Network-Appliance NS0-513 Preparation Labs 2021

NEW QUESTION 1
A customer is running clustered Data ONTAP and wants to restore 15 files from a secondary SnapVault destination. The customer uses the command snapmirror restore -file-list.
Which two statements are true about this operation? (Choose two.)

• A. The maximum number of files that you can select at the same time is one.
• B. The maximum number of files that you can select at the same time is eight.
• C. You can choose any destination volume for the restore, as long as the volume type is RW.
• D. You can choose any destination volume for the restore, as long as the volume type is DP.

Answer: BD

NEW QUESTION 2
A volume has been filled completely by active data and Snapshot copies. What must you do to make the volume writable again?

• A. Delete files in the active file system.
• B. Delete any SnapMirror relationships.
• C. Delete enough Snapshot copies until space is available.
• D. Modify the Snapshot reserve.

Answer: C

NEW QUESTION 3
Your customer wants to replicate data between two NetApp clusters in different data centers. Which two
actions must be performed to accomplish this task? (Choose two.)

• A. A peer relationship must be created between the two clusters.
• B. One inter-cluster LIF on each node must be configured.
• C. Every controller in both clusters must have at least one inter-cluster LIF configured.
• D. Every inter-cluster LIF must be configured on the same port with a data LIF.

Answer: AB

NEW QUESTION 4
You have a VMware VSphere environment with SRM and NetApp SRA fully configured. Which two statements are true?
(Choose two.)

• A. NetApp SRA supports both LUN attached and NFS mounted datastores.
• B. NetApp SRA supports the use of the FC protocol at one site and the iSCSI protocol at the other site.
• C. NetApp SRA supports the failover of SnapVault and SnapMirror relationships.
• D. NetApp clustered Data ONTAP supports a mixed ALUA configuration where some igroups have ALUA enabled and others do not.

Answer: AB

NEW QUESTION 5
You have downloaded a user-created OnCommandWorkFlow Automation (WFA) content pack from the NetApp communities Web site and want to import it into your environment.
Which two statements are true in this scenario? (Choose two.)

• A. The file must be imported through the WFA Web portal.
• B. You must unpack the zip file before importing it.
• C. The .exe file can be run directly on the WFA server.
• D. The .obj file can be placed directly in the content folder on the WFA server.

Answer: AC

NEW QUESTION 6
Click the Exhibit button.

Refer to the Exhibit. clusterA, clusterB, and clusterC are in a mirror-mirror cascade relationship. clusterB is offline and not recoverable. You want to continue to protect cluster

• A. In this scenario, which statement is correct?Response:
• B. Resume the relationship between clusterA and clusterC, creating a new baseline.
• C. clusterA will continue to be protected “as-is”.
• D. Synchronize the relationship between clusterA and clusterC, avoiding a new baseline.
• E. Create a SnapVault relationship between clusterB and clusterC.

Answer: C

NEW QUESTION 7
You are using SnapLock for SnapVault to protect Snapshot copies on secondary storage. In ONTAP 9.3, which source aggregate feature is supported in this scenario?

• A. SnapLock Enterprise
• B. SnapLock Compliance
• C. 32 bit
• D. RAID-TEC

Answer: D

NEW QUESTION 8
Your customer has issued the metrocluster heal command. Which two statements are true regarding this command?
(Choose two.)

• A. The customer has replaced failed disks in one of the cluster nodes.
• B. The customer has to run the command twice.
• C. The customer has one node in the site down and wants to heal the cluster.
• D. The customer is preparing for a disaster recovery switchback.

Answer: AD

NEW QUESTION 9
Your customer wants to implement a SnapVaultrelationship, but is concerned that the initial transfer will use up all of their network bandwidth. Which solution should you recommend to the customer?

• A. Use the SMTape functionality to back up the source volume to tape and use the tape to transfer the basesnapshot copy to the destination volume.
• B. Set up a SyncMirror relationship to a NetApp controller in the same data center, than ship the controller to the destination site.
• C. Manually copy each directory from the source volume to the destination volume during times when the network utilization is low.
• D. Enable volume efficiency on the destination volume.

