Realistic 70-698 Braindumps 2021

NEW QUESTION 1
company manages Windows 8.1 Pro and Windows 10 Pro client devices by using Group Policy objects (GPOs). The company plans to migrate from GPOs to mobile device management (MDM) policies.
You need to create an HTML report of the GPO settings that are cross-referenced with supported MDM policies.
Solution: You run DISM on the client computers and generate a report. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 2
You deploy a new computer named Computer1.
You have a file named Data.docx that is stored in Microsoft OneDrive.
From File Explorer, you attempt to open Data.docx, but you discover that the file is corrupt. You need to access a previous version of Data. docx.
What should you use?

• A. File History
• B. the Recycle Bin
• C. One Drive online
• D. Backup and Restore (Windows 7)

Answer: A

NEW QUESTION 3
You have a computer named Computer1 that runs the 64-bit version of Windows 10 Pro.
You obtain a new driver for a device installed on Computer1. The driver is not digitally signed. You need to test the installation of the driver on Computer1.
What should you do first?

• A. Run dism.exe and specify the /Add-Driver and /Force-Unsigned parameters.
• B. From User Configuration in Group Policy, configure the Driver Installation settings.
• C. Restart Computer1 by using the advanced startupoptions.
• D. From Computer Configuration in Group Policy, configure the Driver Installation settings.

Answer: C

Explanation: http://en.code-bude.net/2015/08/19/how-to-install-unsigned-drivers-in-windows-10/

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than once correct solution, while others might not have a correct solution.
A company has a client device that runs Windows 10 Pro. The device has a folder named Folder1. The folder is configured using the following settings:

A user reports that they cannot change documents when accessing them over the network. You need to ensure that the users can change documents in the folder.
Solution: You set the Everyone group share permission to Full Control. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 5
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
Your network contains a single Active Directory domain. The domain contains computers that run Windows 10 Enterprise.
The computers are configured as shown in the following table:

When User1 works remotely, the user fails to access shared folders on the corporate network.
When User 2 and User3 work remotely, they successfully connect to the shared folders on the corporate network.
You need to ensure that User1 can connect to the shared folders without user interaction. What should you do?

• A. Click Turn on password protected sharing.
• B. Disable Network Discovery.
• C. Modify the Profile settings of an incoming firewall rule.
• D. Run the Add-VpnConnectionTriggerApplication cmdlet.
• E. Run the New-NetFirewallRule cmdlet and specify the -Direction Outbound parameter.
• F. Run the Ncw-VpnConnection cmdlet.
• G. Run the Set-NetConnectionProfile cmdlet.
• H. Run the Set-VPNConnection cmdlet

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/dn296460(v=wps.630).aspx

NEW QUESTION 6
You purchase licenses for several apps from the Windows Store and you list the apps in your Windows Store for Business.
You need to tell users how to install the apps. What should you instruct the users to use?

• A. the Windows Store app and a Microsoft account
• B. a web browser and a Microsoft Azure Active Directory (Azure AD) account
• C. the Windows Store app and a Microsoft Azure Active Directory (Azure AD) account
• D. a web browser and a Microsoft account

Answer: C

Explanation: https://technet.microsoft.com/en-us/itpro/windows/manage/distribute-apps-from-your-private-store

NEW QUESTION 7
Your network contains a single Active Directory domain named contoso.com. The domain contains a computer named Computer1.
You have five users configured as shown in the following table:

Which two users can add a Microsoft account to their Windows account, and then sign in to Cumputer1 by using the Microsoft account?

• A. User1
• B. User2
• C. User3
• D. User4
• E. User5

Answer: DE

Explanation: http://blog.thefullcircle.com/2015/07/win10-ad-and-microsoft-account-synchronisation/

NEW QUESTION 8
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA. The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table.

All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements.
•Ensure that you can test unsigned device drivers on Computer1
•Enable Credential Guard on Computer2.
•Run commands and cmdlets remotely on computer2.
•Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
•Ensure that User1 can view and interact with a desktop session of User3.
•Ensure that User2 can use Telnet to manage the mainframe.
•Ensure that User4 can use Remote Desktop to access Computer4 remotely.
End of repeated scenario.
You need to meet the requirement for administering Computers remotely. Which remote management technology should you use?

• A. Windows PowerShell remoting
• B. Telnet
• C. C.Ps Exec
• D. Remote Desktop

Answer: B

Explanation: https://technet.microsoft.com/en-us/library/bb491013.aspx

NEW QUESTION 9
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has a dual-boot configuration. Computer1 has Windows 8.1 and Windows 10 installed.
You need to configure Computer1 to use only 4 GB of RAM when the computer starts in Windows 10. What should you run?

