Replace 201 Free Practice Exam For TMOS Administration Certification
We provide real 201 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass F5-Networks 201 Exam quickly & easily. The 201 PDF type is available for reading and printing. You can print more and practice many times. With the help of our F5-Networks 201 dumps pdf and vce product and material, you can easily pass the 201 exam.
F5-Networks 201 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?
- A. Create a new VLAN object and set Customer Tag to 120
- B. Create a new VLAN object and assign the interface 1.1 untagged
- C. Create a new trunk object with interface 1.1 assigned
- D. Create a new trunk object and assign it to the VLAN
Answer: B
NEW QUESTION 2
A BIG-IP Administrator finds the following log entry:
tnm tmm[7141]: 011e0002:4: sweeperjjpdate: aggressive mode activated. Which action should the BIG-IP Administrator to mitigate this memory issue?
- A. Configure the redundant par to be active-active
- B. Decrease the TCP profile ide Timeout value
- C. increase the TCP profile ide Timeout value
- D. Configure the serve to use Connection Mirroring
Answer: D
NEW QUESTION 3
A standard virtual server has been associated with a pool with multiple members. Assuming all other settings are left at their defaults, which statement is always true concerning traffic processed by the virtual server?
- A. The client IP address is unchanged between the client side connection and the serverside connection.
- B. The server IP address is unchanged between the client side connection and the serverside connection.
- C. The TCP ports used in the client side connection are the same as the TCP ports serverside connection.
- D. The IP addresses used in the clientside connection are the same as the IP addresses used in the serverside connection.
Answer: A
NEW QUESTION 4
A BIG-IP Administrator creates an HTTP Virtual Server using an iApp template. After the Virtual Server is created, the user requests to change the destination IP addresses. The BIG-IP Administrator tries to change the destination IP address from 10.1.1.1 to 10.2.1.1 in Virtual Server settings, but receives the following error:
The application service must be updated using an application management interface What is causing this error?
- A. The Application Service was NOT deleted before making the IP address change.
- B. The IP addresses are already in use.
- C. The Application Services have Strict Updates enabled.
- D. The IP addresses used are NOT from the same subnet as the Self IP.
Answer: C
Explanation:
Strict Updates : Indicates whether the application service is tied to the template, so when the template is updated, the application service changes to reflect the updates.
NEW QUESTION 5
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool is marked available. If a pool is marked available (green) which situation is sufficient to cause this?
- A. All of the pool member nodes are responding to the ICMP monitor as expected.
- B. Less than 50% of the pool member nodes responded to the ICMP echo request.
- C. All of the members of the pool have had their content updated recently and their responses no longer match the monitor.
- D. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monito
- E. The other respond as expected.
Answer: D
NEW QUESTION 6
Refer to the exhibit.
A BIG-IP Administrator configures the Virtual Server to pass HTTP traffic. Users report that they are unable to access the application
What should the administrator do to resolve this issue?
- A. Change the Virtual Server name
- B. Disable .he State
- C. Reconfigure the Source Address
- D. Reconfigure the Pool Members
Answer: D
NEW QUESTION 7
A BIG-IP Administrator suspects that one of the BIG-IP device power supplies is experiencing power outages.
Which log file should the BIG-IP Administrator check to verify the suspicion?
- A. /war /log/daemon.log
- B. /var/log/kern.log
- C. /var/log/ltm
- D. /var/log/audit
Answer: C
NEW QUESTION 8
A BIG-IP Administrator has configured a BIG-IP cluster with remote user authentication against dcOl f5trn.com. Only local users can successfully log into the system. Configsync is also failing.
Which two tools should the 8IG-IP Administrator use to further investigate these issues? (Choose two)
- A. ntpq
- B. pam_timestamp_check
- C. passwd
- D. pwck
- E. dig
Answer: AC
NEW QUESTION 9
Refer to the exhibit.
A BIG-IP Administrator configures a now VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device.
Which VLAN setting should be changed to prevent this issue?
- A. Auto Last Hop
- B. Fail-safe
- C. Customer Tag
- D. Source Check
Answer: B
NEW QUESTION 10
A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.
Which two tools could the administrator leverage to verify known issues for the target versions? (Choose two.)
- A. F5 University
- B. F5 Downloads
- C. F5 End User Diagnostics (EUD)
- D. FSiHealth
- E. F5 Bug Tracker
Answer: DE
Explanation:
F5 University -- F5 learning materials F5 Downloads - iso download page
F5 End User Diagnostics (EUD) -- Hardware detection
NEW QUESTION 11
A BIG-IP Administrator needs to find which modules have been licensed for use on the BIG-IP system. In which section of the Configuration Utility can the BIG-IP Administrator find this information?
- A. System > Services
- B. System > Resource Provisioning
- C. System > Platform
- D. System > Support
Answer: B
NEW QUESTION 12
A BIG-IP Administrator plans to resolve a non-critical issue with a BIG-IP device in 2 weeks. What Severity level should be assigned to this type of F5 support ticket?
- A. 4
- B. 2
- C. 3
- D. 1
Answer: A
NEW QUESTION 13
A BIG-IP Administrator needs to have a BIG-IP linked to two upstream switches for resilience of the external network. The network engineer who is going to configure the switch instructs the BIG-IP Administrator to configure interface binding with LACP. Which configuration should the administrator use?
- A. A virtual server with an LACP profile and the switches' management IPs as pool members.
- B. A virtual server with an LACP profile and the interfaces connected to the switches as pool members.
- C. A Trunk listing the allowed VLAN IDs and MAC addresses configured on the switches.
- D. A Trunk containing an interface connected to each switch.
Answer: D
NEW QUESTION 14
A BIG-IP Administrator is setting up a new BIG-IP device. The network administrator reports that the interface has an incompatible media speed. The BIG-IP Administrator needs to change this setting
manually.
From which location should the BIG-IP Administrator perform this task?
- A. On the Front Console
- B. In the TMOS Shell Command line
- C. In the Configuration Utility, Network > Interface
- D. In the Configuration Utility, System > Configuration
Answer: C
NEW QUESTION 15
The BIG-IP Administrator disable all pool members in a pool Users are still able to reach the pool members.
What is allowing users to continue to reach the disabled poo! members?
- A. A slow to time on Pool
- B. A persistence profile on the Virtual Server
- C. A slow ramp time on virtual Server
- D. A persistence profile on the Pool
Answer: B
NEW QUESTION 16
......
P.S. Dumps-hub.com now are offering 100% pass ensure 201 dumps! All 201 exam questions have been updated with correct answers: https://www.dumps-hub.com/201-dumps.html (254 New Questions)