Precise 70-740 Free Samples 2021

NEW QUESTION 1
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From the Security setting of each zone on Server1, you modify the permissions Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 2
HOTSPOT
Your network contains an Active Directory forest. The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:

DC1 fails.
You remove DC1 from the network, and then you run the following command:

For each of the following statements, select Yes if the statement if true. Otherwise, select No.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 3
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration You need to configure Active Directory to support the planned deployment. Solution You raise the domain functional level to Windows Server 2012R2.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 4
You have a server named Server1 that runs Windows Server 2021. Server1 has the Containers feature installed.
You create a text file that contains the commands that will be used to automate the creation of new containers.
You need to ensure that the commands in the text file are used when you create new containers. What should you name the file?

• A. Bootstrap.ini
• B. Config.ini
• C. Dockerfile
• D. Unattend.txt

Answer: C

NEW QUESTION 5
Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

• A. RunNew-SRPartnershipand specify the -RephcationModeparameter.
• B. install the Failover Clustering feature and create a new cluster resource group.
• C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
• D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter

Answer: A

NEW QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Exchange Server 2021 organization.
Some users access the mailbox on their mobile device by using Exchange ActiveSync.
You need to prevent the users from synchronizing more than one month of email or calendar data to their device.
Solution: You deploy an Allow/Block/Quarantine policy. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 7
HOTSPOT
You have a Hyper-V host named Serverl that runs Windows Server 2021 Datacenter. Serverl is activated.
On Server 1. you deploy a virtual machine named VM1 that has a Server Core installahon of Windows Server 2021 Standard.
You need to activate VMI try using Automatic Virtual Machine- Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8
HOTSPOT
You have a Windows Server 2021 failover cluster that has a cluster network named ClusterNetwork1. You need to ensure that ClusterNetwork1 is enabled for cluster communication only.
What command should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 9
Nano Server is foundational to the modern datacenter and is useful in two core scenarios: As a private cloud infrastructure it's particularly useful for clustered Hyper-V, clustered storage and core networking services scenarios; or as an application platform it's highly optimized for modern distributed and cloud-based apps which leverage containers and micro service architectures.
Is the following statement TRUE or FALSE?
A local interface with UI support is available for offline management of Nano Servers?

• A. TRUE
• B. FALSE

Answer: B

Explanation:
A local interface with UI support is NOT available for Nano servers. You must administer them remotely using PowerShell.

NEW QUESTION 10
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have multiple local disks attached.
You need to create a storage pool by using Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/deploy-storage-spaces-direct

NEW QUESTION 11
HOTSPOT
Your network contains an Active Directory forest The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole PDCEmulator Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole RIDMaster DC1 fails.
You remove DC1 from the network, and then you run the following command:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole SchemaMaster For each of the following statements, select Yes if the statement is true. Otherwise, select No

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 12
HOTSPOT
You have a server named Server1 that runs Windows Server 2021.
On Server1, you plan to create a new volume named Volume1. Volume1 will contain image files.
You need to identify which file system and which cluster size to configure for Volume1. The solution must ensure that the image files will be compressed by using file system compression.
Which file system and cluster size should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 13
Your network contains an Active Directory domain named contoso.com. The domain contains two servers, Server and Server2 that run Windows Sewer 2021.
Each server has an operating system disk and four data disks. All of the disks are locally attached SATA disks. Data disk, is initialized as an MBR disk, and has a single NITS volume.
You plan to implement Storage Spaces Direct by using the data disks on Server1 and Server2. You need to prepare the data disks for the Storage Spaces Direct implementation.
What should you do?

• A. Convert the data disks to dynamic disks.
• B. Format the volumes on the data disks as exFAT.
• C. Initialize the data disks as GPT disks and create an ReFS volume on each disk.
• D. Delete the volumes from the data disks.

Answer: D

NEW QUESTION 14
You have a Windows Server 2021 fail over cluster named that contains four nodes named Server 1, Server2. Server3. sod Seiver4. Cluster1 hosts 40 virtual machines that are distributed evenly across the nodes.
Server 1 and Server2 are located in a data center in Madrid. Server1 and Server4 are located In a d.ita center in Barcelona.
You need lo entire that when you pause a node, the clustered virtual machines will always attempt to move automatically to another node in the same data center before attempting to move to a node In the other data center.
Which two actions should you perform?
Each correct answer present part of the solution.

• A. Run the New-ClusterFaultDomain cmdlel.
• B. Configure a file share witness for each data center.
• C. Orate on Active Directory site for cacti data center.
• D. Run the Set-Cluster FaultDomain cmdlet.
• E. Run the Add-ClusterGroup cmdlet.
• F. Change the quorum configuration of the cluster to Node Majority.

