Precise 70-698 Dumps 2021

NEW QUESTION 1
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA. The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table.

All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements.
•Ensure that you can test unsigned device drivers on Computer1
•Enable Credential Guard on Computer2.
•Run commands and cmdlets remotely on computer2.
•Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
•Ensure that User1 can view and interact with a desktop session of User3.
•Ensure that User2 can use Telnet to manage the mainframe.
•Ensure that User4 can use Remote Desktop to access Computer4 remotely.
End of repeated scenario.
You need to recommend a solution to meet the requirements of User1. What should you include in the recommendation?

• A. Remote Access Connection Manager
• B. Remote Desktop
• C. Remote Assistance
• D. Windows PowerShell Remoting

Answer: C

Explanation: http://www.technig.com/set-up-windows-remote-assistance/

NEW QUESTION 2
You have a computer named Computer1 that runs Windows 10.
Computer1 has two volumes named C and D. Volume C is formatted NTFS and volume D is formatted exFAT.
You need to ensure that you can recover files stored in D:Data. What should you use?

• A. System Restore points
• B. File History
• C. wbadmin.exe
• D. Backup and Restore (Windows 7)

Answer: B

Explanation: http://www.digitalcitizen.life/introducing-windows-8-how-backup-data-file-history

NEW QUESTION 3
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
Your network contains a single Active Directory domain. The domain contains a VPN server that supports all of the VPN protocols.
A user named User1 works from home and has a desktop computer that runs Windows 10 Pro. User1 has an application named App1 that requires access to a server on the corporate network. User1 creates a VPN connection on the computer.
You need to ensure that when User1 opens App1, App1 can access the required data. What should you do?

• A. Click Turn on password protected sharing.
• B. Disable Network Discovery.
• C. Modify the Profile settings of an incoming firewall rule.
• D. Run the Add-VpnConnectionTriggerApplication cmdlet.
• E. Run the New-NetFirewallRule cmdlet and specify the- Direction Outbound parameter.
• F. Run the New-VpnConnection cmdlet.
• G. Run the Set-NetConnectionProfile cmdlet.
• H. Run the Set-VPNConnection cmdlet.

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/dn296460(v=wps.630).aspx

NEW QUESTION 4
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains a single Active Directory domain named contoso.com. All computers are members of the domain and run the 64-bit version of Windows 10 Enterprise.
On a test computer named Computer_Test1, you pin several company-specific applications in a group named Contoso Apps, and then you export the start menu layout to a file named contoso.xml.
You install Client Hyper-V on a computer named Computer6. You identity the following requirements.
•Install the Hyper V feature on a computer named Computer1.
•Use virtual smart card authentication on a computer named Computer2.
•Enable Secure Boot on a computer named Computer3.
•Connect a computer named Computer4 to a projector by using Miracast.
•Ensure that a user named User 1 can use keyboard shortcuts by pressing one key at a time.
•Ensure that you can share the clipboard between Computer6 and the virtual machines running on Computer6.
•Add the Contoso Apps group to the Start menu of a computer named Computer7.
End of repeated scenario.
You install all of the Contoso apps on Computer7. You need to meet the requirements of Computer7. What should you do?

• A. Run the Import-StartLayout cmdlet.
• B. Copy Contoso.xml to the C:UsersDefaultStart menu folder.
• C. Configure the Start Menu and Taskbar settings in a Group Policy.
• D. Copy Contos
• E. xml to the C:ProgramDataMicrosoftWindowsStart Menu folder.

Answer: A

Explanation: https://blogs.technet.microsoft.com/deploymentguys/2021/03/07/windows-10-start-layout-customization/#Expor

NEW QUESTION 5
You are the administrator for a company. All devices run Windows 10 Enterprise. You receive reports about network configuration issues. You run the ipconfig command and receive the following results.

