Microsoft 70-743 Braindumps 2021

NEW QUESTION 1
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. End of Scenario:
You add a computer to subnet1. The computer has an IP address of 10.10.0.129 Web1 receives a request from the new computer and sends a response.
What should you do?

• A. 10.10.0.129
• B. 10.10.0.224
• C. 131.107.0.223
• D. 172.16.128.222

Answer: A

NEW QUESTION 2
Your network contains a new Active Directory domain named contoso.com.
You have a security policy that states that new servers should run Nano Server whenever possible. Which server role can be deployed on a Nano Server?

• A. DNS Server
• B. DHCP Server
• C. Remote Desktop Services
• D. Network Policy and Access Services

Answer: A

NEW QUESTION 3
You have a test environment that includes two servers named Server1 and Server2. The severs run Windows Server 2021. You need to ensure that you can implement SMB Direct between the servers. Which feature should the servers support?

• A. Remote Direct Memory Access (RDMA)
• B. Multipath I/O (MPIO)
• C. virtual machine queue (VMQ)
• D. single root I/O virtualization (SR-IOV)

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/jj134210%28v=ws.11%29.aspx?f=255&MSPPError=- 2147217396

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
You have a server named Server1 that runs Windows Server 2021. Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a performance counter data collector. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 5
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. IPAM uses a Windows Internal Database. You install Microsoft SQL Server on Server1.
You plan to move the IPAM database to SQL Server.
You need to create a SQL Server login for the IPAM service account.
For which user should you create the login? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://blogs.technet.microsoft.com/yagmurs/2014/07/31/moving-ipam-database-from-windowsinternal- database-wid-to-sql-server-located-on-the-same-server/

NEW QUESTION 6
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.
A domain user named User1 is a member of the groups shown in the following table.

On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the Global access scope to the user.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
User1 is using Server Manager, not IPAM to perform the administration. Therefore, only the “DHCP Administrators” permission on Server2 and the “DHCP Users” permissions on Server3 are applied. The permissions granted through membership of the “IPAM DHCP Scope Administrator Role” are not applied when the user is not using the IPAM console.

NEW QUESTION 7
DRAG DROP
You have a server named Server1 that runs Windows Server 2021.
On Server1 you use the Basic template to create a new Data Collector Set named CollectorSet1. You need to configure data collection for the performance counters. The configuration must support the following requirements:
✑ Data collection must run on a schedule.
✑ Data collection must stop if there is less than 1 GB of free disk space.
What should you modify to meet each requirement? To answer, drag the appropriate settings to the correct requirements. Each setting may be used once, more than once, or nor at all. You may need to drag the Split bar between panes or scroll to view content.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN
server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, You modify the Network Policies on Server1. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 9
DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine named VM1. VM1 runs Windows Server 2021. VM1 uses a VHD for storage.
The disk configuration of VM1 is shown in the exhibit.

You need to increase the size of volume D to 400 GB.
Which cmdlets should you run on Server1 and VM1? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 10
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has Microsoft System Center 2021 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM.
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers. Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Server 1 (IPAM): Access Policy
VMM must be granted permission to view and modify IP address space in IPAM, and to perform remote management of the IPAM server. VMM uses a “Run As” account to provide these permissions to the IPAM network service plugin. The “Run As” account must be configured with appropriate permission on the IPAM server.
To assign permissions to the VMM user account
In the IPAM server console, in the upper navigation pane, click ACCESS CONTROL, right-click Access Policies in the lower navigation pane, and then click Add AccessPolicy.
Etc.
Server 2 (VMM) #1: Network Service Server 2 (VMM) #2: Run As Account
Perform the following procedure using the System Center VMM console. To configure VMM (see step 1-3, step 6-7)

Etc. References:
https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

NEW QUESTION 11
You have a server named Server1 that runs Windows Server 2021. You need to install the DNS Server role on Server1.
What should you run?

