Top Tips Of Most Up-to-date Hpe6-a41 Test Question

NEW QUESTION 1
A network administrator wants to download a configuration from an ArubaOS switch. The administrator does not have local access to the switch and wants to copy the configuration in a secure manner that prevents eavesdroppers from reading the configuration. Which two options can the administrator use to copy the configuration?

• A. SFTP and HTTPS
• B. ZModem and SFTP
• C. HTTPS and TFTP
• D. HTTPS and ZModem

Answer: A

NEW QUESTION 2
A Virtual Switching Framework (VSF) fabric is configured to use LLDP-MAD.
Which action does the standby member take if it sends a probe but receives no response?

• A. It sends a request packet to the commander to determine which ports should remain active.
• B. It continues to function and assumes the role of commander.
• C. It automatically changes its status to MAD inactive fragment.
• D. It requests that the commander change its status to MAD inactive fragment.

Answer: A

NEW QUESTION 3
A company requires switches to use MSTP instead of RSTP, so that the switches can forward traffic on more than one switch-to-switch link. How does the administrator set up the solution to meet this requirement?

• A. Set the same spanning tree cost on all redundant links on a switch.
• B. Ensure that switches use the 802.3t standard costs instead of the legacy costs.
• C. Map different VLANs to different instances, and make a different switch root bridge in each instance.
• D. Configure every switch with a unique bridge propriety in the IST, which is also called spanning tree instance 0.

Answer: C

NEW QUESTION 4
Which technology can provide automated network optimization for unified communication applications such as Skype for Business?

• A. Software-defined Networking (SDN)
• B. Zero Touch Provisioning (ZTP)
• C. Simple Network Management Protocol (SNMP)
• D. Virtual Switching Framework (VSF)

Answer: A

NEW QUESTION 5
Managers log in to an ArubaOS switch with SSH.
What does SSH require to authenticate the switch to the SSH client and set up a secure session?

• A. an SSH authorized user key, managed by the ip ssh public-key commands
• B. a username and password set with the password manager command
• C. an SSH key, managed by the crypto key ss commands.
• D. a self-signed certificate configured with the crypto key commands

Answer: B

NEW QUESTION 6
How can a network administrator configure an ArubaOS switch to automatically assign the correct tagged VLANs to a port when an Aruba AP connects to that port?

• A. Configure the tagged VLANs in the device profile and apply that profile to the port.
• B. Configure a MAC-to-VLAN mapping policy and enable MAC-based VLANs on the port.
• C. Enable Zero Touch Provisioning (ZTP) on the switch.
• D. Enable LLDP MED globally and on the switch port.

Answer: A

NEW QUESTION 7
A network administrator just received two switches and wants to use the plug-and-play method to establish a Virtual Switching Framework (VSF) fabric with the fewest steps possible.
What must the administrator do to establish the fabric in this way?

• A. Configure a VSF link on the commander, and enable VSF on the standby member.
• B. Configure a VSF link on the commander, and enable VSF on me commander.
• C. Enable VSF on both the commander and the standby member.
• D. Configure a VSF link on both the commander and the standby member.

Answer: B

NEW QUESTION 8
Refer to the exhibit.

A company has an existing Aruba Instant cluster with several Instant APs (IAPs), as shown in the exhibit. The network administrator orders a new IAP and boots it for the first time by connecting it to the PoE switch port shown in the exhibit.
What happens after the IAP boots?

• A. The IAP attempts to contact AirWav
• B. If it is able to reach AirWave and obtain the current VC (master) IP address, it joins the cluster.
• C. The IAP fails to join the cluster because the administrator has not yet connected to its Instant SSID andprovisioned it.
• D. The IAP undergoes an election process with the current VC (master). It takes the VC role if it has a higher MAC address unless the current VC is configured as the preferred VC.
• E. The IAP hears the messages from the current VC (master), and it joins the cluster without the occurrence of a new election.

Answer: A

NEW QUESTION 9
A network administrator wants to use Aruba AirWave to manage Aruba 3810 Series switches deployed at the campus access layer. How does AirWave determine which configuration template to apply to these switches?

• A. based on their group
• B. based on their lowest level subfolder
• C. based on their top level folder
• D. based on the global group associated with their group

Answer: D

NEW QUESTION 10
A network administrator wants to disable physical interfaces 13-24 on an ArubaOS switch. How can the administrator do this?

• A. Assign the range of interfaces to a VLA
• B. Then, disable the VLAN.
• C. Create a named range for interfaces 13-24. Then, disable the named range.
• D. Create a named port group for interfaces 13-24. Then, disable the named port group.
• E. Use the interface disabl comman
• F. Specify 13-24 for the ID.

Answer: D

NEW QUESTION 11
A network administrator implements a wireless network that uses three wireless APs. The administrator wants to ensure that users can roam seamlessly from one AP to another. Which type of wireless network should the administrator implement?

