A Review Of Free 350-501 Real Exam
we provide Approved Cisco 350-501 exam prep which are the best for clearing 350-501 test, and to get certified by Cisco Implementing and Operating Cisco Service Provider Network Core Technologies. The 350-501 Questions & Answers covers all the knowledge points of the real 350-501 exam. Crack your Cisco 350-501 Exam with latest dumps, guaranteed!
Online Cisco 350-501 free dumps demo Below:
NEW QUESTION 1
Refer to the exhibit Which effect of this configuration is true?
- A. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.
- B. R1can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer.
- C. R1 can failover to any peer.
- D. R1 can failover only to a peer that is configured for LDF SSO/NSF.
Answer: A
NEW QUESTION 2
Refer to the exhibit. Which purpose of implementing NSF with this configuration is true?
- A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up.
- B. The router uses NSF to reduce neighbor-relationship downtime during RP switchover.
- C. The router uses NSF to load balance traffic on a routed EtherChannel.
- D. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds.
Answer: A
NEW QUESTION 3
Refer to the exhibit. Export statistics received do not include the BGP next hop. Which statement about the NetFlow export statistics is true?
- A. Loopback 0 must be participating in BGP for it to be included in the export statistics.
- B. To include the BGP next hop in the export statistics, those keywords must be included with the version 9 entry.
- C. The origin AS and the peer-as will be included in the export statistics.
- D. Only the origin AS of the source router will be included in the export statistics.
Answer: B
NEW QUESTION 4
DRAG DROP
Drag and drop each NAT64 description from the left onto the correct NAT64 type on the right.
Select and Place:
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 5
Refer to the exhibits. R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2. R1 generates the above log message periodically. Based on this output, which statement is true?
- A. IS-IS neighbor authentication is failing for Level 2 PDUs only.
- B. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs.
- C. IS-IS neighbor authentication is failing for Level 1 and Level 2 PDUs.
- D. IS-IS neighbor authentication is failing for Level 1 PDUs only.
Answer: D
NEW QUESTION 6
Refer to the exhibit. Which effect of this configuration is true?
- A. It enables MPLS on the interface.
- B. It creates a pseudowire class named cisco.
- C. It enables AToM on interface gigabitethernet1/0.
- D. It enables tagging for VLAN 12 on the interface.
Answer: C
NEW QUESTION 7
How can shared services in an MPLS Layer 3 VPN provide Internet access to the Customers of a central service provider?
- A. Static routes on CE routers allow route leakage from a PE global routing table.
- B. The CE router can establish a BGP peering to a PE router and use the PE device to reach the Internet.
- C. The customer VRF uses route targets to import and export routes to and from a shared services VRF.
- D. Route distinguishers are used to identify the routes that CEs can use to reach the Internet.
Answer: C
NEW QUESTION 8
Refer to the exhibit. Which statement supports QPPB implementation?
- A. QPPB policies affect only egress traffic.
- B. QoS policies rely exclusively on BGP attributes to manipulate traffic.
- C. QoS policies are identified in the MPLS forwarding table.
- D. QoS policies use BGP to gain full coverage on the network.
Answer: D
NEW QUESTION 9
Refer to the exhibit. What does this value mean when it is received in XML?
- A. It indicates a value assigned by a network administrator to tag a route.
- B. It indicates a break in a sequence.
- C. It means a data field is blank.
- D. It shows the ending of the script.
Answer: D
NEW QUESTION 10
An engineer working for telecommunication company needs to secure the LAN network using a prefix list.
Which best practice should the engineer follow when he implements a prefix list?
- A. An engineer must identify the prefix list with a number only.
- B. The final entry in a prefix list must be /32.
- C. An engineer must include only the prefixes for which he needs to log activity.
- D. An engineer must use nonsequential sequence numbers in the prefix list so that he can insert additional entries later.
Answer: D
NEW QUESTION 11
While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.
After you issue this command, which BGP packets does the PE accept?