• A. Add-WindowsImage
• B. bcdboot.exe
• C. bcdedit.exe
• D. bootcfg.exe
• E. bootim.exe
• F. bootsect.exe
• G. diskpart.exe
• H. Expand-WindowsImage

Answer: C

Explanation: https://technet.microsoft.com/en-us/library/cc709667(v=ws.10).aspx

NEW QUESTION 10
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario exactly the same in each question in this series.
Start of repeated scenario
Your network contains a single Active Directory domain named contoso.com. All computers are members of the domain and run the 64-bit version of Windows 10 Enterprise.
On a test computer named Computer_Test1, you pin several company-specific applications in a group named Contoso Apps, and then you export the start menu layout to a file named contoso.xml.
You install Client Hyper-V on a computer named Computer6. You identity the following requirements.
•Install the Hyper V feature on a computer named Computer1.
•Use virtual smart card authentication on a computer named Computer2.
•Enable Secure Boot on a computer named Computer3.
•Connect a computer named Computer4 to a projector by using Miracast.
•Ensure that a user named User 1 can use keyboard shortcuts by pressing one key at a time.
•Ensure that you can share the clipboard between Computer6 and the virtual machines running on Computer6.
•Add the Contoso Apps group to the Start menu of a computer named Computer7.
End of repeated scenario.
Which hardware feature must Computer3 support.

• A. Data Execution Prevention (DEP)
• B. Unified Extensible Firmware Interface (UEFI)
• C. Trusted Platform Module (TPM)
• D. Second LevelAddress Translation (SLAT)

Answer: B

Explanation: https://www.microsoft.com/en-us/windows/windows-10-specifications

NEW QUESTION 11
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains a single Active Directory domain named contoso.com. All computers are members of the domain and run the 64-bit version of Windows 10 Enterprise.
On a test computer named Computer_Test1, you pin several company-specific applications in a group named Contoso Apps, and then you export the start menu layout to a file named contoso.xml.
You install Client Hyper-V on a computer named Computer6. You identity the following requirements.
•Install the Hyper V feature on a computer named Computer1.
•Use virtual smart card authentication on a computer named Computer2.
•Enable Secure Boot on a computer named Computer3.
•Connect a computer named Computer4 to a projector by using Miracast.
•Ensure that a user named User 1 can use keyboard shortcuts by pressing one key at a time.
•Ensure that you can share the clipboard between Computer6 and the virtual machines running on Computer6.
•Add the Contoso Apps group to the Start menu of a computer named Computer7.
End of repeated scenario.
You need to meet the requirement of Computer6. What should you configure?

• A. NUMA spanning
• B. enhanced session mode
• C. Hyper-V Guest Service Interface
• D. RemoteFX

Answer: B

Explanation: https://technet.microsoft.com/en-us/windows-server-docs/compute/hyper-v/learn-more/use-local-resources-on-h

NEW QUESTION 12
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have 10 computers that run Windows 10 Pro. The computers are in a workgroup.
A computer named PC_User1 has shared folder named Share1. Users are not prompted for credentials when they access Share1.
You modify the permissions on Share1 so that the share is shared only to a user named User1.
You need to ensure that when users from other computers in the workgroup access Share1, they must authenticate by using the credentials of User1.
What should you do?

• A. Click Turn on password protected sharing.
• B. Disable Network Discovery.
• C. Modify the Profile settings of an incoming firewall rule.
• D. Run the Add-VpnConnectionTriggerApplication cmdlet.
• E. Run the New-NetFirewallRule cmdlet and specify the- Direction Outbound parameter.
• F. Run the New-VpnConnection You modify to ensure thta cmdlet.
• G. Run the Set-NetConnectionProfile cmdlet.
• H. Run the Set-VPNConnection cmdlet.

Answer: A

Explanation: http://www.isunshare.com/windows-10/turn-off-or-on-password-protected-sharing-in-windows-10.html

NEW QUESTION 13
A company has client computers that run Windows 10. Each computer has two hard drives.
You need to create a dynamic volume on each computer that maximizes write performance with data fault tolerance.
Which kind of dynamic volume should you create?

• A. Striped Volume
• B. RAID 5 Volume
• C. Spanned Volume
• D. Mirrored Volume

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/cc737048(v=ws.10).aspx#w2k3tr_ddisk_what_zcub.

NEW QUESTION 14
You are the administrator for a company. All devices run Windows 10 Enterprise.
Client Hyper-V is enabled on some devices. You need to verify how the Hyper-V settings are configured for a specific virtual machine (VM) on one of the devices.

