The Secret Of HP HPE2-T36 Exam Engine

NEW QUESTION 1
What unique identifier does HPE OneView use to interact with each resource individually?

• A. WWN
• B. URI
• C. MAC address
• D. serial number

Answer: B

NEW QUESTION 2
Which condition will prevent HPE OneView from reapplying a server profile?

• A. The server hardware matches the server hardware type defined in the profile.
• B. The server profile is assigned to the server hardware.
• C. The server hardware is in a degraded state.
• D. The server hardware is powered off.

Answer: B

NEW QUESTION 3
When deploying an HPE OneView virtual appliance in a Microsoft Hyper-V environment, what is the HPE recommendation related to virtual machine disk properties?

• A. Convert the disk to fixed size.
• B. Create the disk as fixed size.
• C. Create the disk as dynamically expanding.
• D. Convert the disk to dynamically expanding.

Answer: B

NEW QUESTION 4
A customer is performing lifecycle management on their existing ESXi cluster. They edit the Server Profile Template for the ESXi cluster.

What will happen to all of the server profiles associated with the template after selecting the "Service Pack for HPE ProLiant 2021.07.1" and clicking OK?

• A. All server hardware associated with the profiles will immediately do a graceful shutdown and boot into Intelligent Provisioning to update the firmware.
• B. The Smart Update Tools will immediately begin to update the firmware and drivers on the systems while the ESXi hosts are still online.
• C. All server profiles associated with the template will be marked as inconsistent with the template.
• D. HPE OneView for vCenter will launch vCenter Update manager to begin updating the systems within the ESXi cluster.

Answer: B

NEW QUESTION 5
What tool can you use to provision hosts using server profiles to create or grow a Hyper-V cluster?

• A. HPE Insight Control Server Provisioning
• B. HPE OneView for Microsoft System Center
• C. HPE iLO Virtual Media
• D. Microsoft Operations Manager

Answer: B

NEW QUESTION 6
A server administrator needs to add a new c7000 enclosure to their HPE Oneview management appliance. What information Is required? (Select two)

• A. login credentials for Onboard Administrator
• B. Onboard Administrator IP address
• C. login credentials for Virtual Conned
• D. Virtual Connect IP address

Answer: AB

NEW QUESTION 7
Synergy Composer enables remote support of which components? (Choose two.)

• A. HPE Onboard Administrator
• B. HPE Virtual Connect FlexFabric-20/40 F8 Module
• C. HPE Synergy D3940 storage module
• D. HPE Synergy 12000 frames
• E. HPE Synergy compute modules

Answer: CE

NEW QUESTION 8
Which actions can be taken on alerts in the Activity page in HPE OneView?

• A. re-send email notification for specific alerts
• B. delete alerts
• C. assigning alerts to a specific user
• D. mark an alert as fixed

Answer: C

NEW QUESTION 9
What package type is used for HPE OneView Virtual Appliance deployment in a Red Hat Linux KVM hypervisor environment?

• A. rpm
• B. yum
• C. DNF
• D. qcow2

Answer: D

NEW QUESTION 10
An administrator is configuring a server profile template, but does not see the Ethernet network called “VLAN 210” that had been created earlier. What could be the cause?

• A. VLAN 210 was never configured in the Logical Interconnect Group.
• B. VLAN 210 is already in a Network Set.
• C. VLAN 210 does not exist on the upstream switches.
• D. VLAN 210 has Private Network enabled.

Answer: C

NEW QUESTION 11
Refer to the exhibit.

A customer is having issues assigning a server profile to a DL380 Gen8. Using the following figure, what is the most likely cause preventing the server profile from being assigned?

• A. The server name is not set.
• B. The server is in monitored mode.
• C. Server Profiles are not supported on DL servers.
• D. The server is powered on.

Answer: D

NEW QUESTION 12
An administrator needs to customize the BIOS and local RAID configuration for a collection of HPE ProLiant servers. What should the administrator use to accomplish this task?

• A. Server Profile Template
• B. Server hardware
• C. Smart Start Scripting Toolkit
• D. Global Dashboard

Answer: D

NEW QUESTION 13
An administrator needs to restore an appliance that was recently updated. What does the administrator need
keep in mind regarding restoring from a backup?

