Replace HPE0-S56 Practice Exam 2021

NEW QUESTION 1
You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)

• A. Use out-of-band management with a dedicated management connection
• B. Use in-band management with an IP address and subnet mask that is reachable on the management network
• C. Use out-of-band management and keep the default settings
• D. Use in-band management and configure the AUX0 interface for scheme authentication

Answer: AB

NEW QUESTION 2
A customer is building out their rack of servers and storage systems. They need a high-performance network with a simple centralized management capability and deep buffer support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer’s needs?

• A. Aruba
• B. Altoline
• C. Arista
• D. FlexFabric

Answer: D

NEW QUESTION 3
A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system.
Which HPE product family will meet the customer’s needs?

• A. Altoline
• B. FlexFabric
• C. Arista
• D. Aruba

Answer: A

NEW QUESTION 4
You need to install 10 HPE ProLiant servers in an environment without DHCP. Which tool can you use to set up remote management?

• A. Intelligent Provisioning
• B. UEFI System Utilities
• C. Intelligent Management Center
• D. iLO 5 Configuration Utility

Answer: C

NEW QUESTION 5
Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

• A. Proactive Care 24x7
• B. Proactive Care 24x7 with CTR
• C. Foundation Care 24x7 with DMR
• D. Foundation Care 24x7

Answer: D

NEW QUESTION 6
You need to update the firmware on an MSL2024 to version 26.43.51. Which HPE utility do you need to use?

• A. OneView Standard
• B. Smart Storage Administrator
• C. Central Management Console
• D. Library & Tape Tools

Answer: D

NEW QUESTION 7
You are working on a server, and you notice that the blue UID light on the server is flashing slowly. What does this indicate?

• A. The host server is in standby mode
• B. The system is being managed remotely
• C. The host has rebooted and is performing POST actions
• D. The system is experiencing power issues

Answer: B

NEW QUESTION 8
A customer needs Layer 2 switches that provide basic functionality. In the future, this customer might need to use the switches’ CLI to configure VLAN and STP features.
Which category of the switches does meet the customer’s needs?

• A. unmanaged
• B. managed
• C. VLAN-based
• D. software distributed switch

Answer: B

NEW QUESTION 9
A customer needs to share files among their Microsoft Windows servers cost-effectively and requires disaster support
Which native StoreEasy features win address the customer's need? (select two) recovery

• A. Dual controller architecture
• B. DFS-Replication
• C. Microsoft Azure support
• D. Enhanced data deduplication
• E. File classification infrastructure

Answer: CD

NEW QUESTION 10
A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer’s requirements?

• A. Nimble CS1000
• B. Nimble SFA
• C. Nimble AF1000
• D. Nimble AF5000

Answer: B

NEW QUESTION 11
A customer needs to create a large RAID set for archive storage on large-capacity drives. Which RAID level is recommended for this customer?

• A. RAID 0
• B. RAID 5+0
• C. RAID 1+0
• D. RAID 6

Answer: D

NEW QUESTION 12
A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst
What should they implement within their backups software to minimize the network load on the remote site?

• A. source-side deduplication
• B. target-side deduplication
• C. thin provisioning
• D. native compression

Answer: A

NEW QUESTION 13
You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.
Which tool should you use?

• A. Insight Online
• B. InfoSight
• C. OS Event Viewer
• D. Integrated Management Log

Answer: A

NEW QUESTION 14
A customer needs to purchase a redundant pair of SAN switches for their virtualization environment. The customer requires a total of eight 16 Gbps FC storage ports and eighteen 8 Gbps FC host attachments.
Which switch meets the customer’s needs at the lowest cost?

• A. HPE StoreFabric SN6010C 48-port Switch
• B. HPE StoreFabric SN6010C 12-port Switch with an On Demand Port Activation License
• C. HPE 8/24 SAN Switch 16-port Switch with an 8-port Upgrade License
• D. HPE 8/24 SAN Switch 16-port Switch

Answer: B

NEW QUESTION 15
A customer needs to enable HPE Proactive Care and automated case creation for server hardware failures in their OneView environment.
Which step do you need to complete in OneView to accomplish these tasks?

• A. Enable remote support from the Settings page.
• B. Apply the OneView Advanced monitoring license.
• C. Add the hosts to the managed devices group.
• D. Configure proactive scan reports.

Answer: A

NEW QUESTION 16
You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests on local storage.
Which HPE tool should you use?

• A. iLO
• B. Intelligent Management Center
• C. Smart Storage Administrator
• D. OneView

Answer: B

NEW QUESTION 17
Which tool provides a report on the current usage levels and life span of some installed read-intensive flash drives?

• A. Central Management Console
• B. Integrated Management Log
• C. Intelligent Provisioning
• D. Smart Storage Administrator

Answer: D

NEW QUESTION 18
You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans constantly run at 100%. Which action should you take first?

• A. Update all system firmware
• B. Replace all cooling fans
• C. Reseat drive blanks
• D. Unplug all but one cooling fan

Answer: C

NEW QUESTION 19
A customer plans to use HPE ProLiant servers for an application that requires low latency for all components. Which workload profile should the customer use?

• A. Mission Critical
• B. Virtualization – Max Performance
• C. I/O Throughput
• D. Transactional Application Processing

Answer: A

NEW QUESTION 20
A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.
How should the customer configure their network?

• A. Isolate the management network from production traffic
• B. Isolate the SAN on a public network and use a virtual private network (VPN) for secure data
• C. Configure IRF on the switches
• D. Configure in-band management to manage the switches through gigabit Ethernet ports

Answer: A

NEW QUESTION 21
A customer needs a Layer 2 switch that provides basic switch functionality without the need to use a CLI or a GUI. Which type of switch meets the customer’s needs?

• A. smart web-managed
• B. managed
• C. unmanaged
• D. cloud-managed

Answer: C

NEW QUESTION 22
What can you do when installing an HPE switch to provide protection from electrostatic discharge?

• A. Install the switch in a rack with rubber insulators.
• B. Use a power surge protector.
• C. Load balance the power supplies.
• D. Connect the switch grounding cable correctly.

Answer: D

NEW QUESTION 23
A customer requires 12 Gb local storage for their VMware boot volumes, which require high-performance read cycles to enable the operating system to boot quickly.
Which drive type provides the most appropriate size and most cost-effective way to meet this requirement?

• A. Mixed-use SSD
• B. Flash media drive
• C. SATA nearline
• D. SAS midline

Answer: B

NEW QUESTION 24
......