Use the drop-down menus to select the answer choice that answers each question. NOTE: Each correct selection is worth one point.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/checkpoints https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-R2-and-2012/dn2822

NEW QUESTION 15
You have a computer named Computer1 that runs Windows 10 Enterprise. Computer1 is configured to receive Windows updates from the Internet.
If a user is logged on to Computer1, you need to prevent Computer1 from automatically restarting without the logged on user’s consent after the installation of the Windows updates.
What should you do?

• A. Enable the Defer upgrades setting.
• B. Edit the Automatic App Update scheduled task.
• C. Configure the Choose how updates are delivered setting.
• D. Configure the Choose how updates are installed setting.

Answer: D

Explanation: In the Choose how updates are installed setting, you can use the drop-down menu to choose an option:
The Schedule a restart option will allow the user to choose when the computer is restarted. Of the answers given, this is the only way to prevent Computer1 from automatically restarting without the logged on user’s consent after the installation of the Windows updates.

NEW QUESTION 16
You have a Windows 10 Enterprise computer named Computer1. Computer1 has File History enabled. You create a folder named Folder1 in the root of the C: drive.
You need to ensure that Folder1 is protected by File History.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

• A. From File Explorer, include Folder1 in an existing library.
• B. Modify the Advanced settings from the FileHistory Control Panel item.
• C. From the Settings app, modify the Backup options.
• D. From File Explorer, modify the system attribute of Folder1.

Answer: AC

Explanation: By default, File History backs up all libraries. We can therefore ensure that Folder1 is protected by File History by adding the folder to a library.
The second method of ensuring that Folder1 is protected by File History is to add the folder location to File History. You do this by modifying the Backup options, not the File History Control Panel item as you might expect. In the Settings app, select Update & Security then Backup. Under the Back up using File History heading, select the Add a drive option.

NEW QUESTION 17
You have a computer named Computer1 that runs Windows 10. Device Manager on Computer1 is configured as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use Communications Port (COM1). What should you do?

• A. Update the driver for Communications Port (COM1).
• B. Attach a device to Communications Port (COM1), and then click Scan for hardware changes.
• C. Enable Communications Port (COM1).
• D. Modify the IRQ and the I/O Range for Communications Port (COM1).

Answer: C

Explanation: https://support.microsoft.com/en-us/help/819036/overview-of-the-comdisable-tool

NEW QUESTION 18
Your organization has a shared OneDrive for Business location with video files used for self-paced training. When users attend the training, they synchronize files from the OneDrive for Business location to their computers.
A user named User1 is fired from the company and maliciously deleted all files that were on the local machine, causing all files on OneDrive for Business and synchronized to all users' deleted.
User1 also emptied the recycle bin on the local machine. You need to restore the video files.
What should you do?

• A. Restore the files by using the Clear-RecycleBin Windows PowerShell cmdlet.
• B. Restore the files from another computer's recycle bin.
• C. Restore the files from the OneDrive for Business recycle bin.
• D. Restore the files from the second stage OneDrive for Business recycle bin.

Answer: C

Explanation: You should restore the files from the OneDrive for Business recycle bin. When synchronized files are deleted locally, it also triggers a delete operation on OneDrive for Business and on all machines connected to the same share.
You should not restore the files by using the Clear-RecycleBin Windows PowerShell cmdlet. This cmdlet would attempt to empty the local recycle bin again.
You should not restore the files from another computer's recycle bin. When the delete operation is triggered from OneDrive for Business, files are not placed in the recycle bin of the local machines.
You should not restore the files from the second stage OneDrive for Business recycle bin. The user never cleared the recycle bin in OneDrive for Business, so the files would not have ended up in the second stage recycle bin.
References:
https://support.office.com/en-us/article/restore-deleted-files-or-folders-in-onedrive-949ada80-0026-4db3-a953-c

NEW QUESTION 19
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2. User1 fails to remotely manage the devices on Computer2 by using Device Manager on Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can disable a device on Computer2 remotely.
Solution: You enable the Allow remote access to the Plug and Play interface Group Policy setting on Computer2.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: http://winintro.com/?Category=Windows_10_2021
&Policy=Microsoft.Policies.DeviceInstallation%3A%3ADeviceManagement_RPCInterface_Allow

NEW QUESTION 20
A user has a laptop named Computer 1 that runs Windows 10 and has a 64-bit application named App1 installed.
App1 fails to launch and generates an error message indicating that the application is not supported on this version of Windows.
You need to ensure that App1 can run successfully. What should you do?

• A. Create a package that includes App1 by using the Windows Imaging and Configuration Designer (Windows ICD).
• B. Create a fix in the Compatibility Administrator.
• C. Run App1 in the Standard User Analyzer (SUA).
• D. Use the Application Compatibility Manager (ACM) to create aninventory package.

Answer: B

Explanation: https://msdn.microsoft.com/en-us/library/windows/desktop/dd744763(v=vs.85).aspx