• A. The appliance can be restored only from the maintenance console.
• B. A successful appliance restore requires the password configured during backup.
• C. The appliance cannot be restored from a backup older than 180 days.
• D. An appliance can only be restored from a backup created on an appliance of the same version.

Answer: D

NEW QUESTION 14
You assign a server profile to an existing BL Gen 8 server within a managed enclosure with Affinity set to “Device Bay + Server Hardware”. What would happen if you replace the server in the enclosure with a new BL Gen 10 server hardware resource?

• A. It will apply the profile if the correct server hardware type is installed.
• B. It will prevent the profile if the server is configured with Secure Boot mode in the BIOS.
• C. It will prevent the profile from being applied if a different server is inserted to that bay.
• D. It will apply the profile if a server with the correct serial number installed.

Answer: B

NEW QUESTION 15
What does HPE OneView use to define the network connectivity for an Enclosure Group?

• A. Logical Switch Group
• B. Logical Interconnect Group
• C. Smart Link
• D. network set

Answer: B

NEW QUESTION 16
What is required when creating an Ethernet Network in HPE OneView? (Choose two.)

• A. Network Name
• B. VLAN Type
• C. CHAP Password
• D. association with subnet ID
• E. WWPN

Answer: AB

NEW QUESTION 17
A customer has a strict change control environment. How do Server Profile Templates help with change control policies?

• A. They allow users to define configurations once and within minutes.
• B. They help to monitor, flag, and update server profiles in HPE OneView.
• C. They allow server profile mobility.
• D. They provision hardware quickly.

Answer: B

NEW QUESTION 18
Where would you go in the HPE OneView Main Menu to access information about the environment status that can be exported to csv?

• A. Reports
• B. Dashboard
• C. Data Centers
• D. Activity

Answer: A

NEW QUESTION 19
You have a new HPE BladeSystem C7000 enclosure to add to your existing HPE OneView appliance as a managed resource. What is the proper PowerShell Cmdlet to achieve this task?

• A. Add-HPOVEnclosure –Hostname 192.168.1.100 –Username Administrator –Password MyP@ssw0rd
• B. Add-HPOVServer –Hostname 192.122.8.189 –Username Administrator –Password MyP@ssw0rd
• C. New-HPOVLogicalEnclosure –Name 192.122.8.189
• D. Add-HPOVPowerDevice –Hostname 192.168.1.100 –Username admin –Password MyP@ssw0rd

Answer: A

NEW QUESTION 20
Match the minimum HPE OneView license required to each function. (Matches may be used more than once.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Partner integration – HPE OneView Advanced Storage provisioning – HPE OneView Advanced Firmware management – HPE OneView Advanced Inventory – HPE OneView Standard
Health monitoring – HPE OneView Standard Remote support – HPE OneView Advanced

NEW QUESTION 21
A customer wants to open tickets automatically within ServiceNow from alerts generated within HPE OneView. Which HPE OneView integration will allow the customer to do this?

• A. FTP
• B. HTTP
• C. SSH
• D. REST API

Answer: D

NEW QUESTION 22
Your customer is running ESXi on an HPE BladeSystem managed by HPE OneView. They want to be able to add networks to the ESXi system without modifying the Virtual Connect configuration. Which type of network should be used?

• A. mapped
• B. tagged
• C. tunnel
• D. untagged

Answer: C

NEW QUESTION 23
Which resource categories can be included in a scope? (Choose two.)

• A. racks
• B. data centers
• C. firmware bundles
• D. enclosures

Answer: AC

NEW QUESTION 24
An SY480 compute module is having issues and needs to have the motherboard replaced in the interest of time, you decide to move the hard drives to a spare compute module. To prevent losing data, what do you need to do before applying the same profile to the new blade?

• A. Check “Re-initialize controller on next profile application” in the “Local Storage” section of the ServerProfile.
• B. Check “Import existing logical drives” in the “Local Storage” section of the Server Profile.
• C. Ensure that the RAC level is configured “or RAID1 then select the “Boot” checkbox in the “Local Storage” section of the Server profile.
• D. Select “Create logical drive” in the “Local Storage” section of the Server Profile, then uncheck “Manage integrated storage controller”.

Answer: B

NEW QUESTION 25
A customer has a four node ESXi cluster. They update drivers via vCenter Update Manager and want use HPE OneView Server Profile Templates to update the firmware while the systems are online. Click on the place they should select within the server profile template to update the firmware while the systems are online.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 26
......