• A. an ad hoc network that does not use channel bonding
• B. an infrastructure network with a different Service Set Identifier (SSID) on each AP
• C. an ad hoc network that uses channel bonding
• D. an infrastructure network with the same Service Set Identifier (SSID) on each AP

Answer: D

NEW QUESTION 12
Refer to the exhibit.

This switch currently assigns all VLANs to MSTP instance 0 or the Internal Spanning Tree (IST). Which statement correctly describes interface 21?

• A. The interface is down at Layer 2; it is not available for sending or receiving any traffic.
• B. The interface does not forward or accept data traffic, but it is ready to start forwarding if interface 19 fails.
• C. The interface is an edge port but has received Bridge Protocol Data Units (BPDUs), so it is disabled.
• D. The interface does not support spanning tree: it is possible that it will introduce a loop in the network.

Answer: B

NEW QUESTION 13
Refer to the exhibit.

What should the network administrator do to permit Switch-1 to route traffic from a client in 10.1.11.0/24 to a client in 10.1.12.0/24?

• A. Enable proxy ARP.
• B. Enable IP routing.
• C. Configure a static route to 10.1.11.0/24 and a static route to 10.1.12.0/24.
• D. Enable OSPF routing on VLAN 11 and on VLAN 12 in the same area.

Answer: B

NEW QUESTION 14
Why would a network administrator use strict provisioning to configure the standby member in a Virtual Switching Framework (VSF) fabric?

• A. The network administrator wants to control which device can join the VSF fabric.
• B. The network administrator needs to configure the correct domain ID on the standby member before this member joins the VSF fabric.
• C. The network administrator wants to ensure the standby member is configured with the same settings as the commander.
• D. The network administrator does not know the MAC address of the standby member.

Answer: A

NEW QUESTION 15
Refer to the exhibit.
Exhibit 1.

Exhibit 2.

The administrator enters the show spanning-tree instance 2 command on Switch-3 and sees the output shown in Exhibit 2.
What could explain the output results?

• A. Switch-1 has a lower MAC address than Switch-2.
• B. Switch-1 has a higher MAC address than Switch-2.
• C. Switch-3 filters BPDUs on port 26.
• D. Switch-3 has incompatible MSTP region settings with other switches.

Answer: D

NEW QUESTION 16
A network administrator wants to place desktops connected to an ArubaOS switch in VLAN5. The desktops have no awareness of VLANs. How should the administrator assign desktops to the VLAN?

• A. Make switch ports connected to desktops tagged members of VLAN5.
• B. Make VLAN5 the Default VLAN on the switch before the desktops connect to the switch ports.
• C. Make VLAN5 the Primary VLAN on the switch.
• D. Make switch ports connected to desktops untagged members of VLAN5.

Answer: D

NEW QUESTION 17
A Virtual Switching Framework (VSF) fabric currently has two members and two physical 10GbE links in its VSF link.
Which administrative task can a network administrator perform on this VSF fabric when both members are online?

• A. Remove a VSF member.
• B. Add a new 40GbE link to the VSF link.
• C. Remove one of the physical links in the VSF link.
• D. Change the VSF link to use 40GbE links instead of 10GbE links.

Answer: A

NEW QUESTION 18
Refer to the exhibit.

Which feature should the network administrator configure on the Virtual Switching Framework (VSF) fabric to prevent issues if Links 1 and 2 fail?

• A. Graceful OSPF (non-stop forwarding)
• B. Multi-Active Detection (MAD)
• C. Distributed trunking
• D. Virtual Router Redundancy Protocol (VRRP)

Answer: B

NEW QUESTION 19
What is one benefit that Aruba AirWave can provide to a customer with ArubaOS switches?

• A. It can audit switch firmware (software) and automate updates.
• B. It can enable the switches to provide mobility controller functions for connected Instant APs (IAPs).
• C. It can provide centralized authentication and authorization for users who log in to the switch CLI.
• D. It can program the switches to dynamically adjust QoS settings to prioritize Skype for Business traffic.

Answer: A

NEW QUESTION 20
Refer to the exhibit.
Exhibit 1.

Exhibit 2.

A network administrator needs to set up DHCP relay in a switched network comprised of ArubaOS switches. Switch A and Switch B have the IP settings in Exhibit 2, and no static or dynamic routes. Switch B is the DCHP server’s default gateway. The administrator correctly configures the IP helper address on Switch A. However, when the DHCP client attempts to acquire an IP address in VLAN 10, the process fails.
What does the administrator need to do to solve this problem?

• A. Configure a static route on Switch A, and enable IP Helper on Switch B.
• B. Configure a static route on Switch A.
• C. Configure a static route on Switch A and Switch B, and enable IP Helper on Switch B.
• D. Configure a static route on Switch A and Switch B.

Answer: D

NEW QUESTION 21
An interface on an ArubaOS switch did not receive any BDPUs and has the spanning tree auto-edge setting. What describes the effect of this setting?

• A. The interface has spanning tree disabled on it and ignore BPDUs.
• B. The interface remains forwarding during topology changes.
• C. The interface root path cost is automatically set to 0.
• D. The interface is preferred to be selected as master port.

Answer: B

NEW QUESTION 22
......