Regenerate 2V0-41.20 Free Practice Test For Professional VMware NSX-T Data Center Certification

NEW QUESTION 1
Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

• A. SNAT
• B. Reverse NAT
• C. DNAT
• D. 1:1 NAT

Answer: A

NEW QUESTION 2
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)

• A. can have a maximum of 8 edge nodes
• B. must have only active-active edge nodes
• C. can have a maximum of 10 edge nodes
• D. can contain multiple types of edge nodes (VM or bare metal)
• E. must contain only one type of edge nodes (VM or bare metal)

Answer: CD

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0

NEW QUESTION 3
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?

• A. 5
• B. 6
• C. 3
• D. 4

Answer: D

NEW QUESTION 4
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)

• A. stateful services leveraged
• B. Failover of services
• C. traffic predictability
• D. traffic load balancing
• E. increased north/south bandwidth

Answer: DE

Explanation:
From ICM manual:
Equal-cost multipath (ECMP) routing has several features and functions:
• ECMP routing increases the north-south communication bandwidth by combining multiple uplinks.
• ECMP routing performs traffic load balancing.
• ECMP routing provides fault tolerance for failed paths.
• A maximum of eight ECMP paths are supported.
• Hashing is based on 2-tuple IP source and destination addresses.
• ECMP routing is only available on Tier-0 gateways.

NEW QUESTION 5
An NSX administrator would like to configure syslog for a KVM transport node. Which host log files could be exported to a remote syslog server?

• A. /var/log/vmware/nsx-syslog
• B. /var/log/cfgAgent.log
• C. /var/log/nsx-audit.log
• D. /var/log/cloudnet/nsx-ccp.log

Answer: A

NEW QUESTION 6
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image. Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?

• A. e1000
• B. VMXNET2
• C. VMXNET3
• D. Flexible

Answer: C

NEW QUESTION 7
Which is correct when deploying a NSX Edge in a KVM only environment?

• A. deploy NSX Edge VM with QCOW2 image
• B. deploy NSX Edge VM with ISO image
• C. deploy NSX Edge on a bare-metal server
• D. deploy NSX Edge VM with OVF template

Answer: C

NEW QUESTION 8
Which three services are compatible with VRF Lite? (Choose three.)

• A. VPN
• B. Intrusion Detection
• C. NAT
• D. Load Balancer
• E. DHCP

Answer: BCE

Explanation:
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.

NEW QUESTION 9
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing. Which failover detection protocol must be used to meet this requirement?

• A. Beacon Probing (BP)
• B. Host Standby Router Protocol (HSRP)
• C. Bidirectional Forwarding Detection (BFD)
• D. Virtual Router Redundancy Protocol (VRRP)

Answer: C

NEW QUESTION 10
What are three characteristics of a transport zone? (Choose three.)

• A. defines the potential reach of transport nodes
• B. configured with a Single N-VDS
• C. defines the scope and reachability of a Segment
• D. configured with multiple N-VDS
• E. optional for creating a segment

Answer: ABC

NEW QUESTION 11
Which statement describes the VMware Virtual Cloud Network Vision?

• A. Virtual Cloud Network connects and protects virtual machines running in KVM environments.
• B. Virtual Cloud Network connects and protects virtual machines running in vSphere environments.
• C. Virtual Cloud Network connects and protects applications, regardless of their physical locations.
• D. Virtual Cloud Network connects and protects applications and data, regardless of their physical locations.

Answer: D

NEW QUESTION 12
Which three can an administrator define in a transport node profile? (Choose three.)

• A. Logical Router
• B. Segment Profile
• C. Segment
• D. Uplink Profile
• E. VDS switch configuration
• F. N-VDS switch configuration

Answer: DEF

NEW QUESTION 13
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center. What is the minimum MTU size for the UPLINK profile?

• A. 1500
• B. 1650
• C. 1550
• D. 1600

Answer: D

NEW QUESTION 14
Which discovery protocol is supported for hypervisor transport nodes?

• A. Adobe Real-time CDP
• B. Neighbor Discovery Protocol
• C. Cisco Discovery Protocol
• D. Link Layer Discovery Protocol

Answer: D

NEW QUESTION 15
Which two choices are solutions of the NSX portfolio (Choose two.)?

• A. vRealize Automation
• B. NSX Distributed IDS/IPS
• C. vRealize Network Insight
• D. Tanzu Kubernetes Grid
• E. NSX Service Mesh

Answer: BE

NEW QUESTION 16
When running nsxcli on an ESXi host, which command will show the Replication mode?

• A. get logical-switch <Local-Switch-UUID> status
• B. get logical-switch <Logical-Switch-UUID>
• C. get logical-switches
• D. get logical-switch status

Answer: B

Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264

NEW QUESTION 17
Which statement Is true regarding the audit user account? (Choose two.)

• A. The admin user must set the password for the audit account to log in to NSX Manager.
• B. The administrator must run the set audit user password <password> command.
• C. The audit user has read-write access to the NSX Manager.
• D. The audit user is disabled by default and must be enabled to log in to the NSX Manager.
• E. The administrator must run the set user audit password <password> command.

Answer: AE

NEW QUESTION 18
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

• A. Automatically created when Tier-1 is created.
• B. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
• C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
• D. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-B

NEW QUESTION 19
Where are Distributed Firewall logs containing access decisions stored?

• A. NSX API
• B. NSX Edge
• C. NSX Manager
• D. Hypervisor transport node

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6 https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A

NEW QUESTION 20
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)

• A. Create an IPsec service.
• B. Add a local endpoint.
• C. Configure an IPsec session.
• D. Configure a distributed firewall policy.
• E. Add a logical switch.

Answer: ABC

NEW QUESTION 21
Which three different transport nodes could be configured in the data plane? (Choose three.)

• A. vShield Edge VM
• B. ESXi and KVM
• C. Bare Metal server
• D. NSX Edge VM on KVM
• E. ESXi and Hyper-V
• F. VM or Bare Metal NSX Edge

Answer: BCF

NEW QUESTION 22
......