Rebirth 350-801 Exam Price For Implementing And Operating Cisco Collaboration Core Technologies Certification

NEW QUESTION 1
An administrator is in the process of moving Cisco Unity Connection mailboxes between mailbox stores. The administrator notices that some mailboxes have active Message Waiting Indicators. What happens to these mailboxes when they are moved?

• A. The move will fail if MWI status is active.
• B. The MWI status is retained after a mailbox is moved from one store to another.
• C. If the source and target mailbox store are not disabled, MWI status is not retained.
• D. Moving the mailboxes from one store to another fails if MWI is turned on.

Answer: B

NEW QUESTION 2
What are two Cisco UCM location bandwidths that are deducted when G 729 and G.711 codecs are used? (Choose two.)

• A. If a call uses G.729. Cisco UCM subtracts 16k.
• B. If a call uses G.711, Cisco UCM subtracts 64k
• C. If a call uses G.711, Cisco UCM subtracts 80k
• D. If a call uses G.729. Cisco UCM subtracts 24k.
• E. If a call uses G.729. Cisco UCM subtracts 40k

Answer: CD

NEW QUESTION 3
What is the function of the Cisco Unity Connection Call Handler?

• A. routes calls to a user based on caller input
• B. queues calls
• C. allows customized scripts for IVR capabilities
• D. searches a list of extensions until the call is answered

Answer: A

Explanation:
A Cisco Unity Connection Call Handler is a software application that answers calls, plays greetings, and routes calls to users based on caller input. Call handlers can be used to create automated attendants, voice menus, and other interactive voice response (IVR) applications.
Call handlers are created and managed using the Cisco Unity Connection Administration interface. When creating a call handler, you can specify a variety of settings, including the greeting that is played, the caller input options that are available, and the destination that calls are routed to.
Call handlers are a powerful tool that can be used to create a variety of IVR applications. By using call handlers, you can improve the efficiency of your organization's communications and provide a better experience for your callers.
Here are some additional tips for using call handlers:
Use call handlers to create automated attendants that can answer calls and route them to the appropriate person or department.
Use call handlers to create voice menus that can provide callers with information or options.
Use call handlers to create interactive voice response (IVR) applications that can collect information from callers and process their requests.

NEW QUESTION 4
Refer to the exhibit.

https://i.postimg.cc/wMYy0Fhm/image.png
Drag and drop the flow step labels from the left into the correct order on the right to establish this call flow:
• User 1 calls user 2.
• User 2 answers the call
• user 2 disconnects the call

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5
Refer to the exhibit.

When a UC Administrator is troubleshooting DTMF negotiated by this SIP INVITE, which two messages are examined next to further troubleshoot the issue? (Choose two.)

• A. REGISTER
• B. SUBSCRIBE
• C. PRACK
• D. NOTIFY
• E. UPDATE

Answer: BD

NEW QUESTION 6
When configure Cisco UCM,which configuration enables phones to automatically reregister to a Cisco UCM publisher 'when the connection to the subscriber is lost?

• A. SRST
• B. Route Group
• C. Cisco UCM
• D. Device Pool

Answer: A

Explanation:
SRST, or Survivable Remote Site Telephony, is a feature that allows Cisco IP phones to continue to function even when the connection to the Cisco UCM publisher is lost. When SRST is configured, the phones will automatically reregister to the publisher when the connection is restored.
Route groups are used to route calls to different destinations based on the caller's phone number or other criteria. Cisco UCM is the call management system that controls the IP phones. Device pools are used to group phones together for administrative purposes.

NEW QUESTION 7
A company has an excessive number of call transfers to local and long-distance PSTN from Cisco Unity Connection voicemail. Which action in the Cisco Unity Connection restriction table resolves this issue?

• A. Block PSTN patterns on Default Transfe
• B. Default Outdia
• C. and Default System Transfer.
• D. Implement password complexity on voicemail boxes to prevent accounts from being compromised.
• E. Create a custom restriction table ??????????? and block it.
• F. Create a custom restriction table **********and block it.

Answer: A

NEW QUESTION 8
What is a reason for using a Diffserv value of AF41 for video traffic?

