Cisco 300-365 Testing Material 2021

NEW QUESTION 1
An engineer must implement WLC features that enhance roaming. Which two technologies fulfill this requirement? (Choose two.)

• A. 802.11v
• B. WPA2
• C. Cisco Centralized Key Management
• D. 802.1X
• E. 802.11r

Answer: AE

NEW QUESTION 2
Which IEEE standard allows for the client-AP handshake to be completed before the client roams?

• A. 802.11v
• B. 802.11e
• C. 802.11r
• D. 802.11k

Answer: C

NEW QUESTION 3
A customer has implemented a wireless network that requires tuning for High Density applications utilizing the RX-SOP feature. They are experiencing a high noise floor (average of -65 dBm) and expect that to decrease significantly. A sampling of radios determine that most Access Points have neighbors on the same channel at a power level of -75 dBm. Which value should the customer use to start tuning RX-SOP?

• A. -60 dBm
• B. -65dBm
• C. -70 dBm
• D. -75 dBm
• E. -80 dBm

Answer: C

NEW QUESTION 4
How many APs can be set as master and what is the maximum number of slave APs for FlexConnect AP upgrades in a specific FlexConnect group?

• A. one master and three maximum slave APs per AP model
• B. one master and two backup master AP per AP model
• C. one master and four maximum slave APs per AP model
• D. one master and one backup master AP per AP model

Answer: A

NEW QUESTION 5
A wireless printer has been configured with a static IP address. Which action does the Cisco WLC take in response?

• A. It does not transfer AAA requests to the printers.
• B. It does not transfer ARP requests to the printers.
• C. It does not transfer join requests to the printers.
• D. It does not transfer location information to the printers.

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/118833- wlcdesign-
ftrs-faq.html

NEW QUESTION 6
A customer requires that an SSID is broadcasted to specific access points that use certain interfaces. Which feature can be used to achieve this goal?

• A. mobility groups
• B. filex-connect groups
• C. interface groups
• D. AP groups

Answer: C

NEW QUESTION 7
Which value is the default Rx SOP threshold on a WLC?

• A. auto
• B. low
• C. medium
• D. high

Answer: A

NEW QUESTION 8
An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets.
Clients will be assigned a subnet by location. Which type of groups can the engineer user to map the smaller subnets to the corporate WLAN?

• A. AP groups
• B. RF groups
• C. interface groups
• D. WLC port groups

Answer: C

NEW QUESTION 9
An engineer has deployed a WLAN in a high-density auditorium and expects the number of clients to grow.
Which WLC configuration can be used to increase the IP space without any service disruptions?

• A. dynamic interface
• B. interface group
• C. AP group
• D. RF group

Answer: B

NEW QUESTION 10
Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three options (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)

• A. authentication-central/switch-local
• B. standalone mode
• C. authentication-central/switch-central
• D. WPA2 personal
• E. authentication-local/switch-local
• F. WPA2 enterprise

Answer: BDE

NEW QUESTION 11
A customer is concerned about the number of associations on the guest WLAN and wants to reduce load to ensure there are sufficient resources for the High Density WLAN. Which configuration setting meets this need?

• A. Change the QoS profile of the guest WLAN to Bronze.
• B. Set a low Maximum Allowed Clients on the Guest WLAN.
• C. Configure MFP client protection on the high density WLAN.
• D. Enable DHCP Profiling and restrict guest devices using a policy map.

Answer: B

NEW QUESTION 12
What is the best practice for setting the WLC v7.0 use of WLAN QoS settings to support SIP phones on a VoWLAN?

• A. Configure SIP with static CAC only with SIP call snooping.
• B. Configure SIP with static CAC only without SIP call snooping.
• C. Configure SIP with load-based CAC only with SIP call snooping.
• D. Configure SIP with load-based CAC only without SIP call snooping.
• E. Configure SIP with load-based CAC and TSPEC only with SIP call snoopin

Answer: A

NEW QUESTION 13
An engineer must reduce the amount of inter-controller roaming at a facility that has deployed N+1 high availability. Which strategy for performing this action is the best?

