW QUESTION 9
An implementation engineer is reviewing the customer requirements for a VxRail implementation The customer has specified noncontiguous hostnames and IP addresses
What option should the engineer select in the VxRail Deployment Wizard to input the hostnames and IP addresses?

• A. Autofill - with the correct incrementor
• B. Advanced
• C. Autofill - with the correct offset
• D. Custom

Answer: C

NEW QUESTION 10
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11
What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-5 (Erasure Coding)?

• A. 3
• B. 4
• C. 5
• D. 6

Answer: B

NEW QUESTION 12
What are the requirements for a customer-supplied VDS in a VxRail deployment?

• A. 4 or 8 uplinksPort groups for Discovery, Management, vMotion, and vSAN only
• B. 2 or 4 uplinksPort groups for Discovery, Management, vMotion, and vSAN only
• C. 2 or 4 uplinksPort groups for Discovery, Management vCenter Server, vMotion, and vSAN
• D. 4 or 8 uplinksPort groups for Discovery, Management, vCenter Server, vMotion, and vSAN

Answer: D

NEW QUESTION 13
From what environment must a network administrator run VxRail network validation?

• A. Windows PowerShell command prompt
• B. Same subnet as VxRail Management Network
• C. Top of Rack switches
• D. VxRail Deployment Wizard

Answer: C

NEW QUESTION 14
A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters.
What must be done?

• A. Migrate the internal vCenter Server to an external vCenter Server, then merge the PSC
• B. Upgrade the VxRail version from 4.7.xxx to 7.0.000
• C. Migrate the internal vCenter Server to an external vCenter Server, then upgrade the VxRail 4.7.xxx to 7.0.100
• D. Upgrade the internal vCenter Server to version 7.0

Answer: B

NEW QUESTION 15
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?

• A. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only
• B. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server
• C. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster
• D. Data-In-Transit Encryption: Addresses fear of media theftData-At-Rest Encryption: Addresses fear of rogue administrators

Answer: A

NEW QUESTION 16
An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches. Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?

• A. show network-policy profile
• B. show interface status
• C. show port-channel summary
• D. show interface

Answer: A

NEW QUESTION 17
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?

• A. Loudmouth
• B. Election
• C. Marvin
• D. Mystic

Answer: C

NEW QUESTION 18
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?

• A. External vCenter server must be upgraded after the VxRail is upgraded
• B. vCenter Server requires a temporary IP address on a different subnet before the upgrade
• C. Secure boot must be enabled on the ESXi hosts for a successful upgrade
• D. VxRail Manager VM must be changed to the default name to avoid an upgrade failure

Answer: A

NEW QUESTION 19
......