Renovate Implementing HPE Composable Infrastructure Solutions HPE0-S58 Braindumps

NEW QUESTION 1
A customer using HPE Synergy is unable to access certain VLANs from a single NIC port of a compute module.
Which configuration option in the server profile needs to be verified to ensure that the server profile has the correct configuration?

• A. multiple Networks are assigned to the connection
• B. multiple VLAN checkbox is selected
• C. VxLAN has not been enabled
• D. assigned Network Set includes all needed VLANs

Answer: D

NEW QUESTION 2
Match each interconnect device with its appropriate use case.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05385134 https://h20215.www2.hpe.com/v2/GetPDF.aspx/c04815127.pdf

NEW QUESTION 3
What is the purpose of the OmniStack Accelerator card installed in HPE SimpliVity platform?

• A. It performs inline data efficiency processing and deduplication
• B. It provides very fast SSD capacity for demanding workloads
• C. It provides graphic acceleration for VDI infrastructure
• D. It accelerates CPU processing within a virtual machine

Answer: B

Explanation:
References:
https://assets.ext.hpe.com/is/content/hpedam/documents/a00026000-6999/a00026728/a00026728enw.pdf

NEW QUESTION 4
Refer to the exhibit.

How should an integrator pair interconnect bays to set up redundant fabrics in an HPE Synergy 12000 Frame?

• A. Interconnect bays 1 and 2; bays 3 and 4; bays 5 and 6.
• B. Interconnect bays 1 and 6; bays 2 and 5; bays 3 and 4.
• C. Interconnect bays 1 and 4; bays 2 and 5; bays 3 and 6.
• D. Interconnect bays 1 and 3; bays 2 and 4; bays 5 and 6.

Answer: C

NEW QUESTION 5
Refer to the exhibit.

A customer with the design shown needs to perform an in-place upgrade to its environment to scale the two-frame single homed Multimodule Link Aggregation Group (MLAG) configuration to a three-frame
configuration. The new frame needs to provide a redundant 20Gb connection for the compute module ports in Fabric 3.
Which interconnect modules should the integrator use in Frame 3?

• A. HPE Virtual Connect SE 40Gb F8 module in bay 3 and HPE Virtual Connect SE 40Gb F8 Module in bay 6
• B. HPE Synergy 10Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6
• C. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 20Gb Interconnect Link Module in bay 6
• D. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6

Answer: B

NEW QUESTION 6
An integrator prepares deployment documents with the list of all the hardware and software components. The integrator also needs a list of all infrastructure services deployed, with the functionality described.
Which services are provided by the vCenter Server component and should be placed in the report? (Choose two.)

• A. Auto Deploy
• B. Single Sign-On
• C. Update Manager
• D. Lookup Service
• E. Certificate Authority

Answer: CD

NEW QUESTION 7
Which technology used in HPE SimpliVity allows a reduction in storage consumption?

• A. trunking
• B. hashing
• C. consolidation
• D. compression

Answer: D

NEW QUESTION 8
An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames.
Which configuration steps must the integrator perform to provide the customer with this functionality?

• A. Enable Remote Support and Insight Online Integration in the Composer UI
• B. Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard
• C. Configure OneView with iLO Amplifier pack
• D. Activate iLO Federation on all installed compute nodes

Answer: C

NEW QUESTION 9
How many redundant fabrics are supported in an HPE Synergy frame?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: C

Explanation:
References: https://h20215.www2.hpe.com/v2/GetPDF.aspx/c04815113.pdf (2)

NEW QUESTION 10
How can an integrator use an HPE Synergy D3940 storage module to provision shared storage to compute modules without requiring a separate SAN to be connected to the frame?

• A. Configure drives as DAS storage, and use Image Streamer to present the disks as iSCSI targets to the whole frame.
• B. Configure drives as SAN storage, and configure a Smart Array P416ie-m Controller into HBA mode.Add the SAN disk to the server profile.
• C. Configure drives as DAS storage, and use StoreVirtual VSA to present the disks as iSCSI storage to the whole frame.
• D. Configure drives as SAN storage, and configure a P240nr array controller into HBA mod
• E. Add the SAN disk to the server profile.

