Microsoft 70-698 Study Guides 2021

NEW QUESTION 1
You have a Key Management Service (KMS) host and an administrative workstation named Computer1. From Computer1, you need to validate the activation status on a computer named Computer2.
What should you run?

• A. Get-RDLicenseConfiguration computer2
• B. slmgr.vbs computcr2 /dlv
• C. winrs.exe -r:Computer2 netdom.exe
• D. ospp.vbs /tokact:computer2

Answer: B

Explanation: http://www.howtogeek.com/245445/how-to-use-slmgr-to-change-remove-or-extend-your-windows-license/

NEW QUESTION 2
You have a computer named Computer1 that runs Windows 10. Computer1 is infected by a virus.
You fail to access the Settings app on Computer1 due to the virus.
You need to restart the computer and ensure that Computer1 displays the advanced startup options when the computer restarts.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

• A. From Windows PowerShell, runRestart-Computer Computer1 - Wait - For PowerShell.
• B. From System Configuration select safe boot select minimal, and then click Restart from the Start menu.
• C. From system Configuration, select selective startup, and then click Restart from the start menu.
• D. From a command prompt, run shutdown.exe /r/o.
• E. From Power on the start menu, hold the SHIFT key while you click Restart.

Answer: DE

Explanation: https://support.microsoft.com/en-us/instantanswers/f40a95aa-1e34-4907-98ba-a308fd10a786/get-to-safe-mode-a
http://www.howtogeek.com/126016/three-ways-to-access-the-windows-8-boot-options-menu/

NEW QUESTION 3
You are the system administrator for a company. All devices run Windows 10 Pro.
An executive asked id voice commands could be used with their computer to access weather reports and set reminders.
You need to enable voice commands for the executive’s computer.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 4
You are using sysprep to prepare a system for imaging.
You want to reset the security ID (SID) and clear the event logs.
Which option should you use?

• A. /generalize
• B. /oobe
• C. /audit
• D. /unattend

Answer: A

Explanation: Generalize prepares the Windows installation to be imaged.
If this option is specified, all unique system information is removed from the Windows installation. The security ID (SID) resets, any system restore points are cleared, and event logs are deleted.
The next time the computer starts, the specialize configuration pass runs. A new security ID (SID)is created, and the clock for Windows activation resets, if the clock has not already been reset three times.

NEW QUESTION 5
You have a computer named Computer1 that runs Windows 10. Computer1 has a printer named Printer1 installed.
You need to configure the settings of Printer1 remotely from another computer. Which tool should you use on the remote computer?

• A. Device Manager from Control Panel
• B. Print Management from Administrative Tools
• C. Printers & scanners from the Setting app
• D. Devices and Printers from Control Panel

Answer: B

Explanation: https://technet.microsoft.com/en-us/library/cc753109(v=ws.10).aspx
http://www.howto-connect.com/print-management-tool-in-windows-10/

NEW QUESTION 6
You have four computers configured as shown in the following table:

You need to deploy Windows 10 Enterprise. The deployment must support Miracast, BitLocker Drive Encryption (BitLocker), and Windows Hello with facial recognition.
On which computer should you install Windows 10?

• A. Computer1
• B. Computer2
• C. Computer3
• D. Computer4

Answer: B

Explanation: https://www.microsoft.com/en-za/windows/windows-10-specifications#sysreqs

NEW QUESTION 7
You have a computer named Computer1.
You obtain a new driver for a device installed on Computer1. The driver package is stored in C:Drivers and includes the following files:
*Driver.inf
*Driver.dil
*Drivet.sys
*Driver.cat
You need to install the driver on Computer1 by using File Explorer. Which file should you use to initiate the installation?

• A. Driver.sys
• B. Driver.dll
• C. Driver.cat
• D. Driver.inf

Answer: B

Explanation: http://lifehacker.com/269063/install-a-dll-file-in-windows

NEW QUESTION 8
You are the desktop administrator for a company. You plan to deploy Windows 10 Pro. You configure a single existing deployment image to use for all devices.
You purchase a newer device hardware model. You deploy the company image to a new device. You observe that there is no network connectivity and the device displays a stop error.
You need to prevent the stop error to continue troubleshooting the issue. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 9
Group Policy is a set of rules which control the working environment of user accounts and computer accounts. Group Policy provides the centralized management and configuration of operating systems, applications and users’ settings in an Active Directory environment.
In other words, Group Policy in part controls what users can and can’t do on a computer system. Which one of these policies requires a reboot?

• A. Turn off Windows Defender
• B. Turn off Autoplay for non-volume devices
• C. Disable Active Desktop
• D. Turn off Data Execution Prevention for Explorer

Answer: D

Explanation: A reboot is REQUIRED when turning off Data Execution Prevention (DEP) for Explorer.

NEW QUESTION 10
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table:

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA. The network contains a mainframe computer that is administered by using the Telnet protocol. The domain contains four client computers configured as shown in the following table:

All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements.
•Ensure that you can test unsigned device drivers on Computer1
•Enable Credential Guard on Computer2.
•Run commands and cmdlets remotely on computer2.
•Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
•Ensure that User1 can view and interact with a desktop session of User3.
•Ensure that User2 can use Telnet to manage the mainframe.
•Ensure that User4 can use Remote Desktop to access Computer4 remotely.
End of repeated scenario.
On Test_Server, you reset the password for User3. You need to ensure that User3 can access ShareA.
Which tool should you instruct User3 to use on Computer3?

