All About Certified HPE0-S60 Free Draindumps

NEW QUESTION 1
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2
Why would you recommend this change?

• A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
• B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
• C. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
• D. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

Answer: B

NEW QUESTION 2
Which statement about login redistribution is true?

• A. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
• B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
• C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
• D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links

Answer: C

NEW QUESTION 3
Which statement about HPE Superdome Flex 280 is true?

• A. It supports 2 to 8 sockets in 2-socket increments.
• B. it cannot be managed using HPE OneView.
• C. It must be equipped with at least 768 GB of memory.
• D. It can support up to two nPars with an external RMC.

Answer: C

NEW QUESTION 4
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

• A. App Volume Set
• B. Storage Container
• C. Virtual Volume Set
• D. virtual Volume

Answer: C

NEW QUESTION 5
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

• A. Pause flood protection
• B. Loop protection
• C. LLDP tagging
• D. Storm control

Answer: D

NEW QUESTION 6
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.

• A. HPE Composer Maintenance Console
• B. HPE OneView Update Readiness Checker
• C. HPE OneView Global Dashboard
• D. HPE OneView Firmware Compliance Report

Answer: A

NEW QUESTION 7
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

• A. It is equipped with HPE Persistent memory by default
• B. It can support a single processor only and up to 4 per chassis
• C. It is fully managed using HPE OneView including all connections
• D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs

Answer: B

NEW QUESTION 8
Which statement about manual orchestration during the firmware update is true?

• A. It is supported only for logical enclosures with at least three frames
• B. It provides an ability to select and update one side of the Interconnect topology at a time
• C. It provides the ability to install an older firmware version than currently Installed In the interconnect
• D. It allows all the interconnect modules to be activated manually at the same time.

Answer: B

NEW QUESTION 9
Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed
Which tool should you use to troubleshoot the problem?

• A. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered
• B. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
• C. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
• D. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.

Answer: A

NEW QUESTION 10
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)

• A. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
• B. HPE MSA 2062 Storage Array is not supported in HPE OneView
• C. HPE OneView replaces array management tools for both types of array
• D. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
• E. HPE Primera 650 can be managed using HPE OneView.

Answer: AD

NEW QUESTION 12
Match each HPE Synergy logical component with the definition.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 13
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15
Which statement about an HPE Oneview support dump is true?

• A. Appliance support dump by default contains a logical enclosure support dump
• B. Support dump is a binary file that can be opened only in a dedicated application
• C. Support dump can be created if HPE Virtual Connect modules are installed in the frame
• D. Preview support dump is available only when creating an appliance support dump

Answer: B

NEW QUESTION 16
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?

• A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
• B. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
• C. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
• D. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy

Answer: C

NEW QUESTION 17
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets
Which HPE compute system meets the customer requirements?

• A. HPE ProLiant DL580 Gen10
• B. HPE ProLiant OL380 Gen 10 Plus
• C. HPE Synergy 480 Gen10 Plus
• D. HPE Superdome Flex system

Answer: C

NEW QUESTION 18
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

• A. Pause flood protection
• B. sFlow
• C. Storm control
• D. Port flap protection

Answer: B

NEW QUESTION 19
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives
The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

• A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
• B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
• C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
• D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

Answer: B

NEW QUESTION 20
......