Answer: C

Explanation:
References: https://www.iistech.com/blog/composable-infrastructure-with-hpe-synergy-part-2

NEW QUESTION 11
An integrator needs to configure a set of networks for Synergy compute nodes to send data to devices outside of a Synergy frame.
How should the integrator complete the task?

• A. Add the network to an interconnect bay within a Logical Enclosure (LE)
• B. Add the networks to an uplink set within a Logical Interconnect Group (LIG)
• C. Add the networks to an Enclosure Group (EG)
• D. Add the network sets to a Logical Interconnect Group (LIG)

Answer: A

NEW QUESTION 12
A customer wants to add nodes to the existing ESXi cluster using the HPE OneView for vCenter Server. What must be done before this functionality can be used?

• A. The cluster must be imported to HPE OneView
• B. An additional VMkernel port must be created for OneView integration
• C. All local datastores must be disconnected or removed from the other cluster nodes
• D. At least one node of the cluster must be placed in the maintenance mode

Answer: A

NEW QUESTION 13
Which policy can an integrator apply when creating a datastore using HPE OneView for vCenter Server?

• A. Data at Rest encryption policy
• B. Round Robin load balancing policy
• C. Recovery Manager Central policy
• D. virtual machine Restart policy

Answer: C

NEW QUESTION 14
A customer has a Hyper-V and ESXi hypervisors deployed on an HPE Synergy platform. The customer needs a tool that will provide health and performance monitoring. Because their environment is very dynamic, the tool should also help them to optimize performance and predict and prevent problems.
Which tool should the customer use?

• A. HPE InfoSight
• B. HPE OneView for vCenter Server
• C. HPE Composer
• D. HPE Global Dashboard

Answer: C

NEW QUESTION 15
What are valid uses for an IPv4 address pool when configuring an HPE Synergy solution? (Choose two.)

• A. assignment of IP addresses for NICs in an operating system
• B. assignment of IP addresses for Composer appliances
• C. assignment of IP addresses for PXE booting to a deployment server
• D. assignment of IP addresses for interconnect modules
• E. assignment of IP addresses for iLOs

Answer: DE

Explanation:
References: https://techlibrary.hpe.com/docs/synergy/shared/setup_overview/index.html

NEW QUESTION 16
A customer is considering implementing a DRS cluster, but they would like to know how DRS can help to achieve performance goals.
How should an integrator respond?

• A. When powering on a virtual machine, a DRS cluster can automatically place it on the optimal host.
• B. Selected virtual machines will be assigned higher priority when the amount of physical resources will drop below a specific level.
• C. A DRS cluster will migrate a virtual machine to a different host when available network bandwidth will drop below a specific level.
• D. If more than 50 virtual machines will be running on a single host, DRS cluster will configure CPU affinity to proportional resource allocation.

Answer: B

NEW QUESTION 17
Match each HPE server platform with optimal workload.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 18
An integrator needs to validate whether the datastore created for ESXi systems based on 3PAR virtual volume can support all DRS cluster functionalities.
Click on the parameter that the integrator needs to verify.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 19
A customer is planning an HPE Synergy solution with 20 frames and needs to minimize the number of management ports that are required to connect the frames into the existing management network.
Which procedure should the integrator use to address the customer’s concern?

• A. Connect the RJ-45 front ports of each frame to an external switc
• B. Then, connect the uplink from the external switch into the customer’s management network.
• C. Connect FLMs from all frames to two external switches for redundanc
• D. Then, connect the two uplinks from the two switches into the customer’s management network.
• E. Connect the RJ-45 front ports of each frame to two external switches for redundanc
• F. Then, connect the uplink from the two switches into the customer’s management network.
• G. Connect FLMs from all frames into a management rin
• H. Then, connect the management ring to the customer’s management network using two uplinks.

Answer: D

NEW QUESTION 20
Refer to the exhibit.

A Synergy integrator needs to establish the module cluster links between two master modules, as shown. Which ports can the integrator use for the module cluster links?

• A. 1 and 2
• B. 3 and 4
• C. 5 and 6
• D. 7 and 8

Answer: D

Explanation:
References:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00017673en_us&docLocale=en_US (15)

NEW QUESTION 21
......