High quality 300-075 Braindumps 2021

Your success in 300 075 ciptv2 is our sole target and we develop all our 300 075 vce in a way that facilitates the attainment of this target. Not only is our 300 075 vce material the best you can find, it is also the most detailed and the most updated. 300 075 ciptv2 for Cisco 300-075 are written to the highest standards of technical accuracy.

Free 300-075 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
You need to verify if the Media Gateway Control Protocol gateway is enabled and active. Which command should you use for this purpose?

  • A. show running-config
  • B. show fallback-mgcp
  • C. show gateway
  • D. show ccm-manager fallback-mgcp
  • E. show running-config gateway
  • F. show fallback-mgcp ccm-manager

Answer: D

NEW QUESTION 2
In a distributed call processing network with locations-based CAC, calls are routed to and from
intercluster trunks. Which trunk type is implemented in this network?

  • A. intercluster trunk with gatekeeper control
  • B. intercluster trunk without gatekeeper control
  • C. SIP trunk
  • D. h225 trunk

Answer: B

NEW QUESTION 3
When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully?

  • A. dial peers that address all sites in the multisite cluster
  • B. translation patterns that apply to the local PSTN for each gateway
  • C. incoming and outgoing COR lists
  • D. configuration of the gateway as an MGCP gateway

Answer: B

NEW QUESTION 4
Which component provides a list of Cisco Unified Communications Manager node addresses that
allow the phone to register to the cluster?

  • A. DNS option 150
  • B. DHCP option 150
  • C. DHCP option 66
  • D. configuration file from TFTP server
  • E. Primary Cisco Unified Communications Manager node from configuration file additional nodes during registration.

Answer: B

NEW QUESTION 5
In which two locations can you verify that a phone has a standby Cisco Unified communications
manager? (Choose two)

  • A. phone webpage
  • B. RTMT
  • C. Cisco Unified Serviceability
  • D. phone menu

Answer: AD

NEW QUESTION 6
When troubleshooting high CPU utilization within the Command Line Interface (CLI) of a Cisco
Unified Communications Manager (CUCM). Which command will show the process CPU usage for all processes?

  • A. show network status
  • B. show pert query counter Process"% CPU Time"
  • C. show pert query counter Partition"% Used"
  • D. show pert query counter Process "Process Status"

Answer: B

NEW QUESTION 7
What is the default DSCP value for Cisco Tele Presence calls in Cisco Unified Communications
Manager?

  • A. 24
  • B. 32
  • C. 46
  • D. 26
  • E. 34

Answer: E

NEW QUESTION 8
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones.
The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DNS Server:
300-075 dumps exhibit
Device Pool:
300-075 dumps exhibit
Expressway:
300-075 dumps exhibit
ILS:
300-075 dumps exhibit
Locations:
300-075 dumps exhibit
MRA:
300-075 dumps exhibit
Speed Dial:
300-075 dumps exhibit
SIP Trunk:
300-075 dumps exhibit
The intercluster URI call routing no longer allows calls between sites. What is the reason why this would happen?

  • A. Wrong SIP domain configured.
  • B. User is not associated with the device.
  • C. IP or DNS name resolution issue.
  • D. No SIP route patterns for cisco.lab exist.

Answer: CD

NEW QUESTION 9
Which device must be responsible for properly making network traffic when a cisco ip phone is
connected to a cisco switch?

  • A. core layer switch
  • B. access layer switch
  • C. branch router
  • D. Cisco IP phone

Answer: B

NEW QUESTION 10
On which two call logs is the media encryption enforced in a Collaboration Edge design? (Choose
two)

  • A. Expressway-C to internal endpoint
  • B. Expressway-E to outside-located endpoint
  • C. Expressway-C to Expressway-E
  • D. Expressway-E to Cisco Unified Communications Manager
  • E. Expressway-C to Cisco Unified Communications Manager

Answer: BC

NEW QUESTION 11
Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?

  • A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
  • B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
  • C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
  • D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.

Answer: A

NEW QUESTION 12
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent the
local cluster from routing calls to a specific pattern learned via ILS What should be configured within the local CUCM cluster to accomplish this?

  • A. Create a block transformation pattern.
  • B. Create a block route pattern.
  • C. Create a block translation pattern.
  • D. Create a block learned pattern.

Answer: C

NEW QUESTION 13
Which feature allows you to specify which endpoints ring when someone calls a user on a specific
destination ID?

  • A. FindME
  • B. Extension Mobility
  • C. Speech Connect
  • D. Single Number Reach

Answer: A

NEW QUESTION 14
Which three globalization dialing functions are enhanced in Cisco Unified Communications Manager 7.x and later? (Choose three.)

  • A. MGRL
  • B. HO
  • C. CER
  • D. AAR
  • E. SAF
  • F. click-to-call

Answer: BCE

Explanation:
Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/9x/uc9x/dialplan.html (benefits of new design approach)

NEW QUESTION 15
The VCS Expressway can be configured with security controls to safeguard external calls and endpoints. One such option is the control of trusted endpoints via a whitelist. Where is this option enabled?

  • A. on the voice-enabled firewall at the edge of the network
  • B. on the VCS under Configuration > registration > configuration
  • C. on the TMS server under Registrations > whitelist
  • D. on the VCS under System > configuration > Registrations

Answer: B

NEW QUESTION 16
Refer to the exhibit.
300-075 dumps exhibit
Which configuration change is needed to enable NANP international dialing during MGCP fallback?

  • A. Change the dial peer to dial-peer voice 901 voip.
  • B. Change the dial peer to dial-peer voice 9011 pots.
  • C. Add the command prefix 011 to the dial peer.
  • D. Add the command prefix 9011 to the dial peer.

Answer: C

NEW QUESTION 17
Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to
a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)

  • A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
  • B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.
  • C. Create one neighbor zone in VCS for each Unified CM node.
  • D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
  • E. In VCS set Unified Communications mode to Mobile and remote access and configure eachUnified CM node.

Answer: AD

NEW QUESTION 18
If delegated credentials checking has been enabled and remote workers can register to the VCS
Expressway, which statement is true?
A secure neighbor zone has been configured between the VCS Expressway and the VCS Control.

  • A. SIP registration proxy mode is set to Oft in the VCS Expressway.
  • B. H.323 message credential checks are delegated.
  • C. SIP registration proxy mode is set to On in the VCS Expressway.

Answer: B

Thanks for reading the newest 300-075 exam dumps! We recommend you to try the PREMIUM Surepassexam 300-075 dumps in VCE and PDF here: https://www.surepassexam.com/300-075-exam-dumps.html (245 Q&As Dumps)