• A. Ensure all access points on the campus are configured with the same mobility group.
• B. Disable interface groups on the SSID.
• C. Ensure all access points in a geographic location are configured with the same primary WLC.
• D. Enable client load balancing on the SSI

Answer: C

NEW QUESTION 14
CMX Facebook WiFi can allow access to the network before authentication. Which two of the following options are available? (Choose two)

• A. Allow all the traffic before authentication and intercept HTTPs only.
• B. Allow HTTP traffic only before authentication and block all the traffic.
• C. Allow SNMP traffic only before authentication and block all the traffic.
• D. Allow all the traffic before authentication and intercept HTTP only.
• E. Allow HTTPs traffic only before authentication and block all other traffi

Answer: BD

NEW QUESTION 15
An engineer wants to identify historical data collected by the Cisco MSE on rogue access points over the past two years. If the Cisco MSE is configured for maximum historical data retention, how many months can be searched?

• A. 24
• B. 36
• C. 6
• D. 12

Answer: D

NEW QUESTION 16
You are deploying a combination of Cisco Unified Wireless IP Phones 7921G and 7925G at your branch offices in a centralized call processing environment that requires high availability at branch locations. Which three components need to be verified before the wireless IP phones can be deployed? (Choose three.)

• A. Sufficient SRST license support at each branch location
• B. Support for local voice mail
• C. Branch gateways support MoH
• D. Properly configured QoS over the IP WAN links
• E. Support for single number reach
• F. Support for E.164 dialing
• G. Sufficient IP phone licenses in the Cisco Unified Communications Manager cluster

Answer: ADG

NEW QUESTION 17
An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.)

• A. static VLAN on client
• B. ACL
• C. AP group
• D. static IP on client
• E. MAC filtering
• F. RF group
• G. AAA override

Answer: CG

NEW QUESTION 18
Which two access categories could use TXOP value higher than 0, as per 802.11e standard? (Choose two.)

• A. AC_VO
• B. AC_BK
• C. AC_VI
• D. AC_BE
• E. AC_NC

Answer: AC

Explanation:
Reference:
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/WANQoS.pdf

NEW QUESTION 19
Which two parameters are used by MSE location analytics to determine the behavior of a Wi-Fi device?
(Choose two.)

• A. the transmit power
• B. the Wi-Fi channel
• C. the dwell time
• D. the path choice
• E. Layer 2 roaming

Answer: CD

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/3350/7-4/Location_Analytics_Service/Guide/ Cisco_Location_Analytics_Service_Configuration_Guide/Location_analytics_overview.html

NEW QUESTION 20
What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN Controller?

• A. 30Seconds
• B. 15 Seconds
• C. 10 Seconds
• D. 60 Seconds

Answer: B

NEW QUESTION 21
Which is the recommended maximum number of hop counts to support data clients on a wireless indoor mesh network?

• A. 4
• B. 2
• C. 1
• D. 6

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-mesh/111451-indoormeshdeployguide- 00.html

NEW QUESTION 22
A network engineer must configure a 5 GHz network to allow for the greatest density of radios possible with the least amount of co-channel interference. Which configuration best fulfills this requirement?

• A. Set 802.11 h Local Power constraint to 25 dBm.
• B. Set DCA to 20 MHz channels and enable Extended UNII-2 channels.
• C. Enable Event Driven RRM in 5 GHz with a sensitivity of High, n
• D. Configure TPC Power Threshold to -80 dBm and set interference Optimal Mode (TPCv2).

Answer: B

NEW QUESTION 23
A wireless engineer wants to enable optimized roaming for their 5GHz wireless network with these settings: -72dBm RSSI value, 25% coverage exception level percentage, and a minimum of 50 packets received.
Which two commands achieve these settings? (Choose two.)

• A. config advanced 802.11a coverage data fail-percentage 25
• B. config advanced 802.11b optimized-roaming enable
• C. config advanced 802.11b coverage data rssi-threshold -72
• D. config advanced 802.11a optimized-roaming enable
• E. config advanced 802.11a coverage data rssi-threshold -72

Answer: AD

NEW QUESTION 24
......