• A. the Get-Credential cmdlet
• B. Credential Manager
• C. Authorization Manager
• D. Active Directory Users and Computers

Answer: B

Explanation: http://www.digitalcitizen.life/credential-manager-where-windows-stores-passwords-other-login-details

NEW QUESTION 11
You are the system administrator for a company. All devices run Windows 10. Employees use Microsoft OneDrive to sync files to their local devices by using Files On-Demand.
The human resources (HR) department has a folder named HRO and a folder named Reports. All files and subfolders of HRO are marked as Always keep on this device. All files and subfolders of Reports are marked Online-only.
An employee reports that they recently deleted a file in the Reports folder. You need to quickly restore the file. What should the user do?

• A. Use the settings option in the OneDrive sync client.
• B. Run the RestoreUev-Backup Windows PowerShell cmdlet and restore the file.
• C. Restore the file from the Recycle Bin on the desktop.
• D. Go to the OneDrive portal and restore the file from the Recycle Bin.

Answer: D

NEW QUESTION 12
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goats Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are manufacturing company. You are responsible for deploying and maintaining the computers for your company. The computers are running a verify of Windows operating systems.
You have been tasked with standardizing on Windows 10 Pro.
You need to determine the correct supported option for moving computer to Windows 10. Solution: Upgrade Windows 7 Professional RTM computers to Windows 10.
Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 13
You have a computer named Computer1 that has the following stored credentials:
Which two passwords can be viewed in clear text from Credential Manager on Computer1?

• A. the web credential for accessing the HTTPS URL
• B. the Windows credential for accessing the shared folder
• C. the Windows credential for accessing the HTTP URL
• D. the Windows credential for accessing Remote Desktop
• E. the web credential for accessing the HTTP URL

Answer: BD

Explanation: http://www.digitalcitizen.life/credential-manager-where-windows-stores-passwords-other-login-details

NEW QUESTION 14
You are using sysprep to prepare a system for imaging.
You want to reset the security ID (SID) and clear the event logs. Which option should you use?

• A. /generalize
• B. /oobe
• C. /audit
• D. /unattend

Answer: A

Explanation: https://msdn.microsoft.com/en-us/windows/hardware/commercialize/manufacture/desktop/sysprep-command-lin

NEW QUESTION 15
In this section, you will see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
You have a computer named Computer1 that runs Windows 10.
File History is turned on.
The user of Computer1 reports that previous versions of D:FolderFile1.doc are unavailable from the Previous Versions tab.
You need to ensure that the previous versions of the file are created. Solution: Modify the Backup settings in the Settings app.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: http://www.pcworld.com/article/2974385/windows/how-to-use-windows-10s-file-history-backup-feature.html

NEW QUESTION 16
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer that has a dual-boot configuration. Windows 10 Pro is installed on the local disk. Windows 10 Enterprise is installed in a VHDX file named Disk1.vhdx.
You start the computer to Windows 10 Pro, and then you download a driver package.
You need to ensure that the next time the Windows 10 Enterprise installation starts, the driver is installed already.
What should you run first?

• A. Add-WindowsImage
• B. bcdboot.exe
• C. bcdedit.exe
• D. bootcfg.exe
• E. bootim.exe
• F. bootsect.exe
• G. diskpart.exe
• H. Expand-WindowsImage

Answer: G

Explanation: https://technet.microsoft.com/en-us/library/dd799267(v=ws.10).aspx#BKMK_addDrivers

NEW QUESTION 17
You have a custom Microsoft Management Console (MMC) named Console 1 that contains several snapins. Users use Console1 to manage specific computer settings. Users report that every time they close Console1,
they are prompted to save the MMC.
You need to prevent the prompts to save Console1. What should you do?

• A. From the Details settings of the MMC file, modify the Authors property.
• B. From the File menu, click Add/Remove Snap-i
• C. and then click Edit Extensions.
• D. From the File menu, click Options and then modify the console mode.
• E. Horn the Security settings of the MMC file, modify the permissions.

Answer: C

Explanation: http://www.tech-recipes.com/rx/9467/how-to-create-custom-microsoft-management-consoles-mmcs-for-managi

NEW QUESTION 18
You have the following output from Windows PowerShell:

You need to start the service.
What command should you run first? To answer, select the appropriate options in the answer area.

Answer:

Explanation: *Box 1* Restart-Service
*Box 2*
$True
Restart-Service -Name Spooler$True
https://technet.microsoft.com/en-us/library/hh849823(v=wps.650).aspx

NEW QUESTION 19
You manage an Active Directory Domain Service (AD DS) domain for a company. All employee devices are joined to the domain. You have the following four domain controllers: DC01, DC02, DC03 and DC04. All employee devices are joined to the domain. You deploy Windows 10 Pro to all devices.
You are currently using volume activation. You experience Windows licensing activation issues with a computer named Computer01. You need to investigate the licensing issues for the problem computer. What should you do? To answer, configure the appropriate options in the dialog box in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 20
In this section, you will see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2.
User1 fails to access the Event Viewer logs on Computer2 from Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can use Event Viewer on Computer1 to remotely view the Event Viewer logs on Computer2.
Solution: You modify the Windows Firewall settings on Computer2. Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: https://technet.microsoft.com/en-us/library/cc766438(v=ws.11).aspx