• A. Video traffic cannot tolerate any packet loss and has a latency of 150 miliseconds
• B. Video traffic can tolerate up to 10% packet loss and latency of 10 seconds
• C. Video trafic can tolerate up to 5% packet loss and latency of 5 seconds
• D. Video traffic can tolerate a packet loss of up to 1% and latency of 150 milliseconds

Answer: D

NEW QUESTION 9
A SIP phone has been configured in the system with MAC address 0030.96D2.D5CB. The phone retrieves the configuration file from the Cisco UCM. Which naming format is the file that is downloaded?

• A. SIP003096D2D5CB.cnf.xml
• B. SEP003096D2D5CB.cnf.xml
• C. SEP003096D2D5CB.cnf
• D. SIP003096D2D5CB.cnf

Answer: B

NEW QUESTION 10
Refer to the exhibit.

The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?

• A. Payload type 110 was negotiated rather than type 101.
• B. DTMF was negotiated property in these messages.
• C. DTMF was not negotiated on the call.
• D. G.729 rather than G.711ulaw was negotiated.

Answer: C

NEW QUESTION 11
Which external DNS SRV record must be present for Mobile and Remote Access?

• A. _cisco-uds.Jcp.example.com
• B. _collab-edge._tls.example.com
• C. _collab-edge._tcp.example.com
• D. _cisco-uds._tls.example.com

Answer: B

NEW QUESTION 12
Which command in the MGCP gateway configuration defines the secondary Cisco UCM server?

• A. ccm-manager redundant-host
• B. ccm-manager fallback-mgcp
• C. mgcpapp
• D. mgcp call-agent

Answer: A

NEW QUESTION 13
Which two steps are required for bulk configuration transactions on the Cisco UCM database utilizing BAT? (Choose two.)

• A. A data file in Abstract Syntax Notation One format must be uploaded to Cisco UCM
• B. A server template must be created in Cisco UCM
• C. A data file in comma-separated values format must be uploaded to Cisco UCM
• D. A data file in Extensible Markup Language format must be uploaded to Cisco UCM
• E. A device template must be created in Cisco UCM

Answer: CE

NEW QUESTION 14
According to QoS guidelines, what is the packet loss for streaming video?

• A. Not more than 8%
• B. Not more than 1%
• C. Not more than 3%
• D. Not more than 5%

Answer: B

NEW QUESTION 15
Users want their mobile phones to be able to access their cisco unity connection mailboxes with only having to enter their voicemail pin at the login prompt calling pilot number where should an engineer configure this feature?

• A. transfer rules
• B. message settings
• C. alternate extensions
• D. greetings

Answer: C

NEW QUESTION 16
An engineer is configuring a Cisco Unified Border Element to allow the video endpoints to negotiate without the Cisco Unified Border Element interfering in the process. What should the engineer configure on the Cisco Unified Border Element to support this process?

• A. Configure path-thru content sdp on the voice service.
• B. Configure a hardcoded codec on the dial peers.
• C. Configure a transcoder for video protocols.
• D. Configure codec transparent on the dial peers.

Answer: D

NEW QUESTION 17
An engineer is configuring a phone system CISCO UCM and wants to activate TFTP service. The engineer selects the serviceability page for configuration. Which nodes configurable for TFTP?

• A. any two nodes
• B. any node
• C. only nodes that have Cisco UCM service enabled
• D. any subscriber nodes

Answer: C

Explanation:
TFTP is a network protocol that is used to transfer files between devices. It is often used to transfer firmware and configuration files to network devices. In order to use TFTP, the device must have a TFTP server configured.
In Cisco UCM, the TFTP server is configured on the serviceability page. The TFTP server can be configured on any node that has Cisco UCM service enabled. The TFTP server cannot be configured on nodes that do not have Cisco UCM service enabled.

NEW QUESTION 18
Which command must be defined before an administrator changes the linecode value on an ISDN T1 PRI in slot 0/2 on an IOS-XE gateway?

• A. isdn incoming-voice voice
• B. pri-group timeslots 1-24
• C. card type t1 0 2
• D. voice-port 0/2/0:23

Answer: C

NEW QUESTION 19
Refer to the exhibit.

A customer submits this debug output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with an ISDN BRI interface, which BRI changes resolve the issue?

• A.
• B.
• C.
• D.

Answer: C

NEW QUESTION 20
How many minutes does it take for automatic fallback to occur in a Presence Redundancy Group if the primary node lost a critical service?

• A. 5 min
• B. 10 min
• C. 30 min
• D. 60 min

Answer: C

NEW QUESTION 21
......