• A. the Install-Package cmdlet
• B. the setup.exe command
• C. the dnscmd.exe command
• D. the Enable-WindowsOptionalFeature cmdlet

Answer: D

NEW QUESTION 12
HOT SPOT
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has two network adaptors named NK1 and NIC2. Server2 has two virtual switches named vSwitch1 and vSwitch2. N1C1 connects to vSwitch1. NIC2 connects to vSwitch2
Server1 hosts a virtual machine named VM1. VM1 has two network adapters named vmNIC1 and vmNIC1. VmNIC1 connects to vSwitch1. VmNIC2 connects to vSwitch2.
You need to create a NIC team on VM1.
What should you run on VM1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Name NICTEAM1 TeamMembers vmNIC1, vmNIC2 –TeamingMode $var1 –LoadBalancingAlgorithm
$var2

NEW QUESTION 13
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.
Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.

The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
As a member of the IPAM DNS Administrator Role of the ADatum zone, User1 can add DNS records to it. Box 2: Yes
As a member of the DNS Record Administrator Role of the Fabrikam zone, User1 can add DNS records to it. Box 3: No
DNS Record Administrators cannot delete zones, only administer DNS records. References:
https://technet.microsoft.com/en-us/library/hh831353(v=ws.11).aspx

NEW QUESTION 14
You have a DHCP server named Server1 that runs Windows Server 2021. You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?

• A. Create a second scope, and then create a superscope.
• B. Create a superscope, and then configure an exclusion range in Scope1.
• C. Create a new scope, and then modify the IPv4 bindings.
• D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizar

Answer: A

NEW QUESTION 15
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machines shown in the following table.

All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?

• A. On Server2, configure the VLAN ID setting of Switch1.
• B. On Server2, create an external switch and connect VM3 to the switch.
• C. Modify the subnet mask of VM1 and VM2.
• D. Configure network virtualization for VM1 and VM2.

Answer: D

NEW QUESTION 16
You have two servers that run Windows Server 2021. The server are configured as shown in the following table.

You need to create a failover cluster that contains both servers.
Which two commands should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A.

B.

C.

D.

E.

• A.

Answer: C

NEW QUESTION 17
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2021 installed. Server2 has Windows Server 2012 R2 installed.
Each Hyper-V server has three network cards. Each network card is connected to a different subnet. Server1 contains a dedicated migration network.
Server2 contains a virtual machine named VM5.
You plan to perform a live migration of VM5 to Server1.
You need to ensure that Server1 uses all available networks to perform the live migration of VM5. What should you run?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessorcmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: E

Explanation:
Set-VMHost -UseAnyNetworkForMigration
Specifies how networks are selected for incoming live migration traffic. If set to $True, any available network on the host can be used for this traffic. If set to $False, incoming live migration traffic is
transmitted only on the networks specified in the MigrationNetworks property of the host. References:
https://technet.microsoft.com/en-us/library/hh848524.aspx

NEW QUESTION 18
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Invoke-IpamGpoProvisioning –Domain contoso.com –GpoPrefixName IPAM –IpamServerFqdn dc1.contoso.com

NEW QUESTION 19
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has two virtual machines named VM1 and VM2.
You discover that VM1 and VM2 can communicate with Server1 over the network.
You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1.
Which cmdlet should you use?

• A. Enable-VMSwitchExtention
• B. Set-NetNeighbor
• C. Set-VMSwitch
• D. Remove-VMSwitchTeamMember

Answer: C

Explanation:
The virtual switch needs to be configured as an “Private” switch.
What you need is a private switch to insure VM1 and VM2 can talk to each other, but not the host. The difference between this and an Internal switch is that VM1 and VM2 can talk to the host and each other. Regardless the command is the same:
Set-VMSwitch (switchname)-SwitchType Private
https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/set-vmswitch