Answer: A

NEW QUESTION 10
When creating a new workflow in OnCommand Workflow Automation, what is the correct order to apply commands in your new workflow?
Response:

• A. numerically 1-to-999
• B. left to right, top to bottom
• C. largest to smallest
• D. alphabetically A-to-Z

Answer: B

NEW QUESTION 11
You have a SnapVault backup from your primary site to your secondary site with a LUN in the volume. In this scenario, what is transferred?
Response:

• A. serial number
• B. UUID
• C. selected Snapshot copies
• D. LUN mapping status

Answer: C

NEW QUESTION 12
All of your CIFS file shares reside on a single NetApp volume. You are asked to ensure that your files are kept for seven days locally, and for 30 days off-site. What is the correct solution?

• A. Use SnapVoult locally for 7 days and use SnapMirror to a remote system for 30 days.
• B. Use SnapMirror locally for 7 days and use SnapMirror to a remote system for 30 days.
• C. Use SnapVoult locally for 7 days and use Snapshot to a remote system for 30 days.
• D. Use Snapshot locally for 7 days and use SnapVault to a remote system for 30 days.

Answer: A

NEW QUESTION 13
You want to perform a health check of the MetroCluster synchronization status. Which two actions should you perform?
(Choose two.)

• A. Run the MetroCluster Health Check tool from your administration host.
• B. On the cluster shell, use the metrocluster replication show command.
• C. In On Command System Manager, go to the Cluster in the Metro Cluster section.
• D. On the cluster shell, use the metrocluster check run command.
• E. In On Command Unified Manager, go to the Cluster in the MetroCluster tab.

Answer: BE

NEW QUESTION 14
You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space. Which three actions are available to perform from the OCUM events detail Web page?
(Choose three.)

• A. Acknowledge the event.
• B. Mark the event as "resolved".
• C. Create a job to move the FlexVol.
• D. Increase the capacity of the FlexVol.
• E. Add a note to the event.

Answer: ABE

NEW QUESTION 15
Which clustered Data ONTAP technology replicates only the changed blocks of a volume for pointin- time restores?

• A. NDMP copy
• B. FlexClone volume clone
• C. Snapshot copies
• D. SnapVault replication

Answer: C

NEW QUESTION 16
You must determine if there have been any backup problems overnight. Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information?
(Choose two.)

• A. Unresolved Incidents and Risks area
• B. On Command Unified Manager Dashboard
• C. On Command Cluster Events Details
• D. On Command Job Events Details

Answer: BD

NEW QUESTION 17
A customer is running clustered Data ONTAP on primary and secondary clusters. The customer is using SnapVault to back up volumes between the clusters.
The customer has good Data ONTAP 7-Mode knowledge and needs to set up two new SnapVault relationships between the clusters on a weekly schedule.
Which solution would you recommend to satisfy this requirement?

• A. Use the node shell command line interface.
• B. Use the system shell command line interface.
• C. Use OnCommand Workflow Automation.
• D. Use OnCommand System Manager.

Answer: D

NEW QUESTION 18
You want to replicate data from ONTAP to NetApp Cloud Backup (formerly AltaVault).
To prevent a conflict with another backup application, you need to update the policy that contains the backup schedule so that the backup runs at a different time of day.
Which product would accomplish this task?
Response:

• A. OnCommand Unified Manager
• B. OnCommand System Manager
• C. OnCommand Insight
• D. Commvault IntelliSnap

Answer: B

NEW QUESTION 19
You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?

• A. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN.
• B. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.
• C. Use SnapManager for Oracle to take the Snapshot copy backup.
• D. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.

Answer: B

NEW QUESTION 20
Which attribute does Data ONTAP use the identify Snapshot copies between primary and secondary FlexVol volumes in a SnapVault relationship?

• A. FlexVol name
• B. Snapshot prefix
• C. SnapMirror policy
• D. SnapMirror label

Answer: D

NEW QUESTION 21
You configured a SnapMirror relationship with a default policy for the daily mirroring of a volume which contains financial data. Although the data is critical, it only changes on a monthly basis.
Using On Command System Manager, which two actions would change the frequency of the SnapMirror updates?(Choose two.)

• A. Select or create a different schedule.
• B. Edit the parameters of the default schedule.
• C. Select or create a different policy.
• D. Edit the parameters of the default policy.

Answer: CD

NEW QUESTION 22
......