Use the drop-down menus to select the answer choice that answers each question. NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 6
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
A user connects to a wireless network and receives the following message:
"Do you want to allow your PC to be discoverable by other PCs and devices on this network?" The user clicks No.
The user is unable to browse to the shared folders of other computers on the network by using File E explorer. You need to ensure that the user can browse to the other computers.
What should you do?

• A. Click Turn on password protected sharing.
• B. Disable Network Discovery.
• C. Modify the Profile settings of an incoming firewall rule.
• D. Run theAdd-VpnConnectionTriggerApplicationcmdlet.
• E. Run the New-NetFirewallRule cmdlet and specify the -Direction Outbound parameter.
• F. Run the New-VpnConnection cmdlet.
• G. Run the Set-NetConnectionProfile cmdlet.
• H. Run the Set-VPNConnection cmdlet.

Answer: G

Explanation: https://technet.microsoft.com/en-us/library/jj899565(v=wps.630).aspx https://www.itechtics.com/change-network-type-windows-10/

NEW QUESTION 7
You are the administrator for a company. All devices run Windows 10 Enterprise. Users report that their Windows 10 systems are taking longer than normal to boot up.
You need to configure the Windows 10 systems to record the processes and services that are loaded and running during the boot process.
What should you do?

• A. Use the Task Manager tool to enable a boot log.
• B. Use the Task Manager Startup tab to list the process and services that run at startup.
• C. Use the Task Manager Services tab to list the services that start at boot.
• D. Use the System Configuration tool to enable a boot log.

Answer: D

Explanation: References: https://winaero.com/blog/enable-boot-log-windows-10/

NEW QUESTION 8
Your network contains a single Active Directory domain. The domain contains a computer that runs Windows 10.
You plan to use the computer to test applications.
You need to install Windows Insider Preview builds on the computer. What should you do?

• A. From Group Policy, configure the Add features to Windows 10 settings.
• B. From theSettings app, configure the Advanced options for Windows Update.
• C. From Group Policy, configure the Windows Update settings.
• D. From the Settings app, select Developer mode.

Answer: B

Explanation: http://www.howtogeek.com/224826/how-to-become-a-windows-insider-and-test-new-windows-10-features/

NEW QUESTION 9
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has storage configured as shown in the following table:

Pool1 contains a storage space named Space1 that is 300 GB. Pool3 contains a storage space named Space2 that is 100 GB. Pool2 is empty.
You need to add Disk7 to Pool1. What should you use first?

• A. Add-PhysicalDisk
• B. Diskpart
• C. New-VirtualDisk
• D. Remove-PhysicalDisk
• E. Resize-VirtualDisk
• F. Set-StoragePool
• G. Subst
• H. Update-Disk

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/hh848697(v=wps.630).aspx

NEW QUESTION 10
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has a virtual hard disk (VHD) named Disk1.vhdx. You plan to configure Computer1 for dual boot from Disk1.vhdx.
You need to install Windows on Disk1.vhdx by using dism.exe. What should you nm before you install Windows?

• A. Add-Windows Image
• B. bcdboot.exe
• C. bcdedit.exe
• D. bootcfg.exe
• E. bootim.exe
• F. bootsect.exe
• G. diskpart.exe
• H. Expand-Windows Image

Answer: G

Explanation: https://msdn.microsoft.com/en-us/windows/hardware/commercialize/manufacture/desktop/boot-to-vhd--native-b

NEW QUESTION 11
You have a computer named Computer1 that has a shared folder named Share1. Share1 has the permissions configured as shown in the following table:

You need to ensure that User1 can change files in Share1. User1 must be prevented from deleting files created by other users.
How should you configure the permissions? To answer, select the appropriate options In the answer area.

Answer:

Explanation: Box1: NTFS
Box2: Modify

NEW QUESTION 12
In this section, you will see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2. User1 fails to remotely manage the devices on Computer2 by using Device Manager on Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can disable a device on Computer2 remotely. Solution: You modify the Windows Firewall settings on Computer2.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 13
You are the administrator for a company. All devices run Windows 10 Enterprise build 1703.
You plan to deploy Windows Hello for Business to all devices. You must use Microsoft Azure Active Directory (Azure AD) and manage the devices with Microsoft Intune.
During the deployment process, all devices must be automatically enrolled in mobile device management (MDM) when the device is joined to Azure AD.
You need to ensure that devices are automatically enrolled in MDM. What should you do?

