Precise Cisco 300-610 Free Practice Exam Online

NEW QUESTION 1
What influences the number of ISLs that are required between Cisco MDS Series switches?

• A. FCoE protocol
• B. type of storage
• C. end-to-end oversubscription ratio
• D. N Port virtualization

Answer: C

NEW QUESTION 2
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

• A. NPIV mode
• B. FC end-host mode
• C. NPV mode
• D. FC switching mode

Answer: D

Explanation:
Section: Storage Network Design

NEW QUESTION 3
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)

• A. type
• B. preshared key
• C. port number
• D. identifying tag
• E. hostname

Answer: CE

NEW QUESTION 4
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

• A. WWPN
• B. EUI
• C. IQN
• D. WWN
• E. OUI

Answer: CD

NEW QUESTION 5
Where does Cisco UCS handle Fibre Channel traffic failover?

• A. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
• B. on the host, by using multipathing software
• C. in the hardware on the Cisco UCS VIC 12xx adapter or later
• D. in the hardware on any Cisco UCS VIC adapter

Answer: B

NEW QUESTION 6
Drag and drop the configurations from the left onto the correct policies on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 7
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)

• A. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
• B. STP runs on the uplink ports of each VLAN, as defined by MSTP.
• C. The STP parameter configuration is unsupported.
• D. The STP parameter configuration is supported.
• E. STP runs on the server ports.

Answer: AC

NEW QUESTION 8
What is an advantage of using OTV as compared to VPLS for data center redundancy?

• A. prevents loops on point-to-point links
• B. provides head-end replication
• C. uses a proactive MAC advertisement
• D. provides full-mesh connectivity

Answer: A

NEW QUESTION 9
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?

• A. vPC
• B. virtual interface
• C. port channel
• D. physical port

Answer: B

NEW QUESTION 10
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

• A. Cisco Intersight automatically creates an invisible cloud witness.
• B. Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
• C. Cisco UCS Manager provides service profile portability across nodes.
• D. Cisco HyperFlex Edge provides native container support through the KVM hypervisor.

Answer: A

NEW QUESTION 11
Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?

• A. 9000 bytes
• B. 2000 bytes
• C. 2158 bytes
• D. 2240 bytes

Answer: B

NEW QUESTION 12
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

• A. IP redirects
• B. flow control
• C. proxy ARP
• D. HSRP

Answer: C

NEW QUESTION 13
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

• A. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
• B. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
• C. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
• D. 8-Gbps links and 10-Gbps links use 64B/66B encoding.

Answer: B

NEW QUESTION 14
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?

• A. NX-API
• B. Postman
• C. Bash shell
• D. Guest shell

Answer: A

NEW QUESTION 15
Which two types of service profile templates does Cisco UCS support? (Choose two.)

• A. initial
• B. permanent
• C. updating
• D. temporary
• E. connected

Answer: AC

NEW QUESTION 16
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)

• A. HA
• B. VSS
• C. FT
• D. VDP
• E. DRS

Answer: AE

NEW QUESTION 17
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 18
Which orchestration tool should be used for the management and analytics of servers across multiple sites?

• A. Cisco Intersight
• B. Cisco Nexus Fabric Manager
• C. Cisco UCS Manager
• D. Cisco Data Center Network Manager

Answer: A

NEW QUESTION 19
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

• A. vPC+
• B. E-Trunk
• C. SAN port channel
• D. LACP port channel

Answer: D

NEW QUESTION 20
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 21
Which two configurations allow for routing traffic between two VDCs? (Choose two.)

• A. Connect the VDCs to an external Layer 3 device.
• B. Cross-connect the ports between the VDCs.
• C. Create VRF-aware software infrastructure interfaces.
• D. Create a policy map in the default VDC that routes traffic between the VDCs.
• E. Create interfaces in the VDC that can be accessed by another VDC.

Answer: AD

NEW QUESTION 22
Refer to the exhibit.

An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)

• A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
• B. NPV feature on the Cisco MDS Series.
• C. end-host mode feature on the Cisco UCS Fabric Interconnects
• D. NPIV feature on the Cisco MDS Series
• E. Smart Zoning feature on the Cisco UCS Fabric Interconnects

Answer: BD

NEW QUESTION 23
Which two methods mitigate congestion in a SAN network? (Choose two.)

• A. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
• B. Use the port-monitor command to detect slow drain devices.
• C. Configure the port channel to enable individual buffer-to-buffer credits.
• D. Configure the port monitor to allow categorization of a specific device as slow.
• E. Configure the flow control for the FC to use R_RDY.

Answer: BD

NEW QUESTION 24
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

• A. Cisco UCS Manager creates two separate fabric port channels.
• B. Cisco UCS Manager creates a single fabric port channel.
• C. The port channel is disabled until an administrator enables it manually.
• D. Each uplink that connects an IOM is configured as a discrete link.

Answer: A

NEW QUESTION 25
......