How Many Questions Of HPE0-S54 Samples

NEW QUESTION 1
A customer needs a VDI solution. The amount of compute per U of rack space will be a key point in their solution selection.
Which HPE product would be an ideal solution as part of your RFP response?

• A. HPE Apollo 4510 Gen10
• B. HPE Apollo 4200 Gen9
• C. HPE SY480 Gen10
• D. HPE DL580 Gen10

Answer: A

NEW QUESTION 2
A financial customer has a remote office that requires a significant amount of computing resources, but has no local IT staff. They need simple and affordable management and disaster recovery of their site.
Which solution should you recommend to meet this customer’s needs?

• A. HPE ConvergedSystem 300
• B. HPE SimpliVity 380
• C. HPE StoreOnce 5100
• D. HPE Serviceguard for Linux

Answer: B

NEW QUESTION 3
A customer is planning a new virtualization project and requests assistance with preparing a proposal for his management team.
Which financial information can be generated using the Alinean toolset? (Choose two.)

• A. licensing costs
• B. payback period
• C. cash flow
• D. bill or materials
• E. roles and responsibilities

Answer: BC

NEW QUESTION 4
A customer needs a Synergy solution using Image Streamer in a production environment. What is the minimum number of Synergy frames needed for this solution?

• A. 5
• B. 2
• C. 3
• D. 1

Answer: C

NEW QUESTION 5
What are features of the HPE Synergy Planning Tool? (Choose two.)

• A. It creates a REST configuration file based on configuration created
• B. It recommends the best top-of-rack switch
• C. It provides estimated power consumption and weights of the solution
• D. It runs on the Partner Ready Portal
• E. It aids configuration of rack, Frames, compute, storage, fabric and power

Answer: CE

NEW QUESTION 6
A customer is using a DL380 Gen10. They attempt to boot an installation media ISO with iLO Virtual Media, and the system fails to access the ISO. What are the most likely causes of this issue? (Select two.)

• A. HPSSA drives are configured for RAID 1 and not RAID 5
• B. Legacy Boot is not enabled and the media is not UEFI compatible
• C. Secure Boot has derived access to the ISO
• D. The ISO operating system is not supported by HPE
• E. UEFI is not configured for iSCSI initiator support

Answer: CD

NEW QUESTION 7
You are configuring a new server for a customer. The customer has given you the following information regarding their environment:
2 processors with 22 cores
256GB RAM
600GB of usable internal storage
10GB network, dual connections
iLO Advanced
3 years of 7x24 basic support
Which additional information do not need to determine the best option for internal storage?

• A. Does the application require a large memory footprint
• B. Does the application require RoCE capable adapters?
• C. Is the application workload sensitive to I/O latency?
• D. Will a Fibre Channel card be required?

Answer: C

NEW QUESTION 8
A customer wants to streamline firmware and driver management of their HPE Synergy nodes running VMware hypervisor.
They want to implement HPE Smart Update Tools (SUT). Which of the following options applies to the solution?

• A. HPE Support Pack for ProLiant (SPP) is uploaded to Composer and applied to the profile
• B. All VMware updates and drivers are downloaded by HPE OneView
• C. ICsp coordinates firmware and driver updates
• D. Each server must be booted to the SPP through iLO Console virtual media by the administrator

Answer: A

NEW QUESTION 9
A c7000 customer wants to expand their server environment. You want to encourage them to move to Synergy to prepare them for the future.
Which question should you ask?

• A. Is there a requirement for enhanced security on the management network?
• B. Do they want to maximize the memory footprint of their servers?
• C. Does their application workload benefit from persistent memory?
• D. Are they planning to purchase ProLiant Gen10 servers as part of the project?

Answer: A

NEW QUESTION 10
A customer is using HPE Smart Update Manager (SUM) for firmware update. They plan to add 100 Gen10 ProLiant servers, and they are concerned about whether HPE SUM will be able to support this size of installation.
What other option could the customer use for firmware updates that has increased scalability?

• A. iLO Advanced Premium Security Edition
• B. Insight Control server provisioning
• C. Insight Cluster Management Utility
• D. iLO Amplifier Pack

Answer: D

NEW QUESTION 11
A customer is learning about the performance enhancements of a new DL380 Gen10 system. How does this system help with performance problems?