Answer: CE

NEW QUESTION 15
Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2021 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
• Deploy failover cluster to two new virtual machines.
• Store all application databases by using Encrypted File System (EFS).
• Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine. Which command should you run?

• A. Create a firewall rule 10 allow TCP port 443.
• B. Create a firewall rule to allow TCP port 8531.
• C. Require- SSI Oil the Client WebService virtual directory.
• D. Require SSI on the Inventory virtual directory.

Answer: D

NEW QUESTION 16
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 contains four virtual machines that are configured as shown in the following table.

To which machine or machines can you connect by using Virtual Machine Connection from Hyper-V Manager?

• A. VM1, VM2, VM3 and VM4
• B. VM4 only
• C. VM1 and VM2 only
• D. VM3 and VM4 only
• E. VM2 only

Answer: D

NEW QUESTION 17
You have a Nano Server named Nano1.
Nano1 is configured to perform real-time protection scans by using Windows Defender.
You need to ensure that all of the files located in D:App1Data are excluded from the real-time protection
scans.
What should you do?

• A. From the properties of D:App1Data folder, modify the permissions.
• B. Run the Set-MpPreference cmdlet and specify the –ExclusionPath parameter.
• C. From a command prompt, run the attrib command and specify the –s parameter.
• D. Run the Get-ChildItem cmdlet and specify the –Exclude parameter.

Answer: B

NEW QUESTION 18
You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is distributed evenly among the virtual machines that host App1 What should you include in the environment?

• A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
• B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
• C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
• D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

Answer: D

NEW QUESTION 19
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021.
You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You mount the volume to C:Backup, and you format the volume by using FAT32. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 20
You have a server named Server1 that runs Windows Server 2021 and is configured as a domain controller.
You install the DNS Server server role on Server1.
You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use?

• A. Set-DnsServer
• B. Active Directory Sites and Services
• C. Dns.exe
• D. Dnscmd.exe

Answer: D

Explanation:
https://technet.microsoft.com/en-us/library/ee649181(v=ws.10).aspx

NEW QUESTION 21
Your IT company is constantly changing, with new users coming and going throughout the year.
One of your common tasks requires the deletion of user accounts for employees who have left the company.
Which command can be used to delete user accounts?

• A. LDIFDE
• B. Dsmod
• C. Dspromo
• D. Netsh

Answer: A

NEW QUESTION 22
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1,
vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?

• A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
• B. From Hyper-V Manager on Server1, modify the settings on VM1.
• C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
• D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

Answer: D

Explanation:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/nic-teaming/nic-teaming

NEW QUESTION 23
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 Server1 is a Hyper-V host
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA) - capable.
You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards
Which command should you run first? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 24
You want to boot a Linux Operating System with the Secure Boot option enabled in a virtual machine.
This will be the first time you boot the OS. What must you do?

• A. Set the -BootOrder to HardDiskDrive
• B. Configure the virtual machine to use the Microsoft UEFI Certificate Authority
• C. You can't enable Secure Boot with Linux
• D. Set -EnableSecureBoot without specifying a template

Answer: B

Explanation:
Linux operating systems running on newer generation virtual machines can boot with the Secure Boot option enabled. Before you boot the virtual machine for the first time, you must configure the virtual machine to use the Microsoft UEFI Certificate Authority. You can do this from Hyper-V Manager, Virtual Machine Manager, or an elevated Windows Powershell session.

NEW QUESTION 25
Note: This question is part of a series of questions that use the same scenario. For your convenience,
the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:
Each virtual machine has one virtual network adapter.
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You plan to implement nested virtual machines on VM1.
Which two features will you be prevented from using for VM1?

• A. NUMA spanning
• B. live migration
• C. Dynamic Memory
• D. Smart Pathing

Answer: BC

Explanation:
References:
https://blogs.technet.microsoft.com/virtualization/2015/10/13/windows-insider-preview-nested-virtualization/

NEW QUESTION 26
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021.
You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You mount the volume to C:Backup, and you format the volume by using exFAT. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 27
NOTE: This Question is a part of a series of questions that use the same or similar answer choices. An
answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two- node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1.
You need to configure monitoring of VM1. The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the computer Management snap-in
• D. the configurehyper.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: F

NEW QUESTION 28
DRAG DROP
You are preparing an image of Windows Server 2021.
The image is missing the driver foe a network adapter that is required in your environment. You need to ensure that the image contains the network adapter driver.
Which three cmdlets should you use in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them m the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 29
You have a server named Server1 that runs Windows Server 2021.
The disks on Server1 are configured as shown in the following table.

Windows Server 2021 is installed in C:Windows.
On which two volumes can you enable data deduplication? Each correct answer presents a complete solution.

• A. C:
• B. D:
• C. E:
• D. F:
• E. G:

Answer: CE

NEW QUESTION 30
......