NEW QUESTION 20
DRAG DROP
You have a server named Server1 that runs Windows Server 2021.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Deploy Network Controller using Windows PowerShell Step 1: Install-WindowsFeature
Install the Network Controller server role
To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER.
Install-WindowsFeature -Name NetworkController –IncludeManagementTools Step 2: New-NetworkControllerNodeObject
You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
New-NetworkControllerNodeObject –Name <string> -Server<String> -FaultDomain <string>-RestInte Step 3: Install-NetworkControllerCluster
To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkControllerCluster –Node <NetworkControllerNode[]> –ClusterAuthentication …
Step 4: Install-NetworkController
To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkController –Node <NetworkControllerNode[]> –ClientAuthentication References:
https://technet.microsoft.com/en-us/library/mt282165.aspx

NEW QUESTION 21
DRAG DROP
You have a physical server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host. On Server1, you create a virtual machine named VM1 that runs Windows Server 2021.
You plan to install the Hyper-V server role on VM1.
You need to ensure that you can configure VM1 to host virtual machines.
How should you compete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 22
You have a remote access server named Server1 that runs Windows Server 2021. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -forceTunnel Enabled.
You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?

• A. Set-DnsClientGlobalSetting
• B. Set-DAEntryPoint
• C. Set-DnsClientNrptRule
• D. Set-DnsClientNrptGlobal

Answer: B

NEW QUESTION 23
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage –Edition Datacenter –DeploymentType Host –Package Microsoft- NanoServer-Compute-Package –MediaPath ‘D:’ –TargetPath C:Nano1Nano1.wim – ComputerName Nano1 –DomainName Contoso.com
Does this meet the goal?

• A. Yes
• B. NO

Answer: A

NEW QUESTION 24
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine named VM1 that runs Windows Server 2021.
You install the Hyper-V server role on VM1.
You need to ensure that the virtual machines hosted on VM1 can communicate with the virtual machines hosted on Server1.
What should you do?

• A. On Server1, run the Set-VmNetworkAdapterIsolation cmdlet and specify the –MultiTenantStack Off parameter.
• B. On VM1, run the Set-VMNetworkAdapter cmdlet and specify the –MacAddressSpoofing Off parameter.
• C. On VM1, run the Set-VmNetworkAdapterIsolation cmdlet and specify the –MultiTenantStack On parameter.
• D. On Server1, run the Set-VMNetworkAdapter cmdlet and specify the –MacAddressSpoofing On parameter.

Answer: C

Explanation:
References: https://docs.microsoft.com/en-us/powershell/module/hyper-v/setvmnetworkadapterisolation? view=win10-ps

NEW QUESTION 25
HOT SPOT
Your network contains an Active Directory forest named contoso.com. The forest has three sites named Site1, Site2 and Site3.
Distributed File System (DFS) for the forest is configured as shown in the exhibit.

The forest contains a server named Server2 that hosts the DFS namespace.
\Contoso.comNamespace1Folder2 has the following configuration.

\ContosoNamespace1Folder2 has the targets configured as shown in the following table.

For each of the following statement, Select Yes if Statement is true. Otherwise , select No.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 26
HOT SPOT
You have four Hyper-V hosts named Server1, Server2, Server3, Server4 that run Windows Server 2021. The hosts are nodes in a failover cluster.
A virtual machine named VM1 is running in the failover cluster. The role for VM1 is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the Information presented in the graphic.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:https://msdn.microsoft.com/en-us/library/aa369665(v=vs.85).aspx

NEW QUESTION 27
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. The hosts are nodes in failover cluster.
You have a virtual machine named VM1. VM1 connects to a virtual switch named vSwitch1. You discover that VM1 automatically live migrates when vSwitch temporarily disconnects. You need to prevent VM1 from being live migrated when vSwitch1 temporarily disconnects. What should you do?

• A. From the network adapter setting of VM1, disable the Protected network setting.
• B. From the network adapter setting of VM1, disable the Heartbeat integration service.
• C. Run the Set-VMNetworkAdapter cmdlet and set IsmanagementOS to False.
• D. Run the Set-VMNetworkAdapter cmdlet and set StormLimit to 0.

Answer: A

NEW QUESTION 28
......