Precise HPE6-A44 Faq 2021

NEW QUESTION 1
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?

• A. PAPI
• B. SNMP
• C. VRRP
• D. IPSec

Answer: B

NEW QUESTION 2
An administrator defines credentials in the Mobility Master> Configuration> System section to configure a Mobility Master (MM). The administrator then accesses AirWave and adds the MM in Monitor-Only mode. The administrator expects AirWave to automatically discover the Aruba Virtual Mobility Controllers (VMCs) also managed by the MM, but does not see these under APs/Devices> New section in AirWave.
What should the administrator do to solve this problem?

• A. Enable Automatic Device Authorization for the Group the Mobility Master belongs to in AirWave.
• B. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and then scan for the Virtual Mobility Controllers in AirWave.
• C. Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.
• D. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and have AirWave repoll the Mobility Master.

Answer: C

NEW QUESTION 3
An administrator manages an Aruba wireless network. Users authenticate to the wireless network using PEAP, where their credentials are validated by the controller’s local database. The company purchases Android tablets to use with an inventory tracking system. The administrator notices that many of the users of these devices use their normal username and password to authenticate, which allows the tablet to access all resources that the user can access from their wireless computers. This is a security violation.
Which Aruba Mobility Controller (MC) feature should the administrator configure to restrict tablet access to a web portal for authentication, where an appropriate post-authentication policy can be applied to these tablets?

• A. AirMatch
• B. AP fingerprinting
• C. Server-derived roles
• D. User-derived rules

Answer: C

NEW QUESTION 4
An administrator wants to implement the MultiZone feature in a company’s network to segregate corporate and guest traffic. Corporate traffic will have APs establish connections to a cluster managed by a Mobility Master (MM), and guest traffic will have the same APs establish connections to a standalone controller at the company’s DMZ.
Given this scenario, what is true about the implementation of Multizone?

• A. A management session is established only with the primary zone, but data sessions are established to all zones.
• B. Only the primary zones can reboot, upgrade, or provision MultiZone APs.
• C. The primary and data zones must be in the same L2 subnet.
• D. A MultiZone AP can initially connect to any zone to obtain its configuration.

Answer: D

NEW QUESTION 5
Which configuration command enables an Aruba Mobility Controller (MC) to send AMON messages to an AirWave System?

• A. auth-server
• B. snmp-server
• C. mgmt-server
• D. tunneled-node-server

Answer: C

NEW QUESTION 6
An administrator sets up a firewall policy that implements split-tunneling for RAPs. Which firewall rule action should the administrator specify for traffic that the RAP should forward directly to the Internet?

• A. split-tunnel
• B. route:src-nat
• C. route:dst-nat
• D. permit

Answer: D

NEW QUESTION 7
Refer to the exhibit.

What can an administrator determine from this Aruba device output?

• A. A switch is connected to a standalone Mobility Controller.
• B. An AP is connected to a Mobility Controller in a cluster.
• C. An AP is connected to a standalone Mobility Controller.
• D. A switch is connected to a Mobility Controller in a cluster.

Answer: D

NEW QUESTION 8
A guest establishes an authenticated wireless session to an Aruba Mobility Controller (MC). The controller uses a ClearPass server for all AAA functions.
Which AAA component disconnects the user when the guest exceeds their allowed duration?

• A. RADIUS Change of Authorization
• B. Active Directory Session Limits
• C. RADIUS Authorization Profile
• D. SNMP Disconnect

Answer: A

NEW QUESTION 9
An administrator deploys Aruba Mobility Controller 7005s to a company’s branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers. Which controller command should the administrator use to implement this policy?

• A. no console enable
• B. no mgmt-user console
• C. mgmt-user console-block
• D. console disable

Answer: C

NEW QUESTION 10
An administrator configures two Mobility Masters (MMs) for redundancy and database synchronization. Which protocol transports database information between the two MMs?

• A. AMON
• B. SNMP
• C. IPSec
• D. VRRP

Answer: D

NEW QUESTION 11
Refer to the exhibit.

What is true about the operation of the Aruba Mobility Controller (MC) shown in the exhibit?