• A. enables faster L4 cache on CPU
• B. provides scalable persistent memory
• C. provides compatibility with Intel Broadwell processors
• D. eliminates the need for Service Level Agreements for Cloud services and VDI

Answer: B

NEW QUESTION 12
You need to demonstrate the runtime firmware verification scan functionality on a ProLiant DL380 Gen10 server. You find that the option is not available in the UEFI interface.
What is the most likely cause of the problem?

• A. The server boot mode is set to UEFI
• B. The Onboard Administrator has not been initialized
• C. The file firmware-ilo5-1.10.1.1.x86_64.rpm is the incorrect version
• D. The required iLO license has not been installed

Answer: D

NEW QUESTION 13
A customer needs to boot from PXE with IPv6 across the Gen10 servers. Which option must be enabled to use this feature?

• A. UEFI Boot with IPv6 enabled
• B. Legacy One-Time boot menu
• C. UEFI Secure Boot
• D. HPE Intelligent Provisioning with IPv6 DHCP

Answer: A

NEW QUESTION 14
You are introducing Synergy to a new customer. Which tool can you use to demonstrate the physical components of the Synergy frame and how they connect?

• A. HPE Product Bulletin
• B. HPE Synergy Planning Tool
• C. HPE Product Tour
• D. HPE PartSurfer

Answer: B

NEW QUESTION 15
You prepared a proposal for a customer that plans to deploy Hyper-V clusters that include network adapters with RoCE support. The customer would like to know why this specific adapter was included in the proposal.
How would you explain your choice?

• A. RoCE adapters offer Secure Encryption functionality that can help to secure migration traffic
• B. RoCE adapters are the only adapters certified to use in Hyper-V based cluster
• C. RoCE adapters can use 100 Gb/s speed for internal virtual machine migrations
• D. RoCE adapters will improve performance for live migration and Microsoft SMB Direct environments

Answer: D

NEW QUESTION 16
A customer needs to migrate their current c7000 network and Fibre Channel infrastructure to a converged network.
Which interconnect module should the customer use?

• A. HPE Flex10
• B. HPE 8Gb Fibre Channel pass-through
• C. HPE FlexFabric 20/40 F8
• D. HPE 16Gb/24-port Fibre Channel switch

Answer: C

NEW QUESTION 17
An environmentally sensitive customer has a data center that operates with fresh air cooling. Which feature of HPE ProLiant Gen10 servers makes them suitable to operate in this environment?

• A. HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Support
• B. Intel® Xeon-Platinum 8180M Support
• C. ASHRAE A4 compliance
• D. ACPI 6.1 Compliance

Answer: C

NEW QUESTION 18
A customer is considering installing a Synergy frame in an existing rack where their c7000 chassis is currently installed.
Which question should you ask to ensure the new frame will be supported in the rack?

• A. Are there any third party servers installed?
• B. How deep is the existing rack?
• C. Is there a UPS installed in the rack?
• D. How wide is the existing rack?

Answer: B

NEW QUESTION 19
During a presentation on Synergy fabric technology, a customer states that they would not purchase Virtual Connect modules because they would be paying for Fibre Channel technology that they have no intention of using.
How should you handle this objection?

• A. Explain to the customer that the only Fibre Channel support is through FCoE and does not add to the module cost.
• B. Explain to the customer that HPE does not pass on the cost of including Fibre Channel support to the customer.
• C. Inform the customer that native Fibre Channel support is an optional, licensed feature.
• D. Inform the customer that native Fibre Channel support is provided through an optional daughterboard.

Answer: D

NEW QUESTION 20
What must a customer consider when adding a connection to a Server Profile Template? (Select two.)

• A. Server Profiles will automatically be refreshed
• B. The associated Servers will need to be rebooted
• C. Additional Server Profiles will need to be created
• D. The associated Server Profiles will be flagged as inconsistent
• E. Server Profiles will need to be updated from the template

Answer: BE

NEW QUESTION 21
While installing a three frame Synergy solution, only two of the frames are identified during the discovery process.
What should you do to get resolution?

• A. Remove and re-insert the standby Composer
• B. Issue a refresh command to the enclosure
• C. Open the front panel of the Composer, and read the error message
• D. Validate Frame Link Module topology

Answer: D

NEW QUESTION 22
A customer plans to use RESTful API to deploy their rack of DL380 Gen10 system. How does use of this protocol support the customer? (Select two.)

• A. support multiple scripting languages
• B. Secure remote scripting
• C. Ability to run scripts against multiple servers
• D. Boot via SFTP
• E. Boot via HTTP

Answer: AB

NEW QUESTION 23
......