• A. Configure Azure Multi-Factor Authentication for the user accounts
• B. Update the Windows 10 devices to build 1709.
• C. Obtain an Azure AD Premium license for each user account.
• D. Implement Active Directory Federation Services (AD FS) with an on-premises Active Directory Domain Services (AD DS) environment.

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows/client-management/mdm/enroll-a-windows-10-device-automatically-

NEW QUESTION 14
You are the administrator for a company. All devices run Windows 10 Enterprise and are joined to an Active Directory Domain Services domain.
Administrators are unable to test network connectivity to Windows 10 devices because ping is being blocked. You need to be able to ping the devices.
Solution: Turn on File and Printer Sharing in the Advanced Sharing settings. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 15
Your network contains a single Active Directory domain. The domain contains two computers named Computer1 and Computer2.
From Computer1, you need to view the installed devices and their associated drivers on Computer2. What should you use?

• A. the Get-PnpDevice cmdlet
• B. the Get-WindowsDriver cmdlet
• C. the Get-OdbcDriver cmdlet
• D. the driverquery.exe command

Answer: D

Explanation: https://blogs.technet.microsoft.com/askperf/2011/10/21/two-minute-drill-driverquery-exe/

NEW QUESTION 16
You have a computer that has a local printer. You need to share the printer.
Which two tools can you use to achieve the goal? Each correct answer presents a complete solution.

• A. net share from a command prompt
• B. Devices and Printers from Control Panel
• C. Set-PrintConfiguration from Windows PowerShell
• D. Set-Printer from Windows PowerShell
• E. Printers & scanners from the Settings app

Answer: BD

Explanation: http://www.addictivetips.com/windows-tips/how-to-share-a-usb-printer-over-your-network-in-windows-10/
https://technet.microsoft.com/en-us/library/hh918366(v=wps.630).aspx

NEW QUESTION 17
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1.
Computer1 has a virtual hard disk (VHD) named Disk1.vhdx. Disk1.vhdx has an NTFS partition, which is visible in File Explorer as drive E.
You need to apply a Windows 10 image to drive E. What should you run?

• A. Add-WindowsImage
• B. bcdboot.exe
• C. bcdedit.exe
• D. bootcfg.exe
• E. bootim.exe
• F. bootsect.exe
• G. diskpart.exe
• H. Expand-WindowsImage

Answer: A

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than once correct solution, while others might not have a correct solution.
A company has a client device that runs Windows 10 Pro. The device has a folder named Folder1. The folder is configured using the following settings:

A user reports that they cannot change documents when accessing them over the network. You need to ensure that the users can change documents in the folder.
Solution: You set the Users group NTFS permission to Full Control. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 19
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2. User1 fails to access the Event Viewer logs on Computer 2 from Computer 1.
User1 can connect to Computed remotely by using Computer Management.
You need to ensure that User1 can use Event Viewer on Computer1 to remotely view the Event Viewer logs on Computer 2.
Solution: You run winrm quick config on Comparer2. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: https://technet.microsoft.com/en-us/library/ff700227.aspx

NEW QUESTION 20
A company has client devices that run Windows 10 Enterprise. A line-of-business (LOB) app requires that Windows feature updates are tested for up to one year before being deployed. Company policy states that all devices must be updated at least once per year.
You need to ensure that Windows feature updates meet the LOB app requirements. Which update path should you configure on client devices?

• A. Long-Term Servicing Channel В. Slow RingС. Semi-Annual Channel
• B. Release Preview Ring

Answer: B

Explanation: References: https://docs.microsoft.com/en-us/windows/deployment/update/waas-overview#servicing-tools