• A. The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.
• B. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
• C. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
• D. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.

Answer: D

NEW QUESTION 12
Refer to the exhibit.

What can be determined from the command output shown in the exhibit?

• A. The synchronized data is protected by VRRP.
• B. The command was executed on the standby Mobility Master (MM).
• C. The synchronization period is at its default value.
• D. The other Mobility Master (MM) is the active license server.

Answer: D

NEW QUESTION 13
An administrator wants to simulate network traffic and analyze results in an Aruba wireless network to test components such as WPA-2, DHCP, and other protocols. Which Aruba solution implements these functions?

• A. Clarity Live
• B. AirWave VisualRF
• C. AirWave RAPIDS
• D. Clarity Synthetic

Answer: B

NEW QUESTION 14
Refer to the exhibit.

The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

• A. The AP is configured to terminate on a non-cluster Mobility Controller.
• B. The AP is configured as a RAP to terminate on a stand-alone controller.
• C. The AP is configured as a RAP to terminate on a Mobility Master.
• D. The AP is configured to terminate on a Mobility Controller in a cluster.

Answer: C

NEW QUESTION 15
An administrator needs to modify a VAP used for a branch office RAP. The VAP’s operating mode is currently defined as backup and uses tunnel mode forwarding. The administrator wants to implement split-tunnel forwarding mode in the VAP.
Which WLAN operating mode must the administrator define for the VAP before the tunnel forwarding mode can be changed to split-tunnel?

• A. Persistent
• B. Standard
• C. Trusted
• D. Always

Answer: B

NEW QUESTION 16
An administrator has multiple AAA servers, some Microsoft RADIUS and some ClearPass. When 802.1X users authenticate, the administrator wants to ensure that the authentication requests are handled by the appropriate AAA server. Users enter their username in this format: username@domain_name.
What must the administrator implement to ensure the correct AAA server processes the authentication request?

• A. server matching rules for the VAP profile
• B. server matching rules for the server group
• C. server matching rules for the AAA profile
• D. server matching rules for the 802.1X profile

Answer: B

NEW QUESTION 17
An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?

• A. From apboot mode, execute purgeenv.
• B. From the AP’s ArubaOS CLI, execute write erase all.
• C. From the controller’s ArubaOS, execute write erase all.
• D. From apboot mode, execute factory_reset.

Answer: A

NEW QUESTION 18
Which VPN component must be configured on the Mobility Master (MM) to allow a RAP to use the built-in certificate to successfully connect to a Mobility Controller (MC)?

• A. IP Address pool
• B. VPN username and password
• C. IPSec pre-shared key
• D. CPSec auto-whitelist

Answer: C

NEW QUESTION 19
An administrator deploys an Aruba wireless solution comprised of:
-a pair of Mobility Masters (MMs)
-multiple Mobility Controllers (MCs) and virtual Mobility Controllers (VMCs)
-an AirWave server
-a ClearPass server
The Aruba Mobility solution runs ArubaOS 8.X.
Which component in this environment globally defines and deploys VLANs for wireless users?

• A. Mobility Controller or Virtual Mobility Controller
• B. AirWave server
• C. Mobility Master
• D. ClearPass server

Answer: A

NEW QUESTION 20
An administrator suspects that the network drops frames between a wireless client and an Aruba Mobility Controller (MC). The administrator wants to examine the frames between the AP and the controller to determine if any frames are missing.
Which solution allows the administrator to use a protocol analyzer to examine the contents of the 802.11 frames between the AP and controller?

• A. Implement bridge mode
• B. Implement decrypt-tunnel mode.
• C. Implement GRE mode.
• D. Implement split-tunnel mode.

Answer: A

NEW QUESTION 21
An administrator configures an ArubaOS switch for per-user tunneled node. Which protocol does the switch use to communicate with the Aruba Mobility Controller (MC)?

• A. GRE
• B. SSL
• C. PAPI
• D. IPSec

Answer: A

NEW QUESTION 22
Refer to the exhibit.

Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-A Mobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

• A. The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C1.
• B. The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C2.
• C. The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C2.
• D. The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C1.

Answer: B

NEW QUESTION 23
......