- A. to 2.2.2.2, with a TTL of 2 or more
- B. from 2.2.2.2, with a TTL of less than 2
- C. to 2.2.2.2, with a TTL of less than 253
- D. from 2.2.2.2, with a TTL of 253 or more
Answer: D
NEW QUESTION 12
How can a network administrator secure rest APIs?
- A. They can have a general administrator login for multiple users to access that has command entries logged.
- B. They can authenticate user sessions and provide the appropriate privilege level.
- C. They can ensure that user sessions are authenticated using TACACS+ only.
- D. They can allow read and write privileges to all users.
Answer: B
NEW QUESTION 13
Which statement about Network Services Orchestrator (NSO) is true?
- A. It must use SDN as an overlay for addressing.
- B. It uses YANG modeling language to automate devices.
- C. It is used only in service provider environments.
- D. It can be used only with XML coding.
Answer: B
NEW QUESTION 14
You are writing an RPL script to accept routes only from certain autonomous systems. Consider this code:
RP/0/RP0/CPU0:router(config-rpl)# if as-path in (ios-regex ‘.*77$’) RP/0/RP0/CPU0:router(config-rpl-if)# pass RP/0/RP0/CPU0:router(config-rpl-if)# endif
If you apply this code to BGP filters, which effect does the code have on your router?
- A. denies routes from AS 7070
- B. allows routes from AS 7077
- C. denies routes from AS 7007
- D. allows routes from AS 770
Answer: B
NEW QUESTION 15
Refer to the exhibit. This output is included at the end of an output that was provided by a device using NETCONF. What does the code show?
- A. It shows that the full configuration is being modeled by YANG.
- B. It shows NETCONF uses remote procedure calls.
- C. It shows the hostname of the device as rpc-reply.
- D. It shows that the running configuration is blank.
Answer: B
NEW QUESTION 16
You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two.)
- A. The dynamic path option is supported only with IS-IS.
- B. Tunnels can be configured with dynamic path or explicitly defined path.
- C. A zero bandwidth tunnel is not a valid option.
- D. The bandwidth statement creates a “hard” reservation on the link.
- E. Tunnel links inherit IGP metrics by default unless overridden.
Answer: BE
NEW QUESTION 17
Which BGP attribute is used first when determining the best path?
- A. origin
- B. AS path
- C. local preference
- D. weight
Answer: D
NEW QUESTION 18
Refer to the exhibit. If router A is the RP, which PIM mode can you configure so that devices will send multicast traffic toward the RP?
- A. PIM-SM
- B. BIDIR-PIM
- C. PIM-SSM
- D. PIM-DM
Answer: A
NEW QUESTION 19
Refer to the exhibit. A network engineer is implementing a BGP routing policy. Which effect of this configuration is true?
- A. All traffic that matches acl10 is allowed without any change to its local-preference.
- B. All traffic that matches acl10 is dropped without any change to its local-preference.
- C. If traffic matches acl10, it is allowed and its local-preference is set to 300.
- D. All traffic is assigned a local-preference of 300 regardless of its destination.
Answer: A
NEW QUESTION 20
Refer to the exhibit. On R1, which output does the show isis neighbors command generate?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION 21
Which component is similar to an EVPN instance?
- A. router distinguisher
- B. MPLS label
- C. IGP router ID
- D. VRF
Answer: D
NEW QUESTION 22
Which statement about segment routing prefix segments is true?
- A. It is the longest path to a node.
- B. It is linked to an adjacency SID that is globally unique within the router.
- C. It is linked to a prefix SID that is globally unique within segment routing domain.
- D. It requires using EIGRP to operate.
Answer: C
NEW QUESTION 23
Which service is a VNF role?
- A. Network
- B. Firewall
- C. Storage
- D. Compute
Answer: A
NEW QUESTION 24
......
P.S. Easily pass 350-501 Exam with 102 Q&As Dumps-hub.com Dumps & pdf Version, Welcome to Download the Newest Dumps-hub.com 350-501 Dumps: https://www.dumps-hub.com/350-501-dumps.html (102 New Questions)